The door not unlocking is a symptom of another issue the machine is telling you that it needs repair. Could be a water level control or control board issue. The water level control tells the control board that the water is at the proper level for operation and also had been drained from the washer tub before the control board stops sending power to the lock mechanism. I often find that the water level hose is plugged with soap and needs rinsed out but I have found also found in many cases it is a partial blockage in the drain pump or drain hose befor or after the drain pump causing a slower than normal draining cycle. I would clean the trap/ lint filter check the pump for obstructions and use a shop vac to clear the drain hose.
@everydaypawel9193
2 жыл бұрын
Great insight! We'll look into that. The problem started recently. I thought it had to do with me moving the machine several times this week as I was had to move it out to work around it and move it back to do laundry. Thanks for watching and the insight!
@bettypelton7711
Жыл бұрын
Thanks for KZitem. My daughter’s washer locked up on me and I didn’t know what to do. 😅. Thanks to this video I got it running
@everydaypawel9193
Жыл бұрын
Glad I could help! Check drainage for a potential clog, hair, gunk and stuff.. Door lock may be a symptom of something else going wrong. we only had that door lock, or wash cycle not finished, issue several times and then went way and hasn't come back since making that video.
@ronhernandez3629
8 ай бұрын
Excellent! It worked! Thank you. 👏🏽👏🏽
@everydaypawel9193
8 ай бұрын
You're welcome!
@valerievalerie5897
4 ай бұрын
I watched 7 videos because my knob wouldn’t turn on settings and woulnt turn on to tumble. It would say it’s drying. All videos involved getting inside and replacing stuff I have no ability to do. My machine is Maytag Neptune but nothing like yours including no reset button but I sorta did what you did and darned if it’s not working! Thank you! Now I can go on that trip to Belize or Tahiti
@everydaypawel9193
4 ай бұрын
good luck!
@liaswathen
8 ай бұрын
Wow! You saved me soooooo much time! Thank you 😊
@everydaypawel9193
8 ай бұрын
You're welcome!
@TheWholeKitAndCaboodle
Жыл бұрын
Thank you for saving my butt.
@everydaypawel9193
Жыл бұрын
I will tell my wife. She has many fans, glad to hear it works for others.
@karamjitsingh9306
Жыл бұрын
Thank you so much. For help today
@everydaypawel9193
Жыл бұрын
You are so welcome!
@jorgeehernandez3713
Жыл бұрын
Thanks!!!! 🎉🎉🎉🎉🎉🎉
@everydaypawel9193
Жыл бұрын
Welcome. Make sure all the internal drains are clean and clear.!
@guadalupedelcarmengonzalez7323
Жыл бұрын
Muchas gracias me ayudó el vídeo
@everydaypawel9193
Жыл бұрын
Denada.
@brandonnelson5021
2 ай бұрын
Now it’s ready to break again in five minutes 😂😂😂😂
@everydaypawel9193
Ай бұрын
@@brandonnelson5021 perhaps. We have not had issues for a while.
@sylvieplante1835
Жыл бұрын
Merci pour cette video
@everydaypawel9193
Жыл бұрын
je vous en prie
@HenryJ-mr9ok
3 ай бұрын
It still doesn't come on after that tutorial
@everydaypawel9193
3 ай бұрын
We were just sharing, this is not our area of expertise.
@iirobot99
3 ай бұрын
what to do, if if the error code is E09, blinks to F01? Would this help to reset the washer?
@everydaypawel9193
3 ай бұрын
I have no idea! Up up down down left right left right A B Start.
@melanieromans1453
2 ай бұрын
What model is this machine?
@everydaypawel9193
2 ай бұрын
Maytag model maxima xl steam maytag
@cf8361
Жыл бұрын
Cause she’s wrong thats entering a system test the powering off before it tests anything if you want clear it’s memory you do what she did with the 123 123 133 then hold the 3rd key for 5 seconds then you can block soil level and power off or click play and it will do a diagnostic check
@everydaypawel9193
Жыл бұрын
you seem to have some expertise on the subject.!
@nathangendlephoto
Жыл бұрын
This isn’t a “reset”, you’re entering diagnostics, starting automatic test mode, then shutting it off before it starts. This shouldn’t help anyone…
@everydaypawel9193
Жыл бұрын
"reset" might be the wrong word, but it has helped others who have had their machine locked out and unable to start them.
@precilliamartinez7753
Жыл бұрын
Mine not wanting to wash I did what you did reset and it won’t turn on 😢
@everydaypawel9193
Жыл бұрын
Sorry. others have mentioned sometimes the system will shut off because drain is clogged internally and not let it turn on, and electrical reset is not the solution. good luck.
@cejaygambill5052
8 ай бұрын
That's not resetting it, you just told it to run a diagnostic cycle then canceled it
@everydaypawel9193
8 ай бұрын
run a diagnostic cycle then canceled it... Anything that allows the door to open and run the machine. If you know the correct action, please share. seems like many others in the comments experience similar problem.
@joannevilchis3529
Жыл бұрын
I did that and it worked for only 1 wash then stopped working😊
@everydaypawel9193
Жыл бұрын
I'm glad it worked for you. Other comments informed this is a symptom of something else wrong and could be clogged drainage within the machine. It is a temporary solution... and something else needs to be addressed. Thanks for watching!
@leelanae
Жыл бұрын
Mine lights up then turns off 😢 any suggestions any one?
@everydaypawel9193
Жыл бұрын
Assuming you've tried the unplug, replug option. Someone in the comments section said the electronics turning off are symptom of another problem like clogged drain lines inside the machine. Clean all the drains... The machine may be smart and turning it self off to prevent another problem, like water all over your floor, or water damage inside the machine. I really have no idea. A repair person may be your best bet. I am very handy but used a repair person for my dishwasher and refrigerator. Yes, I paid like $250 for a $50 part, but my 2 thousand dollar appliances are working correctly. Good luck!
@rachellecarrizales166
5 ай бұрын
It worked my starting working as soon as I reset it.. 2 days of unplugging, plugging it back on but would be right back to error code Thanks
@nothingofuse
Жыл бұрын
im about to shoot my fucking washing machine i did this exact stuff and still wont open
@everydaypawel9193
Жыл бұрын
HaHa!!! shot it! That would make a GREAT youtube video! I've told other people I was informed that electronic issue may be due to clogged internal drain lines thus the machine won't start up so you can't run another cycle so you blow things up internally and don't flood your house.
Пікірлер: 44