A lot of ignorant and rude comments on here. You did a great job! I love the colors on that knife. Thank you for sharing! 1. A craftsman is not made great by his tools. His tools are made great by his craftsmanship. 2. The buck 110 is a legendary knife that goes back generations of deer hunters. It’s all I’ve used for my 20+ deer.
@jeremiahjohnson9908
2 жыл бұрын
That is beautiful, I never would have thought of hackberry as a knife scale, but that turned out just gorgeous. Great work.
@davidpethel6229
5 жыл бұрын
Customized so many during the 70s lost count, even put finger grooves before they were commercially available, Did it for my friends as gifts , used a lot of horn and some stag !. Even today will be hanging out with my friends and they bring them out at our cookouts ! Makes you feel good your friends are so proud of them !
@rushtonworks9186
5 жыл бұрын
Nice, made a few for family and friends and they won't use them not wanting to "mess" them up-become Sunday carry knives
@davidrennie3402
2 жыл бұрын
Mate I read all the comments, I just dont get some people. How you achieve your Art is immaterial, what you use, what you can afford maters not. The things that mater are did you enjoy yourself, You can see you did. Did you create something unique and different, Most defiantly. Did you do it your way, "Hell Yer" and thats all that maters. Some of the wankers who commented need to go get lives mate. Thank you for taking the time to show us how and what you can do. Bless Dave
@rushtonworks9186
2 жыл бұрын
Appreciate that, my tools are not anchored because I have Spina Bifida and I prefer to work directly on the ground. Yes, people don't know what they don't know, thanks 👍
@hillbilly4christ638
2 жыл бұрын
I like the matte finish on the scales contrasted with a high shine on the bolsters. You encouraged me to try this on an old 110 that I have. I have some finely curled maple that I want to finish like an old muzzleloader.
@rushtonworks9186
2 жыл бұрын
I've done curled maple wood as well. It's a great choice. Good luck!
@dennisblauvelt1773
5 ай бұрын
Excellent Craftmanship!
@ElfAzzid
5 жыл бұрын
Lot of criticism here. Chill people. Anyway... I have a knife very much like this one. Imitation I think. But it was my Fathers. He had it for a very long time, and its seen a lot of use. He passed in 2007, and Ive had his knife since. I'd like to restore it. One of the scales is missing al together. I think Im going to repin it as well though. Thanks for the tutorial!
@williamfoster9024
4 жыл бұрын
That was a grate movie you show us. I love the blue too. Thank you Mister for teach us how! Ok by.
@miman-ck9jv
5 жыл бұрын
Show us your work in the sunlight ☀️👍
@larryalbritton4762
4 жыл бұрын
Thanks for the reply and info.Not everyone will reply to my question,I am just starting at the age of 65,And it all new to me,but i love knives,I have about 700 in my collection,and i am doing some restore work for local people,i can get all the work i want,I Made fishing rods for 30 years and have a lot of customers,People know that it has to be perfect for me,that is why i asked about pins,I want it to be the best i can get it,I also sharpen knives with my new Wicked Edge Sharpener,If you haven't tried it you will love it,And you say something about it on your utube and tell them and they may send you one,Good Luck and God Bless
@randyfukuda8562
5 жыл бұрын
Beautiful!! That is a labor of love!!
@RobertRichardson-f2p
Ай бұрын
No need to peen main pin.If you cut it in half,you will have a backup piece.Just sand main pin until it reaches both sides of brass liners
@brucepugsley8115
5 ай бұрын
Have you rescaled a Buck 110 Auto? Or any plans to do so? Thanks love your work!
@rushtonworks9186
5 ай бұрын
Thanks, I own two but I'm not brave enough lol
@brucepugsley8115
4 ай бұрын
@@rushtonworks9186 I bought some awesome bone scales, but I’d like to see if anyone has done one. I’m thinking it’s about the same as non auto 110’s except the push button.
@christopherrobinson9690
4 жыл бұрын
Practice makes perfect. Keep honing the skill brother!!
@rushtonworks9186
4 жыл бұрын
Thanks!
@tested123
3 жыл бұрын
can you do one where you keep the scales bulky and carve in finger flutes. nice rounded edges. that would be unique.
@LeaverAction
4 жыл бұрын
Very nice !
@gentlemensedge5503
4 жыл бұрын
Nice work. I know it's a lot of work to make even the simplest videos. I also make scales but for straight razors. Now I know what I'm going to do with the scale material I have over here..
@carmineredd1198
3 жыл бұрын
Dorko
@guysolis5843
3 жыл бұрын
@@carmineredd1198 Dorko? I own a Solingen Dorko..you?
@carmineredd1198
3 жыл бұрын
@@guysolis5843 Dorvo
@kamikazekunze
4 жыл бұрын
Love it, great job!
@TheRedhawke
4 жыл бұрын
Very nice
@vincentrosa9631
5 жыл бұрын
Professional job
@bumstudios8817
3 жыл бұрын
Wow!
