Thanks to World of Warships: Legends for sponsoring this video! Check out the game for free on Xbox and PS: wowsl.co/47XqklH Bonus Code: MODDEDWARFARE
@10__folds__cold
11 ай бұрын
The Goat 💯
@Zhaxxy
11 ай бұрын
no
@muhammadalihusnainnawab2331
11 ай бұрын
hi, brother so when will we get the ps 4 10.50 jailbreak without all of this difficult stuff
@10__folds__cold
11 ай бұрын
@@muhammadalihusnainnawab2331 not anytime soon
@WhiteModding420
11 ай бұрын
however I have a question if I am in 5.05 that I create a dump then that I pass in 9.00 that I also create a dump to finally put the last version can I go back to all the previous versions save on my pc or only the inactive version
@jasonjean7022
10 ай бұрын
Just realized we can tip. Big thanks to modded warfare for everything he has done!
@DavidJohnShewsbury
9 ай бұрын
How to do that?
@r4r3st
9 ай бұрын
@@DavidJohnShewsburyik im late but im not sure how to on web but on mobile its the bottom right in the comment section
@MODDEDWARFARE
9 ай бұрын
Thanks for the generous donation!
@antbobtyler2381
8 ай бұрын
@MODDEDWARFARE is there a way to do this from firmware 11.00 to 9.00 ?? 🤔🤔🤔
@mohiudd33n
8 ай бұрын
17:16
@rodak_
11 ай бұрын
I literally was just watching videos about FW downgrade options and was considering the teensy board option. Got back to subscribed section and this video got uploaded like 5min ago. What a timing.
@AlecBreen
11 ай бұрын
Insane amount of work you put in to this video.
@DaiconV24
11 ай бұрын
Great tutorial. I love the part where you kept saying "2 dumps" and "Comparing both dumps". Classic.
@dylanmoore4737
11 күн бұрын
😂
@bigbank7350
11 ай бұрын
The animation for the points is a lovely touch. Another amazing video tutorial thank you for going in depth everytime.
@Blue-Scorpion
11 ай бұрын
So much tech and knowledge behind this. I'm amazed. Well done!
@Luigi_Dirbtuve
11 ай бұрын
Confirmed. Today I downgraded my ps4 from 9.3 to 9.0. But there are two nuances. 1. In order for syscon to remain in debugging mode, you need to unlock that function additionally. 2. In order for the console to start, I had to completely remove teensy 2++. Only then did the console begin to show signs of life. BIG THANKS FOR THIS GUIDE.👍👍👍👍
@justinbarrett836
10 ай бұрын
My teensy 2++ does not show up on my pc
@justinbarrett836
10 ай бұрын
How did you configure the teensy2.0++? I just bought mine and it doesn't show up on my pc , I installed every single driver for it.
@Luigi_Dirbtuve
10 ай бұрын
@@justinbarrett836 Watch this guide 26:09Maybe because it is empty? You need a program and upload a hex file to it. One to program syscon and other to program NOR
@nijamkaj
10 ай бұрын
So it's possible if ps4 was before on 9.0 and not if 9.0 was skipped?
@Luigi_Dirbtuve
10 ай бұрын
@@nijamkajNo. This method restores to the previous version. Which was on the console.
@user-hj2zt9ri6t
11 ай бұрын
Been waiting for this tutorial. Thanks a lot. 🎉
@josephcepi5510
11 ай бұрын
Fantastic work-around for the broken pin. Top points for MacGuyver-ing your way out of that predicament. Thanks, Modded Warfare, for yet another fully detailed tutorial. I have a 9.03 console which I am about to take apart to check if the chips are compatible for the Teensy++ revert.
@sergiopedro1980
9 ай бұрын
Did it work?
@josephcepi5510
9 ай бұрын
@@sergiopedro1980 Yes. It is shown in the video.
@josephcepi5510
9 ай бұрын
@@sergiopedro1980 Modded warfare doesn't post fake information. If there is anything claimed on this channel, you can rest assured that it has been thoroughly researched and tested.
