All your vids are great bro. Thanks heaps. I like the stealth branding, simple and effective.
@russkisteel
6 жыл бұрын
Hi, A couple of questions. What model Paradox is this? I have 1758EX with 1686H keypad and need to change the codes - I presume I'll have to do the full hardware reset as I don't have installer/master codes. It is hardwired to AC without a switch so I guess I'll have to either pull the fuse or remove the wires from the transformer. Which way should I go? Thanks
@russkisteel
6 жыл бұрын
Ok never mind that question - just disconnected one of the AC wire, removed the battery, put the jumper, connected the AC wire again. Unfortunately, instead of a long beep confirming the reset, the siren started going off, then keypad started double-beeping with arm1 fast blinking. Any idea what I should do? Cheers
@robsondesouza2913
2 жыл бұрын
Whats the difference reseting pressing buton reset + AU, and reset with this jumper RESET?
@Slow_Games86
2 жыл бұрын
very nice
@norbi_5592
3 жыл бұрын
I have a 278+, and it doesn't work with the Reset Jumper help
@networkn
7 жыл бұрын
Hi. thanks for this video. In the process of setting the time on my Paradox Espirit 728+, I accidentally set the sensor in my garage to set the alarm off, regardless of whether the alarm is armed or not. We have had to cover the sensor with paper. I think that sensor is zone 2 (how could I check), and do you know how I could turn off this feature please? I think it may be called 24 hour mode, but I can't figure out what combination of keys to use to turn it off. I'd be most grateful for any assistance.
@golfwagen4173
7 жыл бұрын
No number can be lit at address 100 / do not count it exactly - only tamper zone must lit zone 2(maybe garage) set off
@networkn
7 жыл бұрын
Hi. Sorry you've lost me a little?
@siennamt
6 жыл бұрын
Hello, this is very helpful! Will it also work with Spectra 1759?
@golfwagen4173
6 жыл бұрын
maybe
@bradbehr5351
7 жыл бұрын
Could I use this technique if I lost/forgot all the access codes for a Spectra 1738?
@golfwagen4173
7 жыл бұрын
Yes, but this will erase all progam, then it will be necessary to re- program the system
@NashOrleans
6 жыл бұрын
What exactly is reset? The user codes? The master code? The installer code? If I reset do I need the installer code? I have none of the current codes and don't know if the installer code was changed from default.
@ikanishedrach6461
7 жыл бұрын
paradox mg 5000 do not have this jumper,what do I do to reset it?
@golfwagen4173
7 жыл бұрын
kzitem.info/news/bejne/raR60qRsqYmFlqQ
@murthasham4154
7 жыл бұрын
Hi ; Thank you for this excellent vidoe, Really appreciate it.. Question: I have this exact same panel, and I want to reset it.. But when I disconnect AC and DC power, my key pad goes blank.. How come your's is still on? How did you power it.
@golfwagen4173
7 жыл бұрын
The panel can also be locked against reset by installer
@michaelbloom7502
5 жыл бұрын
It's impossible that the keypad is still functioning after removing both AC and DC. You are mistaken. Good luck
@dirtbagsdeclutter6741
6 жыл бұрын
Having trouble resetting my master code for my spectra 1689 16 zone led keypad. Are you able to assist ? I have followed your steps but when it comes to "arm ". I do not have that on my keypad. Thanks
Пікірлер: 20