It's people like you that give us the ideas and urge to do things. Keep it up.
@stevenholland6681
6 жыл бұрын
Great job guy's
@DarrenWS6
6 жыл бұрын
Very good job. Lots of folks have no idea why one gets darker lol.
@Risingmist01
6 жыл бұрын
Good job gents, did you guys put on any type of UV protection?
@scottjohnsoltis7748
2 жыл бұрын
Next video, how to get algae out of a swimming pool!!
@ikaros21
4 жыл бұрын
Perfect.Im using this as a guide to fix mines at this very minute lol
@edgarpalmas6244
11 ай бұрын
Awsome work! Good Job
@TurboShotIncredible
6 жыл бұрын
We are really stoked with how great these came out! What do you guys think?
@mezzyshredder
10 ай бұрын
What type if glue did you use? Afyer 5 yesrs, gors the glue hold? Looking to purchase same glue/adhesive if it holds up. Thanks.
@T0m0zuki
3 жыл бұрын
Very useful! :) Thank you both!
@bradbowen4295
2 жыл бұрын
Nice work
@LeaveNoTrashBehind
4 жыл бұрын
Awesome thanks, just got these for $100 for the set. Gonna do exactly this and get new bulbs. Well besides taking it apart, unless I have to.
@chris13435
3 жыл бұрын
Awesome video. Could you make one on how you fixed the crack you made. I have a similar situation
@mezzyshredder
6 ай бұрын
What type of adhesive did you use?
@bradlybaldwin9564
2 жыл бұрын
Very informative
@maxjones9139
6 жыл бұрын
Looks good guys! Keep it up!
@MFP2241
4 жыл бұрын
Nice... but don't you actually start with 500 grit, then 1000 for finishing?
@PrismEMP
10 ай бұрын
what glue did you use?
@D-mob5563
Жыл бұрын
Turned out awesome, just curious, what spray paint did you use after the primer ? Thank you 😊
@OhYeaMista
5 ай бұрын
Does the chrome spray paint really get rid of the blacked out look and make them shine red again? Hard to tell from the vid.
@antonioalaniz4069
28 күн бұрын
Theres another video i watched and theres a big difference before and after, im assuming the more chrome you get it the brighter they will be
@darwinmorales5495
Жыл бұрын
Tanks for u help good video 👍
@shawnpoullard6997
3 жыл бұрын
Are you guys near Houston?
@donaldmcwilliams4951
3 жыл бұрын
Nice guys
@gabrieltremblay7093
6 жыл бұрын
Thanks for showing us all how not to restore them this way! This video gives me an anxiety attack. I would love a follow up to this video in a year or so when condensation forms back inside and the paint flakes.
@gagt3400
3 жыл бұрын
For real 😂
@charleshendrix1081
2 жыл бұрын
Eh so what. You’ll have to buy new ones eventually
@kfx7004
5 жыл бұрын
Really appreciate how to restore the lights, thanks! I only skipped thru parts of this video because I can't stand it when someone makes a video and playing background music when someone's talking.
@gtamantube
8 ай бұрын
thats a nightmare to separate those tail lights
@TheGzillaman
5 жыл бұрын
Thank you guys for the video i need to do this to my 2000 Firebird, also need a trunk lid with raised spoiler if anyone here has one for sale please. 👍 BTW, what kind of glue did you use to seal the tail lights back and are they now water proof?
@shawnpoullard6997
3 жыл бұрын
I have a question about a cam install??
@andrewss190
6 жыл бұрын
good job fellas
@TurboShotIncredible
6 жыл бұрын
Thanks!
@cesarholguin1408
2 жыл бұрын
Hi guys, greetings from Mexico.....thanks for sharing....have you guys seeing the inner-tailights of a T-bird from the 90's? Mine it's a 93, and there's no new parts of those down here in Mexico, so I'm gonna give it a try on them, but I'm afraid of crack the plastic up, because of the wear caused by the desert sunlight very common down here in my hometown. Any special tips before I start? Any help would be much appreciated and God Bless you all.
@TurboShotIncredible
2 жыл бұрын
Thanks man! Best of luck to you on your taillight quest! We don't have any experience with a T bird. Im sure you can find plenty of info around the web though!
@Zelaznogsiul-63
4 жыл бұрын
I saw another video before yours, and the guy put the taillight housing in the oven at 200 degrees after that he used a plastic prying tool a metal spatula and so on.he had an easier time taking it apart than you guys, hindsight is 20/20. Anyway great video.
@85typet
5 жыл бұрын
I’ve been wanting to do that to mines
@maxedwellseven6724
3 жыл бұрын
Just asking - could you have skipped a step by buying more powerful LED bulbs and NOT having to separate the outer and inner tail light parts just to spray it silver on the inside? Just do the sanding to clean up the outside? Or even just buff it with polishing liquid?
@nanogotsmano1285
2 жыл бұрын
There is usually water on the inside of the taillights. If he just buffed/polished the outside there would still be water on the inside and it does mess up the shiny part and his light would still be dim.
@bigdiesil75
5 жыл бұрын
Carful them tailights are gold. The checkered ones are 1100 bucks
@biroabbuilditrightonabudge776
4 жыл бұрын
What kind of glue did you use
@erickliban2
6 жыл бұрын
How many HP does the sticker add?
@TurboShotIncredible
6 жыл бұрын
All of it.
@seabass3096
6 жыл бұрын
Where did you get the rear decals
@joelthompson6300
6 жыл бұрын
Fire Chicken Sticker :D
@tysoncurrie7745
6 жыл бұрын
This video should of been named how NOT to restore your taillights the right way, everything they did, they broke something or mest up somehow.
@chickennugget3232
5 жыл бұрын
looked better before they f ed them up....
@ELWS6
Жыл бұрын
Other then chipping that one piece off I didn’t see anything damaged regarding the tail lights.
@rickmisterx
5 жыл бұрын
Update on how these turned out?
@charleshendrix1081
2 жыл бұрын
Putting them in the oven is more efficient
@JoseMedina-hs9st
Жыл бұрын
Yup, my reverse light is losing the Chrome.
@gagt3400
3 жыл бұрын
OMG that pool 🙄
@valeriepickens2533
Жыл бұрын
I would have more criticism, but at the least, you're not racist. So yes, you earned a pass.
@chrissullivan1756
6 жыл бұрын
Great job but u need to trow that buffer away
@camaro318
6 жыл бұрын
What's the best glue to use
@TurboShotIncredible
6 жыл бұрын
We used a 2-part epoxy, similar to what was on there from the factory.
@iskenderkaymakli1748
2 жыл бұрын
Türkçe ceviriyide ekle
@superchile9640
3 жыл бұрын
Need to apply clear coat paint and the lens will last forever.
@macheton565
5 жыл бұрын
I just broke the same piece
@m3talc0re
4 жыл бұрын
There's so much wrong in this video, I don't know here to start...
@deadgenesis5188
4 жыл бұрын
You broke a piece of the taillight and still posted this saying this is how it's supposed to be done?
@silviasanchezduran6232
5 жыл бұрын
Para pulirlas no era necesario despegarlas buey .che menso,es mas hasta montadas se pueden pulir..
Пікірлер: 65