My helmet is way older then this one. I doubt they even have anything to replace the lined in my old helmet. I use new helmets now, just wanted to look and see if a very old helmet can be fixed. I think my helmet is from the 1960s or 1070s. Its a red white and blue half helmet. It was my very first helmet. Its the kind of helmet bikers love to collect. Make an old school bike, want and old school helmet to go with it. I made a video a long time ago of my gear, and i added this with all the helmets i had back then. I think i have around 10 helmets now. I think i had around 7 helmets back then.
@dislikebutton1935
5 жыл бұрын
i thought this was a raymond carver poem till the end now i'm sure it is
@Pedro-944
3 жыл бұрын
I want to wash my liner but I can't remove it from my bonanza helmet. It's nowhere as easy as you make it look. I feel that I'm going to break the liner. Any suggestions?
@mpriddy313
6 жыл бұрын
If my liner went back in that easy, I would not have needed to search for this video.... Of all the helmets I've owned over the years, the Biltwell liners are the worst for re-install. I'm a handy person too. The liner design is just cheap. It's unfortunate as the aesthetic is great.
@Pedro-944
3 жыл бұрын
I'm struggling to remove it to wash it. Any suggestions?
@angiefav1847
4 жыл бұрын
I thought it was hard to remove but patience is the key my friend it's not that bad great helmet though
@clalvarez2678
3 жыл бұрын
Do I need to take special care to wash the lining? Or can I just throw it in the washing machine along with other clothes?
@HaterPro-yv5ip
7 жыл бұрын
Thanks for making great products and how to's.
@andresjorgegonzalezmontano930
2 жыл бұрын
i bought a biltwell gringo ECE helmet size XL but i realized that my correct size is L, so i would like to know that if i change the cheek pads and liner size L, my gringo helmet would fit better, Please..
@mlbb011594
2 жыл бұрын
Can fit intercoms in this helmet?
@filcandiy
4 жыл бұрын
I have a question, where can we buy a replacement helmet liner? And my other question is , i bought this helmet scorpion exo 1000 brand new 12 years ago and never been used ever since? It was just stored in my closet. For some reason i was not able to continue my m licensing but now im back and i can now use this helmet ? Im thinking of replacing the liner padding even though it looks new like , no sign of defects?im just concerns of the expiration of the liner padding
@doctorgorrell
5 жыл бұрын
Great job
@murraygrande242
5 жыл бұрын
My girlfriend's small Gringo S liner wouldn't go back in. After wrestling with it for a half hour, I tried working from front to back (opposite of the video) and it slid right into position easy-peasy.
@howartthou
5 жыл бұрын
thanks! Why isn't this in the instructions?
@nunovzkyy
5 жыл бұрын
Hi guys I bought a gringo S size M but i realize later that is too big to me Can i change the interior for size XS? thanks
@BiltwellCycleParts
5 жыл бұрын
If you currently have a size Medium, then you can swap it to a small liner but not the XSM. The XSM has its own dedicated EPS and liner and you would not have a true fitment.
@nunovzkyy
5 жыл бұрын
@@BiltwellCycleParts but if i change for size S it will fit ? thanks
@r1ch3b31
7 жыл бұрын
Can I change the liner size on my XL bonanza to a Large?
@BiltwellCycleParts
7 жыл бұрын
You can switch it out, but the the XL and Large sizes have the same liner. The only thing that will change is the cheek pads on the large will be slightly thicker, giving you a little bit tighter fit around the cheek area. If you have any more questions or need more help you can always email us at Tech@biltwellinc.com
@rastakind3
6 жыл бұрын
So you can actually buy an XL helmet and put in the Large liner and it will fit like a Large?
@ZROADHOG
7 жыл бұрын
Hey guys, question, just replaces the liner on my Gringo, when I took off the old one I noticed the styrofoam shell was completely loose, like it shrunk or as if the outer shell kind of expanded, is this normal? The helmet felt good after installing the new liner but I'm just wondering.
@BiltwellCycleParts
7 жыл бұрын
Hey Zroadhog, The EPS impact foam should have some play, giving room for the ends of the liner seat in. But shouldn’t move too much. If you have any issues, please contact us at warranty@biltwellinc.com
@ZROADHOG
7 жыл бұрын
Will do, 'cause this thing is moving around quite a bit.
@ZROADHOG
7 жыл бұрын
Alright, message sent, hopefully I can get a reply soon.
@motosource3920
3 жыл бұрын
New liner, new scratches on the helmet too.🤦♂️
@mcpc80
4 жыл бұрын
Just ordered the Gringo Liner / Cheek Pads, and Biltwell send me the Bonanza (??) Liner and Cheek Pads... Cheap company.... -_-
@jessicasommy1741
5 жыл бұрын
Just go to Stodoys website if you want to know how to make it yourself.
Пікірлер: 27