@bpw
8 ай бұрын
@@josephcepi5510 I think he was asking if your attempt at the revert worked
@josephcepi5510
8 ай бұрын
@@bpw Yes, sorry. I checked my console internals to make sure that the console is compatible (which it is) but have not been able to acquire a Teensy++. This is a "rainy day" project that hasn't happened yet. I am 99.99% certain that if MW posts information, you can bank on it being true and accurate.
@kannadu56
9 ай бұрын
It's finally ok for me 9.04 > 9.00!!! I followed step by step and everything works perfectly :D the motherboard of my ps4 pro is an NVG I had to adapt some soldering points, and it is impossible for me to connect in debug mode if I remove the pin wire 15. So I had to keep it soldered to write to the syscon. Then to restart the console I had to unsolder all the wires. Fortunately it worked the first time by making choice 3 (FF FF FF FF....) Many thanks again I can finally re-use my PS4 pro in 9.00!
@cajaritohh2606
9 ай бұрын
Yo seguí el tutorial paso a paso y no he podido leer el syscon siempre me sale error de comunicación. He probado los puntos tradicionales y los alternativos y el resultado es el mismo
@kannadu56
9 ай бұрын
@@cajaritohh2606what's the model of your motherboard ?
@michellepanco3038
8 ай бұрын
How much money do you spend to revert your version?
@kannadu56
8 ай бұрын
around $25, the price of the teensy and some components to prepare it@@michellepanco3038
@vilaar9015
6 ай бұрын
Hello! I have an nvg-004 and the nor chip has a different layout, could you explain how you adapted those points? Do you have any diagram? Thanks in advance!
@Stoner42000
11 ай бұрын
Bro youre always coming out with these work arounds thank you
@JrManPT
11 ай бұрын
I was waiting for a guide like this to revert a ps4 pro. Thanks!!!
@BiraruScripts
11 ай бұрын
i dont even have a ps4 now but still watch these videos 😃
@josephcabrera7521
2 ай бұрын
In case it helps anyone, I did the following: I extracted the copy of the SYSCON without any regulator soldered to the Teensy and also disconnected all the flex cables, only leaving the power supply, fan and hard drive connected, so I read the SYSCON, then soldered the regulators and extracted the NOR and then wrote the NOR then unsoldered the regulators and write the SYSCON, I know it is a lot of work but it was the only way to make it work
@ruivo_rv
2 ай бұрын
você também teve o erro na hora de ler a syscon?
@josephcabrera7521
2 ай бұрын
@@ruivo_rv Sim também, mas ao deixar a placa sem nenhum regulador praticamente como ela vem de fábrica não tive problemas para ler e escrever o SYSCON. Alimentei-o com os 5v da placa. Por outro lado, para ler o NOR se soldar os reguladores que diz o vídeo. Foi um trabalho extra porque tive que soldar e dessoldar, mas era a única maneira de fazer funcionar.
@diymind3146
Ай бұрын
other way to lift the pin safely : 1) add flux 2) pass a thin copper wire (I dit it with a 0.1 mm wire) under the Leg 3) heat an pull gently
@DrCryogenic
10 ай бұрын
Hey everyone, I have an update about syscon and spi reading. Even though A00-COL2 is compatible, not all syscons are patchable in fact. I just verified this 2 other boards. It had the correct version for revert compatibility but in the ps4 wee tools it's mentioned not patchable. As for the spi read, the spi wiring of NVA boards do not hold good for NVB-003 but hold good for NVB-001 boards. Update: The wiring scheme is the same. The problem is with the SPIway script. It does not recognize SPANSION NOR chips. Only winbond works.
@albertdavis1882
10 ай бұрын
Good info. Mine says probably patchable. But both nor options 3&4 both come back as 9.03 Wondering if I overwrote the old slot when I reinstalled 9.03 before doing this. 😢 Currently running all slot switching options but no luck. Always 9.03
@DrCryogenic
10 ай бұрын
@albertdavis1882 You can still try with general options and extras if need be. The revert part is mainly achieved with nor and not syscon. That's why you first flash the nor chip and then the syscon chip. Do try with those options too.
