Resetting Dahua IP Camera and Dahua NVR
#cctv #security #cctvcamera #surveillance #cctvsecurity #surveillance #security #dahuatechnolgy
1. Locate the reset button on the camera. This is usually a small hole that can be pressed with a paperclip or similar tool.
2. Use a paperclip to press and hold the reset button for about 10 seconds.
3. Release the reset button and wait for the camera to reboot. The camera should now be reset to its default settings.
To reset a Dahua NVR, you can follow these steps:
1. Locate the reset button on the NVR. This is usually a small hole that can be pressed with a paperclip or similar tool.
2. Use a paperclip to press and hold the reset button for about 10 seconds.
3. Release the reset button and wait for the NVR to reboot. The NVR should now be reset to its default settings.
It's important to note that resetting a Dahua IP camera or NVR will erase all the settings and configurations, so you will need to set them up again after the reset. Also, make sure to consult the user manual for your specific model for detailed instructions on how to reset the device.
#cctv #security #cctvcamera #surveillance #cctvsecurity #surveillance #security #dahuatechnolgy
Негізгі бет How to Resetting Dahua IP Camera and Dahua NVR?
Пікірлер: 25