@ProdigalSuns
4 жыл бұрын
Would you use these scales again? Looks good to me.. great video
@rushtonworks9186
4 жыл бұрын
I would and did a few more with resin wood hybrids-thanks for looking!
@jonnycola5398
5 жыл бұрын
Looks amazing
@Aidan_Heikell_
5 жыл бұрын
I would have to agree.
@jamespolucha6911
2 жыл бұрын
How do you stop the epoxy from going inside threw the pin holes
@ButterbeanOutdoors
4 жыл бұрын
Awesome job man. When you are hand sanding it down will the sand paper scuff up the bolsters? and if so can you buff the scuffs back out or just need to be careful?
@rushtonworks9186
4 жыл бұрын
Yes, you sand across the bolsters so you know your scales are flush with them. If you do it right you cannot tell where the scale ends and the bolster begins. If you start with 80-100 grit you end with 1000-1200 which allows you to then polish the bolsters just for a nice mirrored shine.-good luck!
@ButterbeanOutdoors
4 жыл бұрын
@@rushtonworks9186 thanks! this is so awesome
@rushtonworks9186
4 жыл бұрын
Thanks, I'd tape off the scales once you are ready to buff the bolsters or you will darken the scales. I've done that.
@ButterbeanOutdoors
4 жыл бұрын
@@rushtonworks9186 good tip. Thanks so much
@6ty8stang
4 жыл бұрын
Not sure if it’s too late but the scales that you sanded too much will fit on a 112 which is a smaller version of the 110
@ethanheikell4785
5 жыл бұрын
good job uncle
@Pro-tz5oi
3 жыл бұрын
good afternoon dear friend!how much does your work cost this knife.ready to buy with delivery to Russia
@rushtonworks9186
3 жыл бұрын
Never shipped to Russia. $175 plus shipping
@careembombi1845
8 ай бұрын
i wouldn't have done it this way ?! i woold have kept the wooden pieces
@jeffreymoore9002
5 жыл бұрын
Cut out the Music please! Nice work! Also You Real don't need to mess with the scale pins just the big one! That way you don't bust up Your old scales! Just a little tip from trial and error! God Bless and again nice work!
@TRUTHandANSWERS
3 жыл бұрын
How did you not scratch the brass bolsters?
@rushtonworks9186
3 жыл бұрын
They do get scratched but as you go from heavier to finer sandpaper they disappear until you buff and polish
@jeffreymoore9002
5 жыл бұрын
Iv'e been thinking about using some Petrified Wood like was gifted to me for some scales! Just don't have the means to cut it right now.
@rushtonworks9186
5 жыл бұрын
I have some mammoth teeth I hope to do one of these days. Yes, much harder to do petrified wood too.
@matttherrien9608
2 жыл бұрын
That was a great idea. Some of that Indonesian petrified wood is absolutely beautiful.
@sandymilne224
4 жыл бұрын
You probably now know you didn’t need to punch in the scale pins... only the silver lock back pin. The other ones come out when the scales are pried away from the knife with your plastic spatula. You made more work for yourself.
@rushtonworks9186
4 жыл бұрын
I have to disagree with you. They do not come off when scales are pried away
@sandymilne224
4 жыл бұрын
Rushton Works: Check out the following video: Buck 110 Customization - How to Replace Scales See how this guy did it.
@rushtonworks9186
4 жыл бұрын
@@sandymilne224 I've done this a dozen times and I've never had those scales just pop out and as I said in the video you are more likely to mar the metal prying at them and yes I've seen his video. Try it either way and see if you are more successful at popping them off than I have been.
@neeko7878
5 жыл бұрын
Just a question... no judgement here... Do you do all of your work sitting down on the concrete??? Nice finish job on the scales! They look solid. Do you have good experience with that epoxy holding?
@rushtonworks9186
5 жыл бұрын
I have Spina Bifida and I find that sitting on the ground the least painful way to work, and most balanced
@rushtonworks9186
5 жыл бұрын
Never had any issues with epoxy not holding, thanks for the compliment on the finish-never exactly know what you are going to get til it's done.
@larryalbritton4762
4 жыл бұрын
Nice work,But do you need any pins to hold the scales on? Or will the glue hold them,Thanks
@rushtonworks9186
4 жыл бұрын
I've done a dozen of these without pins and had no issues You can order a custom Buck from them without pins as well so you shouldn't have any issues. Thanks for looking!
@larryalbritton4762
4 жыл бұрын
Sorry to worry you but i am a beginner knife restorer and i have a question or two.You seam very knowledgeable .I am restoring some old Case XX knives,Cleaning and putting Stag scales on them.What brand of glue do you recommend and do i need to pin them on. Thanks very much.Albritton Wholesales
@rushtonworks9186
4 жыл бұрын
@@larryalbritton4762 didn't mean to sound defensive but some comments make it seem that you have to have pins. You do not. I used a generic two part apoxy and if you clamp then overnight it really holds well. If you're using deer horn scales try to cut them just larger than the bolsters so when you sand them flush you don't take off the pattern. Good luck!