@albertdavis1882
10 ай бұрын
@@DrCryogenictried all of them. My error message doesn’t say the same thing his does. Mine says :Main(3728)getmanufacturerinfmode
@user-fn7nk6hs6j
7 ай бұрын
Hello, did you or someone else succeeded to dump SPANSION NOR? My PS4 pro 9.03 has been lying around disassembled for two months waiting for a solution to the problem 😂. Someone commented on my previous comment that he successfully dump this chip but didn't share how he did it. Thanks
@DrCryogenic
7 ай бұрын
@user-fn7nk6hs6j you could directly wire it to your SPIway or modify the script to identify the NOR chip with device ID. In my case, it was on firmware 7.02 so I used ftp to backup the nor and then replaced it with a readable nor from a donor board.
@DungarooTV
11 ай бұрын
The reality is this will not be for 70% of most people given the complexity of hardware removal and soldering@
@daniel070487
Ай бұрын
this gives me major flashbacks to PS3 teensy flashing times...oh gosh the many wires that needed to be soldered.........
@jed2055
2 ай бұрын
Massive amount of work there John. I appreciate your work and the many hours you would have to have spent getting this up. I don't know how you made time to do any dumps. Truly an electronic data stream genius at work here 🙂
@Oneoftoomany
11 ай бұрын
I didn't think this was possible I'm kind of surprised not going to lie
@user-hj2zt9ri6t
11 ай бұрын
Maybe that's cause you don't follow the modding scene. Paid Firmware revert has been there for 6 months or more now. These free tools started showing up almost 2 months or so and people have been using it. But yes, this is the first video tutorial it seems, maybe MW wanted to try it a couple of times to be sure.
@KingStr0ng
10 ай бұрын
@@user-hj2zt9ri6tYou expect him to know that after only 6 months? Are you serious? As if its not normal to be surprised by such a big change.
@user-hj2zt9ri6t
10 ай бұрын
@@KingStr0ng those who mod always follow the scene dude. 6 months is a considerable time. Ofcourse those who are not interested in mods will never ever know. Like for instance ps5 can play most of the ps4 dumps now. But ofcourse those who have no interest will not know.
@KingStr0ng
10 ай бұрын
@@user-hj2zt9ri6t"Those who mod always follow the scene" > No, most people don't live for whether or not they can mod their PS4. They have things to do. It's been awhile since anything was available for newer firmwares. Plus this is a tutorial to teach people that don't know, as I said.
@valerioodorisio
9 ай бұрын
@@user-hj2zt9ri6twhere can i find them?
@dmanmovie50
11 ай бұрын
I'm so glad that I didn't update to latest firmware I accidentally downloaded 9.03 trying to jailbreak my ps4 now it sound like I have a chance and don't have to buy a new system
@killahb33
11 ай бұрын
YAY It's here!! Thank you so much! Have been impatiently waiting for this and so happy it's here!
@goldenrich3878
11 ай бұрын
NO
@hoangdo2511
3 ай бұрын
My PS4 was updated to 11.50 5 days ago and today we have full tutorial for the jailbreak 11.0 :) So I think I need to wait some years for a new guide :(((((
@Experthno
2 ай бұрын
Help us
@fronek4946
7 күн бұрын
just do this revert mod
@wubbalubbadubdub588
3 күн бұрын
@@fronek4946 u want them to perform this intricate task? With no prior experience? good one mate
@iDntUseModz
11 ай бұрын
best feature for the ps4 modding love the work from the hard working devs bringing us GODLY software❤
@shivathakurssss
3 ай бұрын
After soldering it doent starts 🎉
@user-mn6oy5kj7x
3 ай бұрын
I had to desolder all wires from Teensy before I could boot.
@K3taP4n
Ай бұрын
😂
@kennylender7252
Ай бұрын
Sounds like you didn't wire the switch correctly or you didn't put the switch in the correct combination it won't boot with the teensy attached that's one of the main reasons for the 3 dip switch
@ItsBertoooGaming
Ай бұрын
Lmao 😂😂😂
@aax8152
15 күн бұрын
Pour water in the usb and hdmi port then if that doesn’t work out it in ice
@retrobros9684
11 ай бұрын
I'm hoping to see all these things go further. I am amazed. Amazed at what JB 4 can do!
