The proper tools and doing it right the first time is the best way.
@yogmoto4221
2 жыл бұрын
Another great video!! Thank you for doing these! I always learn something!
@skrillababygees
Ай бұрын
Thank you so much! Helpful video
@UnknownCoatings
Ай бұрын
Glad it was helpful!
@LUNARWIL3441
2 жыл бұрын
💯👍🤴🪄🚗good video and very professional as always thank you
@christopherlister8932
2 жыл бұрын
Welcome back man!
@kristianirvine4192
2 жыл бұрын
Nice to see you doing videos again
@timharsch5896
2 жыл бұрын
Sean while I got your ear and you keep answering my questions I have one more for you my Chrysler 300 top and lower front grills are made of plastic and I'd like them to be powder coated is that possible considering they have to be heated to be cured?
@farleyj1999
2 жыл бұрын
Welcome back my friend
@mikaeltjrnelund2724
2 жыл бұрын
hey I am about to start a little powder coating at beginner level in Denmark I'm very interested in the accessories you have to put your rims on. in the sandblaster. and when you generally handle rims so they are easy to work with I'm also interested in what's easiest to bend can see you use masking tape and you use a vacuum cleaner to remove powder where you have put another fave what is best Mikael skoven Tjørnelund
@razclinton
2 жыл бұрын
Great video, we are a small startup company from the UK but are struggling with a chemical to strip powder coating off, any ideas would be so amazing
@Mrchong405
2 жыл бұрын
Great channel. Thank you, subscribed
@upSLIDEdown
2 жыл бұрын
Hey brother, ran across your hour long video on KZitem on resealing 3pc wheels, and now this one too. Seemed like you had a lot of knowledge on the subject and were very open to questions. I have a set of 18" Equip 05s I plan to pull apart and refinish sometime soon. I've unfortunately neglected them outside for years. They're reverse lips and the lips were already stripped and polished aluminum, so I'll have to go back down to wet sanding to repolish. All this to say, you seemed to know your bolts. These have the gold finished Work bolts. Some of them have some rust on them now unfortunately. Is there a way to clean them up without losing the gold finish that you know of? I could buy new gold hardware from someone else, but they won't have "WORK" on the flanges. And I'm not paying Work's price for new bolts. Lmao. Any input is greatly appreciated bud. The video was great and I definitely feel a lot more confident in tearing them down now. Thanks in advance!
@alancardenas8928
2 жыл бұрын
Great video do u mind sharing what silicon to use
@machinetradereurope7853
5 ай бұрын
Can you use Pattex Nural 62 ? has 25 min drying time
@Logan-Whatsittoya
Жыл бұрын
Where's the best place to get 90° Valve stems? Got some jdm Advan Impul RS3 wheels that have those and they're rough so I'm looking for new ones
@julesmendoza5713
Жыл бұрын
What would happen if there are airbubbles on the seal? Would I have to reseal it?
@timeload343
2 жыл бұрын
Unrelated question: how often do you clean your hooks for hanging parts?
@harold83612
9 ай бұрын
Has that rim eva came back & if so how long ?
@MonsieurDonkey
Жыл бұрын
Could I use a wire wheel from the beginning?
@Shore32NC
2 жыл бұрын
I was just thinking.. Dang When is UC going to start posting again...
@jamesmills3048
2 жыл бұрын
Great videos about powder coating what powder coat do you recommend for the best gold look in powder coat ?
@UnknownCoatings
2 жыл бұрын
depends on the type of gold, do you mean gold plating?
@unfinishedbusiness830
Жыл бұрын
the hardware on the Faces are TTY.. Meaning they can only be torqued ones, and then have to be replaced and cant be reused... unless they are ARP
@UnknownCoatings
Жыл бұрын
Really depends on the manufacturer, speaking in blanket statements is what makes people look.dumb
@UnknownCoatings
Жыл бұрын
Oh also, this video is literally about resealing a wheel without removing the hardware. So your comment is even more ridiculous
@scottbrown8142
2 жыл бұрын
Enjoy your channel… off topic here but can you salvage a part that didn’t get completely coated after curing, can you shoot it again or start over?
@UnknownCoatings
2 жыл бұрын
if you scuff the whole part with scotch bright, or 400ish grit paper, you can typically respray it all without starting over.
@scottbrown8142
2 жыл бұрын
@@UnknownCoatings thank you, I’m struggling but I guess it’s all part of learning
@robertgregory1191
2 жыл бұрын
Could you tell me what the best zinc powder is? And how long is the PVC tube and the hoppers that you build?
@UnknownCoatings
2 жыл бұрын
PVC length varies but about 3/4" from the bottom. Best zinc primer or?
@emilhestbech2603
2 жыл бұрын
When are you coming back?
@robertgregory1191
2 жыл бұрын
Are you available to answer questions
@UnknownCoatings
2 жыл бұрын
ukcarmy at gmail is the move
@frsr416
2 жыл бұрын
Do you need to seam seal if there welded under neath
@UnknownCoatings
2 жыл бұрын
I recommend it, but traditionally you dont need to, wheel companies still do it though
@timharsch5896
2 жыл бұрын
I'm in off Ohio and I have been looking for a powder coating shop that can color match my wheels to my car I have a Chrysler 300 Jazz blue and from what I'm being told by multiple shops that it's difficult to match that color. Is that true do you know of a product that can match the Mopar Jazz blue
@UnknownCoatings
2 жыл бұрын
Doesnt look like a tough match honestly. All Powder Paints may have a match
@timharsch5896
2 жыл бұрын
@@UnknownCoatings thank you for replying; I did find that prismatic has a jazz blue. Would it be considered rude or impossible for me to bring in the powder I want them to use or isn't that what they do as a business. They only use their products.?
@UnknownCoatings
2 жыл бұрын
@@timharsch5896 I would verify it's the same color. Not just the same name. Then I would ask your local.coater how is best to proceed with getting the color in their hands
@timharsch5896
2 жыл бұрын
@@UnknownCoatings thank you for the advice. Also I really enjoy watching your videos , you are truly a master of your craft. can't wait to see more.my only wish is you were my local shop
@bmwm3747
2 жыл бұрын
Anyone know if it's okay to remove the center spokes on a 3 piece wheel without removing the tire if I let the air out?
Пікірлер: 48