▶️Link to This Scanner amzn.to/2BZYqWo ▶️▶️▶️Video about recommend Full Color Scanner kzitem.info/news/bejne/0qZ-y4p9gZFnqHY ▶️(GOOD)Great little scan tool under $25 amzn.to/2fv8gtK ▶️Better 2019 amzn.to/2Xpwp6d ▶️BEST 2019 amzn.to/2UbBTzr
@1057walrus
Жыл бұрын
Thank you for the quick video and link to the scanner! Very helpful.
@RANDOMFIX
Жыл бұрын
Thank you for your feedback, much apprecated!
@bisharobins2097
6 жыл бұрын
awesome, thanks for the recommendation and savings.
@RANDOMFIX
6 жыл бұрын
Anytime, Cheers
@jaimepearson4074
Жыл бұрын
Thank you this worked for me 😅 thanks for not going to fast in the video
@RANDOMFIX
Жыл бұрын
Thank you for the feedback!
@marrelladams689
3 жыл бұрын
Thanks....that scanner is a must buy!!! My wife's 328i 2011 328i has a high beam fault and gas cap fault?
@RANDOMFIX
3 жыл бұрын
This obd2 reader is too basic, you need something like this. kzitem.info/news/bejne/mHyLsouvoKh5nqQ
@jamespha9896
5 жыл бұрын
The check engine light will appear back ON soon if you don't fix the issue ( other then it is faulty code )
@RANDOMFIX
Жыл бұрын
thank you for the feedback!
@lboggieslim407
9 ай бұрын
Thank you
@RANDOMFIX
9 ай бұрын
Glad to help
@dubbman33rw
4 жыл бұрын
Im looking to get that scanner, quick ? I need my CEL cleared for emissions, will the scanner do that? Im dealing with a seal leak or valve cover gasket leak. Its causing my 328i to idle low and make a loud continous whistle but..... I add rear main sealer and it runs fine and the engine line eventually goes off but. I need to clear it for emissions and it's in need of more sealer.
@RANDOMFIX
4 жыл бұрын
Clearing the check engine light will does not mean you will pass a smog test. You will have to clear the code and also complete a drive cycle without the check engine turning back on.
@dubbman33rw
4 жыл бұрын
@@RANDOMFIX Gotcha, thank you for the rapid reply I appreciate it 👍🏼
@RANDOMFIX
4 жыл бұрын
My pleasure, check out my omelets smog playlist that covers the drive cycle.
@dubbman33rw
4 жыл бұрын
@@RANDOMFIX will do 👍🏼
@dubbman33rw
3 жыл бұрын
Hello, I have a 2011 328i how do I know which code reads for the check engine light?
@barryratliff-n7v
Жыл бұрын
my engine and battery were replaced, my check engine light came on it was for the MAF, I replaced it but the light is still on, what do I do?
@RANDOMFIX
Жыл бұрын
Did you reset the check engine light after your replaced the parts?
@spitgame2707
5 жыл бұрын
Beat tool ever bro wow
@RANDOMFIX
Жыл бұрын
thank you for the feedback!
@shavvycarta751
Жыл бұрын
How would you manually reset the service engine soon light?
@RANDOMFIX
Жыл бұрын
One the newer bmw vehicle that not really possible without a obd2 reader or scan tool.
@VirgilDavis
2 жыл бұрын
Should this work with a bmw 528i 2008 model? I received the scanner you recommended today, but when I plugged it in, the scanner read no codes stored. Also, it wouldn't allow me to erase any codes, but my check engine light is still on. Any suggestions, should I return the scanner?
@RANDOMFIX
2 жыл бұрын
This this works for the 2008 bmw e60. So your check engine light is on but you the obd2 reader sees no codes? Does it say the MIL (malfunction illumination light) light is on?
@VirgilDavis
2 жыл бұрын
@@RANDOMFIX No, when I scan it (if I am scanning correctly) it goes real fast and then the message no codes stored appears. I just received the scanner yesterday and have contact Amazon for a refund, but I really don't want to send it back if it's the correct scanner and I am just doing something incorrect. You run the scan without the engine running, right? Does it matter if the radio is on or should everything else be turned off. Thank you so much for your response.
@jhocel13sese
5 жыл бұрын
this is fit for my 2010 BMW X3?
@RANDOMFIX
5 жыл бұрын
Jhocel, Yes this will work for your 2010 BMW X3. _Randomfix
@erizzle67
4 ай бұрын
Ain’t working on my 2007 e93. Cylinder 3 misfire, swapped coils with #2 and the code followed, changed all the plugs and coils and it’s running great. Light will not go out, codes will not clear with the tool. Still showing 2 and 3 misfire stored in there. There’s no misfire though, running absolutely great!