@markiesparky
11 ай бұрын
So glad I'm already on 9.00. I wouldn't go anywhere near my PS4 with a soldering iron!
@diacomservice
9 ай бұрын
Thanks for the video. The most important thing here is the a and b slot logic. So the previous backup version is very important. Because the backup logic of PS4 offers us this choice.
@pspguydgo
11 ай бұрын
Very complete tutorial, thank you very much for sharing.
@PuReXtremeGaming
11 ай бұрын
Last night I found my silver Batman PS4 I bought a few months ago thinking about how much better it would be if I could JB it instead of regular black one, then this video dropped lol
@megabaneen8057
8 ай бұрын
THANKS. this dude knows his stuff.. Thanks for all you do for the PS4 scene. Your time is much appreciated.. What I did is checked out my firmware on the PS4 noticed that it was 7.55 and then I made a direct clone of my one terabyte HDD to a 1terabyte Crucial mx SSD using a machine called wavelink (no computer necessary). Then I took the cloned SSD and put it into my PS4. Worked like a charm. Now I have An HDD back up of firmware 7.55 so for anything goes wrong with my SSD I can just re copy. Pain in the butt at least I have a copy. The wave link machine can be purchased off of Amazon and it's the easiest way to make a one to one clone using no computer.
@TheCroupier74
6 ай бұрын
Cloning the HDD won’t help you get back to your previous firmware if it gets updated.
@tomclancy3096
3 ай бұрын
Si se actualiza la PS4 , si le metes El disco duro donde 7.55 te dira inicializar la PS4
@krzysyek
3 ай бұрын
@@tomclancy3096 I don't understand you. If you put old PS4 drive into updated console, then what happerns?
@SkelloWellow-rj9su
2 ай бұрын
@@krzysyekps4 safemode
@jamjam.100
11 ай бұрын
Solid work mate, well done.
@al970h1
9 ай бұрын
Will this work on any firmware version. For example could I go from 11 to 9. Or it can only be reverted to the previous update os version?
@KyleGP
3 ай бұрын
It's worth mentioning that you should disconnect the optical drive and power supply cables when performing this. You'll find the PS4 syscon tools will likely freeze when trying to get into debug on the console if you have these connected.
@davemacdonald5106
Ай бұрын
wow, long process but definatley worth it. Great work as usual mate
@clivejones6712
11 ай бұрын
EXCELLENT MATE !! keep the tutorials coming
@kamenkonovic1366
11 ай бұрын
Hello! Excellent! I'll try this to work, I have both Teensy and USB to TTL, I'm just waiting for the MCP1825S-3302E and XC6206P302MR to arrive so I can modify Teensy and we go 🙂. I have several consoles that I know were previously under 9.00. I hope I'll succeed, it's complicated, but I used to do something similar with the PS3 before the NOR3 flasher appeared, or as it was called, when the FAT PS3 was downgraded.
@rilwanfayas8284
10 ай бұрын
Is it worked for u?
@kamenkonovic1366
10 ай бұрын
Hello! I haven't tried it yet, I'm waiting for some components to arrive, and I can't get there from work. Realistically there is a lot of work involved, so I don't even know how much I would charge someone for such a service, it's more profitable for me to fix a console, laptop or whatever, than to mess with this, but I'll definitely try it for myself and see if will make it...
@stevesetsfire
7 ай бұрын
I soldered in a couple of e3 linkers during the ps3 days but no way I am gonna try this.
@HooniganG4m3R
3 ай бұрын
I apreciate you very much man ! Amazing work , i would never try to do it. I am great at any type of welding but i cannot solder for the life of me. Keep up the good work , it was a very interesting video to watch.
@lrdsouza1017
11 ай бұрын
Thank you so much. Been looking for the newest tutorial. Going to do it to my 9.03 this week!!
@justinbarrett836
11 ай бұрын
Did you manage to do it?