@gcalvaro
5 жыл бұрын
Wowwwww Wowwwww Wowwwww 😍
@artm6723
5 жыл бұрын
Didn't you say you were going to use the plastic putty knife so you wouldn't mar the brass?
@rushtonworks9186
5 жыл бұрын
Didn't need it because on this knife they just popped out
@austen4651
4 жыл бұрын
Is the buck 110 illegal in Canada?
@rushtonworks9186
4 жыл бұрын
I don't believe it's illegal but I'm not 100%
@ats440you
3 жыл бұрын
Not sure, but in most Commonwealth countries a locking blade is considered an offensive weapon.
@matttherrien9608
2 жыл бұрын
It falls under the "grey area" concept of the law.
@darksoul4961
4 жыл бұрын
How much do you charge to replace scales?
@mr.wingmaster3645
5 жыл бұрын
Do you only do custom work for yourself or do you do if for others as well?
@rushtonworks9186
5 жыл бұрын
Yes, I do custom work for others. What do you have in mind?
@beacondog2440
5 жыл бұрын
Ivory or polished bone grips with ingriving
@rushtonworks9186
5 жыл бұрын
@@beacondog2440 haven't tried that
@CaptDavesSportfishing
3 жыл бұрын
I was wondering what the heck I thought you were going to put the pins back in that's the reason I watched put it back to original just with different scales with glue in it on is kind of I don't know doesn't seem right
@rushtonworks9186
3 жыл бұрын
Never had an issue with no pins. If you order a custom Buck off their sight you can get them without pins.
@CaptDavesSportfishing
3 жыл бұрын
@@rushtonworks9186 not a issue, but not ''original'ish''.....and more skillfull to do so. ''if ya had a real work bench and a chair'' 🙄
@rushtonworks9186
3 жыл бұрын
Have those things, but with Spina Bifida, I prefer the ground. To each his own.
@CaptDavesSportfishing
3 жыл бұрын
@@rushtonworks9186 I prefer boats!
@davidhoward5586
5 жыл бұрын
I can’t believe that his tools are wobbling all over the place lol.
@ArtVanAuggie
4 жыл бұрын
Oh boy, if you sand too far you can put spacers on the scales and sand them to fit.
@shotgunsherman
4 жыл бұрын
You know thats a scroll saw not a jig saw. If you tighten the arm tight on the side it will help hold down your piece while cutting it shouldnt go crazy moving around on you
@rushtonworks9186
4 жыл бұрын
Yes, a scroll saw that was definitely conversational
@78chevys87
5 жыл бұрын
You didn't pute pins back in !!
@PBJason
4 жыл бұрын
Ok. Cig fast fertig
@norman1826
5 жыл бұрын
you won't ever touch any of my knives....that knife just got messed up.......believe it.
@user-lm7px3mg1i
5 ай бұрын
You're stupid
@ArtVanAuggie
4 жыл бұрын
Oh boy again, put Vaseline on parts you don't epoxy to stick to.
@rushtonworks9186
4 жыл бұрын
Thanks for the tip
@garrockwaters304
3 жыл бұрын
Why use such garbage for tools? I would be ashamed to show such crap. Any pride at all? I can't take anything seriously that such a poor craftsman would do with them!
@rushtonworks9186
3 жыл бұрын
The results speak for themselves. I stand by them.
@garrockwaters304
3 жыл бұрын
@@rushtonworks9186 I expected someone of your caliber would have better tools.
@rushtonworks9186
3 жыл бұрын
@@garrockwaters304 raise kids not tools
@buudy22
2 жыл бұрын
You do not understand craftsmanship at all. Ignorant. The man makes the tools. The tools don’t make the man.
@lcpeterbilt379
5 жыл бұрын
Lol why? Those crappy buck knives are not worth the effort..
@Orion9993
5 жыл бұрын
Buck 110 are crappy knives? Seriously?? They started the folding knives and the MOST copied design. *rolls eyes*
@RecklessFables
4 жыл бұрын
It is a freaking workhorse. People in the are skewing the perception of what "good" is with all these expensive knives that never get used. I'm not saying I'd put $300 scales on a 110, since I'd be using it, but crappy? Nah.
@TheRichardc123
4 жыл бұрын
Bucks heat treat of stainless HC holds it's own in the field better than a lot of modern super steels. Someone must have watched a Lynn Thompson video to call Buck crappy...
@SemicrazyMagatrucker
5 ай бұрын
Hahahaha they have been making buck knives before you was born. They create the back lock system. All knives that have a lock release on the end of the tang uses this same design. Billions of knives been built using this crappy design.. so odd. One of the most successful knife company in the history of the known Universe. You should learn, then speak.
@FreddyVictorieux
5 жыл бұрын
It's a pity you talk so much, but nice work!
@buudy22
2 жыл бұрын
It’s a pity you comment so much but nice picture.
@Vultureswag
4 жыл бұрын
Not impressed with your tools
@buudy22
2 жыл бұрын
Nice jerk comment bud. I know guys with great tools and no talent. The best craftsman can do great work with whatever tools they have.
Пікірлер: 106