@mannydelgado1770
Ай бұрын
Hello did you ever get that light out?? I have the same problem right now. I put new spark plugs and coils. And with my scanner the light will not go away. But the vehicle is running fine.🤷♂️
@erizzle67
Ай бұрын
@@mannydelgado1770 yes I meant to come back and post my fix. I have the OBDLink CX scan interface, and I was using the app that came with it. The engine light would just not go out driving for a week, obviously no issues, so I paid for the BimmerLink app. Firstly, the scan gave me more detail on the stored codes which would have been nice before, and I quite easily was able to turn off the light. I think it was $40 which is a bit stiff but I’m hoping it will pay for itself in the future…
@mannydelgado1770
Ай бұрын
@@erizzle67 thank you for the info.🙏
@willroden3326
5 жыл бұрын
If you erase the codes without fixing the problem, will the check engine light turn on again? (If it is faulty it won’t turn back on, I’m asking if it is not faulty)
@RANDOMFIX
5 жыл бұрын
I will the check engine will not turn back on if the problem is not detected again after your reset a check engine light. So if it not faulty it will not turn back on. _Randomfix
@tmastervlogs8340
2 жыл бұрын
Can you do this with all service codes?
@RANDOMFIX
2 жыл бұрын
Yes but after 2010 some codes can not be erased. Also, you should really fix the issue causing the issue, This will only access the basic codes and if you get a better oem specific scan tool you can view the bmw side of the codes for a better idea on the cause.
@Bmwtuner
Жыл бұрын
What issues did you fix
@RANDOMFIX
Жыл бұрын
I don’t recall specifically as this e60 has a slew of issues so I told my friend that I would fix all the issues as long as I make a video for each repair and $15 per hour and he had to pay for parts. He is a really good friend and the lesson I learned was never sell a friend a bmw as they will always complain. 😂
@fdor54
4 жыл бұрын
The one he recommended really works. Check engine light is gone 😃
@RANDOMFIX
4 жыл бұрын
Thank you for the great feedback. Much appreciated
@samoo8933
4 жыл бұрын
is this more comprehensive than autel pm200 ?
@RANDOMFIX
Жыл бұрын
Sorry for the late reply! did you find a solution?
@jamesliu3688
11 ай бұрын
Hi. Does it work on 2019 X3?
@RANDOMFIX
11 ай бұрын
Yes this works on your 2019 bmw x3
@jamesliu3688
11 ай бұрын
Thank you !
@jamesliu3688
11 ай бұрын
I checked it online. Does Al319 better MS309? Does Al319 turns off check engine light too?
@adamhope7464
4 жыл бұрын
My scanner connects but when searching it comes with a error and disconects
@RANDOMFIX
4 жыл бұрын
Try a different scanner + make sure you battery voltage is also over 11.5+ volts.if the other scanner has an issue as well then check the pins of the obd2 connector before you really have to start digging. Best of luck. Randomfix
@gregphillips4441
2 жыл бұрын
I have the same code reader and a bmw with the same light. Using your how to I was able to do as you directed! Thanks!
@RANDOMFIX
Жыл бұрын
Thank you for your feedback, much apprecated!
@afshinbaratian3213
Жыл бұрын
Can this device turn off engine light permanently?
@RANDOMFIX
Жыл бұрын
Nope 👎, these cars very complicated and the issue needs to fixed. If you remove the check engine light bulb it will detect that too and you won’t pass future smog tests.
@margaritacontreras3527
3 жыл бұрын
Awesome video. Very helpful, Thank you Randomfix.
@RANDOMFIX
3 жыл бұрын
Margarita, thank you so much for the great feedback.
@davidjimenez10
6 жыл бұрын
thanks , for the video its simple but help a lot.
@RANDOMFIX
6 жыл бұрын
David, Glad the video was helpful and yes I try to keep it simple, direct, and short.
@tomcat561999
5 жыл бұрын
Thank you for the help. Appreciated...
@RANDOMFIX
5 жыл бұрын
Tomcat561999 much appreciated and it's my pleasure to help!! _Randomfix
@tomcat561999
5 жыл бұрын
@@RANDOMFIX By any chance, would you know how to activate/programme the bluetooth facility in the Professional stereo for BMW 318i SE year 2009?
@RANDOMFIX
5 жыл бұрын
@@tomcat561999 you would need a speciality scantool. Did you buy the part used or new. I just did changed out amp on mini Cooper and part was over $1300 new and I grabbed the BMW part and on eBay. With the used amp I received it was plug and play and didn't need any sort of activation. _Randomfix
@tomcat561999
5 жыл бұрын
RANDOMFIX Hello, it came already in the car, but is not activated.i need a code to set it up or a procedure better said...I know is possible, I need to figure it out.....
@mrm3686
4 жыл бұрын
@@tomcat561999 Hey bro u need NCS expert programing kit and u need to look it up manually. And activate it.
@chrislandau1122
2 жыл бұрын
Will this work on a 2017 BMW X5?
@RANDOMFIX
2 жыл бұрын
Yes it will work on a any 1996 and newer bmw for basic OBD2 data.
@zurielsauceda
6 жыл бұрын
Will this work on a 2008 BMW X5?
@ZenoBeatz
6 жыл бұрын
yes
@RANDOMFIX
Жыл бұрын
Sorry for the late reply! did you find a solution?
Пікірлер: 75