@TheGremulin
10 ай бұрын
rip ps4
@6layeronit
9 ай бұрын
@@TheGremulin🤣🤣🤣🤣
@deathgun9652
11 ай бұрын
Good tutorial keep doing the good work 👍👍👍 Even though this tutorial is to hard for me
@ffsafghasdsa2292
3 ай бұрын
if i update from 11.0 directly to 11.50 so 11.02 was never installed can i revert to 11.0 ???
@user-mn6oy5kj7x
3 ай бұрын
Yes
@iTzLoSnHTx
11 ай бұрын
29:05 after you remove the wire you do put the pin back in hole
@MODDEDWARFARE
11 ай бұрын
You put the pin back down onto the pad. As it was before you lifted it.
@iTzLoSnHTx
11 ай бұрын
@@MODDEDWARFARE thx just wanted to make sure
@jin3513
11 ай бұрын
@@MODDEDWARFARE hello mate I hope u doing well l, so I was wondering, can I could Play online PS4 with the Jailbreak 9.00, or there gonna be a problem.
11 ай бұрын
Thank you for the very detailed instructions! If somebody is able to solder a couple of wires to the MB, it's now possible to backup the chips! 👍
@tateranus4365
4 ай бұрын
sadly I am unable to because I have a medical condition that makes it impossible for me to solder anything remotely precisely, like I can barely work on RC planes despite the fact that I was taught by my dad who had been doing that kind of shit for longer than I have been alive...
@OldAncientGuy
11 ай бұрын
Can you make a video where you combine your old revert video with the new one it would make the revert method easier .instead of reverting back, you will update from 9 to the current version 11, then do the revert. You can use the jailbreak to dumb the s flash from nor I just believe you can make an easier method by combining the 2 video of yours.
@EmilePolka
11 ай бұрын
I wish that you actually prioritized dumping the NOR Flash first to check if it can be reverted to jailbreakable firmware or not. most console technicians actually do the dumping the nor flash first before proceeding with the rest of the stuff.
@TheCroupier74
6 ай бұрын
Good advice
@pesokpesok
5 ай бұрын
Thank you for this clear and concise instructions!
@anoueer
11 ай бұрын
never clicked so fast
@2Fast4u__
4 ай бұрын
wouldnt it be easier to write a 5.00 firware to downgrade ?
@daniellindstrom5951
4 ай бұрын
You cant
@daniellindstrom5951
3 ай бұрын
You would have a backup of syscon and some other chip when your ps4 was on 5.00 and it is different on every console
@ibapreppie
11 ай бұрын
What a time to be alive!
@blackdanifilth
11 ай бұрын
Thanks for all the effort. That is not easy but gives hope that some day we'll get it.
@mihaimiu5817
11 ай бұрын
Thank you for this tutorial, time and effort that you put into this subject
@jackfavvv0280
11 ай бұрын
So thankful, you can't even type out a genuine thanks without copy n pasting over the same comment again and again.
@Kakarot803
11 ай бұрын
This bot thirsty for likes 🤣
@moneydrop584
11 ай бұрын
I hope they will make an easy way to revert ps4 firmware back to 9.00 soon.
@RedZebraa
11 ай бұрын
Avec une simple clé usb 😂👍
@marnacos6908
11 ай бұрын
@@RedZebraahow do you do it?
@AymericKing69
11 ай бұрын
@@marnacos6908the patience is the key BUT but given that we still have no news of post 9.00 jailbreaks since 2 years, it is possible that these versions will never see the light of day in the medium term max
@BiDMhM
11 ай бұрын
@@RedZebraa how ? please help me
@Zhaxxy
11 ай бұрын
@@BiDMhMhes probably talking about the 9.00 exploit not a revert
@X1ZR
11 ай бұрын
Sick bro, thinking of buying a PS4 soon. EDIT: It will not be doing this after all😭
@moraddidou4823
11 ай бұрын
I've break one of my testing ps4 slim motherboards , any way 😂 im learning, thanks , wanting for another simple way to do revert more simply 🤗🤗
@peko_the-dude
11 ай бұрын
Thank you man , I appreciate your work ❤
@Doyle69
11 ай бұрын
Does the voltage mod need to be done also on the Teensy 4.0?
