Love this channel explains clearly how your engine works and how to go about finding and fixing faults. Carry on the great work and thanks for all your time and effort in doing these videos. Andy Uk
@victorgomez6942
Жыл бұрын
Not even kidding, but I was just thinking about this a week ago and you came out with this video. Perfect timing. Thank you once again!
@YouWrench
Жыл бұрын
Excellent, that is good timing!! Hope your rotation goes nice and smoothly! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZitem channel. 3) Please Like our video's on KZitem (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
@dominiquev3476
Жыл бұрын
super explanation!
@lesliemj2079
Жыл бұрын
I was just wanting to do this not long ago because I also want to see if there is something loose under the front part of my car where the front tiers are it sounds like a rattle/or wobble like something is loose what could that be? Would love to hear your thoughts help!! I'm a single women/mother and I fix my own car issues to save money if I can and your videos are very very helpful I am very handy as well so that makes it easier. Thank you for all of your videos!!!!
@YouWrench
Жыл бұрын
Glad you are enjoying the video's! Your rattle could be any number of different things. If it's a general rattle check the engine undertray and surround covers that connect into the wheel arches etc. Just give everything a bit of a wobble by hand, it should be relatively easy to find that way. Best of luck! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZitem channel. 3) Please Like our video's on KZitem (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
@uowcagarazhy4754
Жыл бұрын
A huge thumb up for yet another great video. Keep it up! I am a big fan of your channel, and after watching the great content you upload, I became a DIY mechanic of my Dodge GC. Now, I have a question about this car: here in Europe there is quite a few of them on the roads. As you can imagine, most of them (if not all) were imported from US or Canada after being bought on Copart or IAAI auctions. This means they were damaged at some point in the past, as any other scenario would not be economically beneficial to the European user. Now, I have seen quite a lot of DGS and ChrysT&C's here without an engine undertray / shield. Mine came also from US without this engine undertray. Is it on purpose, or did it get lost in the accident? Do DGC's and Chrysler T&C's in America have this undertray? I do not know whether I should look for one in the aftermarket (or a non-genuine one), or is it better to leave it like that. On the one hand, winter is harsh here and in snowy conditions road authorities throw salt on the roads, on the other hand I heard people say that 62TE transmission is underdimensioned for this vehicle and heats up, and actually it would really need an additional radiator, so you'd better leave it without a tray at least for the summer, so as not to boil the ATF+4 ...Thanks in advance for any insight!
@YouWrench
Жыл бұрын
Thank you for your support and glad you are finding our video's helpful! Yes, the engine undertray's do indeed exist, but many are removed along the way (not an exclusive thing for Dodge/Chysler - many garages seem to remove and not refit them for some reason!!) I'd recommend leaving them on, especially here in Canada (and it sounds like where you are located also) where there's a lot of cold weather and the roads are salted. The oil and transmission pans get very grotty quicly when exposed to all that salt!! Best of luck! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZitem channel. 3) Please Like our video's on KZitem (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
@uowcagarazhy4754
Жыл бұрын
@@YouWrench thx a lot!
@argylemcgoogin3298
Жыл бұрын
FWD: Crossover or X: What method is recommended, or should you alternate them each time?
@YouWrench
Жыл бұрын
For Front Wheel Drive the two common options (as in the video) are the Forward Cross or the X-Pattern. You can use either at your own preference. It's nice to have an option to choose between, and when you inspect your tires it may point you towards using one over the other. For example, if you find the two tires on one side of the car are wearing a little faster than the two tires on the opposite side, then the X-Pattern would be good as this swaps the sides, whereas Forward Cross swaps sides only for the rear wheels. So, you can use either and make the decision when you inspect your tires, and if the wear is pretty even on all four corners then use whichever you prefer. Hope that helps! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench 2) Please ensure you subscribe to our KZitem channel. 3) Please Like our video's on KZitem (by clicking Like!) 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!
@katamarans
Жыл бұрын
What is the torque spec for that dodge grand caravan?
Пікірлер: 15