Inspection can be reset by following steps below: 1. Car off 2. Hazard lights on 3. Press brake 4. Hold down “0.0/SET” button 5. Start ignition while holding button 6. Press “OK” when prompted
@FLJAMESFL
4 жыл бұрын
Your awesome, thanks for the info.
@peace-nw7ik
4 жыл бұрын
Thank you very much. It helps a lot.
@bombosti8187
4 жыл бұрын
Thanks man I just did it worked great 👍
@TheLeahmarie
4 жыл бұрын
Thank you so much ! I’ve had this car for 2 years and still wondering that haha.
@fermypoo
4 жыл бұрын
Do you keep holding the brake after you start ignition
@roman.la.
3 жыл бұрын
You can reset inspection by turning on the flashers and doing the same procedure as before.
@stadianation5831
3 жыл бұрын
Can confirm
@jennm3286
3 жыл бұрын
Worked like a charm! Thank you!!!
@whodatjt
2 жыл бұрын
Yap worked for me too!
@BradBauter
3 жыл бұрын
This video is half correct. You as a driver/owner can reset without any tools. Read below. 1. Car off 2. Hazard lights on 3. Foot on breaks 4. Press and HOLD odometer reset button 0.0/Set button 5. While holding reset start the car 6. Car should ask if you want to reset inspection notice, click OK on stealing wheel 7. Revel that you don’t need to have this tool that was just told you needed and that this guy bought just for this!
@dustinalexander9678
4 жыл бұрын
Can confirm, inspection can be reset on the 2017 by turning the hazard flashers on
@diegoflores5441
2 жыл бұрын
Can confirm too
@diegoflores5441
2 жыл бұрын
No need off a scan tool
@absolutedynamite4979
Жыл бұрын
Unfortunately on a 2017 TSI Passat it did not.
@SourRaccoon
4 жыл бұрын
The inspection light is the exact same prossess as the oil light but you have to have your hazard lights on while you do it
@ewarnerusa
11 ай бұрын
My 2015 Passat TDI just flashed an oil change now light. I have performed the steps here, which are also repeated in the owner's manual, but it does not clear the warning. Very frustrating. It appears that it is going to work, I get same menu options shown. But the oil change now alert persists. Any ideas? Thank you.
@mrlrob3102
4 жыл бұрын
Man your instructions worked like charm, Thanks!
@JesseStick-ul2wm
Жыл бұрын
You can do it yourself. Same process just turn hazards on to do the inspection light
@Em_Dotyo215
Жыл бұрын
To reset the Inspection light just shut the car off hit the 4ways tun the key while pushing the buttin
@disneygirl4247
Жыл бұрын
Half right - reset the service indicator by turning on flashers, then press trip meter then turn car on. You will get a menu to reset
@intorainbowzOG
3 жыл бұрын
Ok that worked for me on the oil. Dang thanks!
@Alexjones_225
4 жыл бұрын
Or you do the oil reset procedure with the hazards on and it’ll clear just like the oil light did.
@vostok1100
4 жыл бұрын
It worked. Thanks a lot
@OfficialKV24
4 жыл бұрын
Pls I want to ask what does it mean as it is showing up on my Volkswagen Passat 2014. Inspection in 20days. Does it means my car due for service in 20days or I can just reset myself I don’t av to take it to mechanic just just reset it myself. Thanks..
@bradleyb7337
Жыл бұрын
Actually you can reset inspection without a scan tool
@elijah6090
4 жыл бұрын
What if it’s push start
@thebravoconnection946
4 жыл бұрын
On push button, press the start button 2 times till all cluster lights light up, do not step on brake pedal.
@TiMmMAAaaa
4 жыл бұрын
Turn on hazards and do same procedure to reset inspection light for 2016
@venuskarter8135
2 жыл бұрын
what do i do if i reset it and it still says i need an oil change?
@thebravoconnection946
2 жыл бұрын
You probably have the inspection service light on too, do the same procedure but before doing that press the emergency hazard lights button so the lights are flashing and then do the reset procedure again and it should reset.
Пікірлер: 48