@musiclibrary5440
11 ай бұрын
As I understand,if the 4.0 has a voltage below 3V than no you don't need to But if it still has 5V or 3.5V you need As he said it's not about the teensy it's about the PS4 itself If you put too much voltage than It might turn on more Chips beside the one we need
@Mooseguy15
6 ай бұрын
@@musiclibrary5440I wish there was more on how to use the 4.0 and 4.1 with the ps4, the 2.0++ are becoming harder and harder to get within an acceptable time frame, don’t really wanna wait a month and a half to get one from China lmao
@batdido5803
11 ай бұрын
Hi, MW ! Nice video. Just to ask in 45 min you say that you goin' to flash patched Syscon .bin again. Which .bin file you mean?
@ahmedelnaggar4300
7 ай бұрын
Great work ! I got the required stuff and ready to run over , i’m on 9.03 but a bit hesitated , do you advise me to wait ? If 9.03 JB is coming soon !
@AhmedAli-gd5sl
11 ай бұрын
Got 2 pros with 9.03, gonna try this....
@JaclkMurphy
11 ай бұрын
Let know me, I have one too
@oscarloria
11 ай бұрын
Same!
@aadityab1203
11 ай бұрын
Great work! But this method is much complicated I don’t think everyone can do this😕 unlike jailbreak
@teamafot3001
8 ай бұрын
Hi i have a ps4 white light problem and need advice. So i traded a faulty xbox one original for a supposed faulty ps4 original from a person that fixes consoles that wanted the Xbox for spares. So on the day i got home with the ps4 i used my ps3 cables to power it on and it miraculously powered on which surprised me as the controller was connected properly using the usb cable. But i saw the screen flash black then back to the home screen which i didn't know what is was then it did it once more and was displaying perfectly. After about 5 mins of waiting for it too show some errors or switching off because i did not expect it to work i plugged in my usb speakers to the other usb port on the front while the controller was plugged in. That was when the screen went black instantly. I didn't know what happened and pressed the eject button and a copy of GTA 5 came out which means the console was still powered on. When i plug the controller and speakers in on my ps3 super slim at the same time is says too many devices drawing power something like that. So i think it drew too much power on the ps4 and caused a wlod on the ps4. Im trying to do a home repair with minimal tools and if you could give me some idea of what the usb ports could have shorted eg a transistor or fuses or something. It still powers on and everything but that was the defining factor i think that contributed to the white light of death. Any recommendations would help as ive watched a lot of KZitem videos and most are the ic chip or some transistor . Its a original ps4 with wlod
@hellogg4011
7 ай бұрын
just found my ps4 is compatible and I'm at 9.03 so I can revert gonna try this.
@KoolKatBeatz
11 ай бұрын
def beyond my skill level..
@yasserradwan4786
11 ай бұрын
عمل رائع تحياتي 👍
@monsterwwe5213
7 ай бұрын
هل عمل معك؟
@oscarloria
11 ай бұрын
OMG this is the BEST tutorial!!!
@Mafia2262
7 ай бұрын
Awesome work that's a lot of work😮, Thx man that helped me out, since the PS4 is not really up to date for Sony, that's a great opportunity to use MY ps4 as an allround Gamestation👍👍👍
@gumzy1985
8 ай бұрын
Incase of breaking the leg of the pin 15 why not use the method you used to fix it,don't bother lifting the leg in the first place...file away the top to expose the pin for the jumper...sometimes the way we fix things seemed to be the easiest solution in the first place my friend 👍
@takutanuva1000
8 ай бұрын
The purpose of lifting up pin 15 is to unbridge pin 15 & pin 16 on the motherboard, which is required in order to successfully perform the operation. If he simply filed away at the top just to expose the pin for the jumper, you would run into issues in reading/flashing the chip because you'd be basically bridging the voltage(VCC) with D4 on the Teensy.
@cuandothee1st
11 ай бұрын
I am there no other way to do this without any physical work, I don't understand that part😢
@HNedel
3 ай бұрын
Don’t know if anyone has mentioned this, but all the NOR chip lines have resistors on them, so thin wires can be soldered directly to those resistors, before the traces go through the vias on the other side. Did it like that on a PS4 Pro, only to find out the Spansion chip is not supported by the tools, only Winbond and Max 😢
@FreedumbHS
3 ай бұрын
if you use another spi programmer tool instead of norway/spiway, you can use flashrom which will definitely be able to read that chip
@VikasNarula
11 ай бұрын
Amazing work dude, nicely explained
@TonyAsh-rp6fp
11 ай бұрын
Wow. man you are the king of ps engineer. Excellent. Is it same process in ps4 pro ?
@moraddidou4823
11 ай бұрын
Thank you so much , we hope for a simp short way to do this
@jasonjean7022
10 ай бұрын
UPDATE: First time trying it I messed up the syscon chip, grabbed a new ps4 and was able to do it successfully. Haven't soldered in years but just bought everything and all new equipment to start tinkering again lol! This is the 1st project I'm doing on my old ps4. Permanent install on it!
@christophertiraallen4515
10 ай бұрын
good luck can you let us know how it goes
@jasonjean7022
10 ай бұрын
@christophertiraallen4515 yes will do, about a 3 week wait for the 2 regulators to come in for the teensy 3 volt mod, but once everything comes in, I'll come back and give my experience.
@albertdavis1882
10 ай бұрын
I got extras from my try. You pay shipping their yours
@jasonjean7022
10 ай бұрын
@albertdavis1882 everything has came in so far just waiting for the teensy right now. Got the wires soldered onto the nor chip as well as the d5 and d2 wires. Rn working on getting the pin off on the syscon chip and then the wire for the utx that way once teensy comes in I can just hook it up
@jasonjean7022
10 ай бұрын
@albertdavis1882 I used a set of magnifying glasses off Amazon, a decent soldering station, 60/40 rosin solder, and lots of flux, and patience
@fenix36131
11 ай бұрын
Awesome! thank for for the tutorial!
@0001CC
10 ай бұрын
This wild 50 min vid nice very good tutorial
@moraddidou4823
11 ай бұрын
More work bro ,this the bes tutorial for reverting ever 🌷
@maxdeen1298
3 ай бұрын
So you are telling me there's no hope but to open my PS4 guts
@maxdeen1298
3 ай бұрын
@@TurboBloxY I'm going to try the new jailbreak on 11.02 fuck PS4 if it gets banned
@maxdeen1298
22 күн бұрын
Well does it work
@gptsiteuser
8 ай бұрын
I wanna learn how to install this sort of stuff, as well as mod chip my switch lite. I have some old iPhones I’m thinking I can use to practice some soldering. I can tear apart a car, and I’ve built my own pc and fixed my own laptops. I’ve soldered wires in a car so now it’s time for me to finally learn this skill.
@TheDidi250
6 ай бұрын
Thank you very much for the full video. I would like to know, currently my PS4 FAT is in 5.05. I would like to know if I should first update it to do like the video, or if I should do differently. thanks again
@michaeljijus980
11 ай бұрын
Rock and roll!!!! Always!! You are the best teacher adviser and more. Greeting's from HAYWARDS HEATH ❤
@albertdavis1882
10 ай бұрын
For anyone stuck on pyserial step (Not showing up). make sure you install the 32 bit python 2.7.2 and not the 64 bit.
@mladic86
7 ай бұрын
I'm here not showing anything on putty
@albertdavis1882
7 ай бұрын
Check the baud rate and rx vs. tx lines. Might be crossed. I do it all the time
@mladic86
7 ай бұрын
@albertdavis1882 how do I check,do you mean between ttl and the motherboard?
@albertdavis1882
7 ай бұрын
@@mladic86 yes make sure that the TX an RX lines are going to the appropriate pads. If you think you have it hooked up correctly and it’s not showing anything when you power on. Try switching the RX to the TX and vice versa
@mladic86
7 ай бұрын
@@albertdavis1882 ok ,but first I'll try with pyton 32bit ,I think the connection is good because the cursor is moving just nothing you can't see text
@cajaritohh2606
9 ай бұрын
Dear excellent video, congratulations, could you please upload to a server, the connection points for the teensy and its different plates only appear in the video.
@shobitchouksey3442
11 ай бұрын
Nobody has those kind of equipment this is impossible to do for any regular people
@Jarge-s7o
Ай бұрын
In the diagrams there are wires for 5V and ground for the syscon but you don't wire anything to those pins in the video, do they need to be connected too?
@soloness
8 ай бұрын
Help! i tried 2 times to resolder the pin VDD on the chip but everytime i resolder it in the sysnand tool i CANT enter the chip into debug mode! i need every time to unsolder the pin and put a wire etc any idea?
@bbones
10 ай бұрын
What’s the price you end up spending on the requirements, with no knowledge on soldering wouldn’t it just be better to buy a new ps4 with the firmware
@neckashi6919
2 ай бұрын
could this be done with the regular teensy 2.0 by curiosity ? thanks!
@Atopsxv
7 ай бұрын
you shouldnt keep ur ps4 like facing up u should have it flat due to cooling (REALLY GOOD VID)
@DecibelAlex
8 ай бұрын
I just bought a ps4 that's on 9.03. fingers crossed it has 9.0.. thank you for the tutorial
@TheCroupier74
6 ай бұрын
It will be 9.00 or lower as there is no firmware between 9.00 and 9.03 👍🏼
@medecine4all513
2 ай бұрын
@@TheCroupier74what if the console was formated ?will it still be revertable
@TheCroupier74
2 ай бұрын
@@medecine4all513 if you reinstall FW 9.03 a second time then no. Both slots will be 9.03.
@DiceRollX19
9 ай бұрын
DLCs even installed, they are not recognized by the game, until they find a work around to enable them.
@HarjyotR
8 ай бұрын
@MODDEDWARFARE A few questions while I wait for my Teensy 2.0++. I have a ps4 on firmware 5.55 and was wondering if during the backup of 5.55 I could then manually update to 9.00 then make a back up of 9.00 then update to latest firmware so I can play with my mates (using 3 different SSD's for each version) is this possible? And can I switch between these firmwares? I am looking forward to your reply and anyone else who is willing to help me
@cajaritohh2606
9 ай бұрын
Hello dear, I did the entire tutorial identically as you show it, except that it is not permanent, I have the same board, when reading the syscon, it tells me Error Connecting To PS4 Syscon Tool, I already checked, continuity and voltage.
@RudyZanutta
7 ай бұрын
Check If the B4 wire is shorting to ground. In my case 2,87Vdc was not powering the syscon, so i connected the 3.3vdc of teensy directly to vdd and worked fine
@sexybob5552
11 ай бұрын
I have a question I bought my PS4 at 9.03 firmware and the previous owner factory reset the ps4 can I still revert to the previous version because I think the previous version isn't saved up
@lontongbalapondomohen
11 ай бұрын
Yes
@sexybob5552
11 ай бұрын
@@lontongbalapondomohenreally even tho it was factory reset at 9.03
@lontongbalapondomohen
11 ай бұрын
@@sexybob5552 yes of coursce
@gupse2190
11 ай бұрын
@MODDEDWARFARE Hello sir, I wish you a good day. There is a question I want to ask you. I want to download two of the same games to my 9.00 version device by changing the cusa codes, one as a patched game and the other as the original game. Have you done any work on this before? In short, can I change the cusa codes of a game?
@Meixiro
2 ай бұрын
Adoro vc modded warfare eu sempre acompanho seus vídeos abraço cara
@tarungupta2001
11 ай бұрын
Good soldering skills are required.Seems too difficult for me.
@makerls3619
10 сағат бұрын
Great job, thanks for the video. What hex file do you upload to Teensy 2++? Ghank you
@micheledelmoro5898
4 ай бұрын
if i reinstalled the same firmware in the console (i changed the hard drive), is it going to have the same firmware version in both syscon slots? or the older one is still there?
Пікірлер: 957