Did anyone else notice the little chipmunk peeking out under the house at 4:44? Great video!
@daganhaddad
2 ай бұрын
one trick I saw on another vid showed using regular garden hose as a protector for the cable to go through wall w/some tape - worked nice
@kelstr
9 ай бұрын
While I do like how clean your install is... I much prefer to put the cable in metal conduit to reduce the chance of someone cutting the wire, accidentally or intentionally.
@TOPDadAlpha
Ай бұрын
Great idea. Thanks
@daganhaddad
3 ай бұрын
never realized a kit existed - besides the drill bbit - gromets & snaking tool would have been nice included in original kit
@StarlinkHardware
Жыл бұрын
You have to use the connector on the dish side, the one that is straight.
@livingproof9622
11 ай бұрын
He did.
@FatalForecast
6 ай бұрын
I can’t believe I just paid $600 for starlink and this kit didn’t come with it
@stephenlosongco6201
5 ай бұрын
Would’ve been nice to have it as a complete kit but hey the corporate mindset is maximize the Bottom Line … 😅
@johnjoyce2794
4 ай бұрын
would have been nice to have bolts to attach to roof too but another optional extra. Hearing rowt does my head in too!
@jessicalapachin6310
9 ай бұрын
Thank you for this step by step video, very helpful and less daunting for us! Bravo!
@MadparkWorld
6 ай бұрын
Oh guys, it's Colby!! ❤
@rb8049
6 ай бұрын
For safety, you should have a lightning arrestor with grounding per NEC code. The ground connection before entry to the house is a requirement.
@StarlinkHardware
6 ай бұрын
I did with my Gen 1, since it had Standard RJ45 connectors. Using a lightening arrestor with the Gen 2 cable and proprietary connectors is not possible without serious modification to the cable, which also voids the warranty on the cable, and potentially the dish itself. I agree any antenna on your roof should be grounded, but with Starlink, it's simply not practical, and therefore extremely rare for installs to be properly done to code.
@ze_german2921
10 ай бұрын
The the Starlink just a CAT6 wire with a proprietary connector? Because I have cat6 running through the house and splicing into it would be my best option. If not can this be spliced?
@AnalogueSolutions
11 ай бұрын
this kit is on the UK store page. But that kit won't work with 99% of UK homes which are nearly all brick
@kobirelf97
7 ай бұрын
They have a kit for brick as well
@mermaid1717
4 ай бұрын
@kobirelf97 you have to have a different kit for brick houses? Shit! I just got my standard Starlink. Do I seriously have to buy a add-on now. This is why there should be installers for this.
@hiyahDotNet
5 ай бұрын
I followed this step by step, very helpful, thanks!
@StarlinkHardware
5 ай бұрын
Glad it helped!
@nozomisaika900
Жыл бұрын
I personally would like to use electrical pvc conduit pipes instead. Even though i fancy Starlink masonry routing kits, it's not advisable for me to leave wires in the open like that. I already had many CAT 5 cables chewed by rats, not small ones but those big ugly ones that are over 10 inches big. Hated those critters so much!
@Hobo636
11 ай бұрын
What size conduit is required?
@Wolfe3150
9 ай бұрын
I ran my wires in PVC conduit for that exact reason and haven't had any issues.
@kryciselement460
17 күн бұрын
This was helpful sir, thank you
@marcussanders7557
8 ай бұрын
Thanks for the video! Looks pretty easy! Only problem is that houses in most countries here in Europe are made of brick or concrete and stone. Unfortunately, the kits provided are not compatible, at least from what I see. Today is day one for our Starlink set but I have yet to figure out how I route the cable to the spot in the house where I need it. Do you have experience with the longer cables available in the shop? Is there a drop in speed when a longer cable is used? Thanks 🙏🏽
@lancersharpe
7 ай бұрын
Could you go through the uPVC of a patio door?
@marcussanders7557
7 ай бұрын
Unfortunately no. The doors are made of wood and have an aluminum cover on the outside. I would hate to ruin it. But I solved the problem by placing everything in the garage, where I could easily drill a whole.
@mermaid1717
4 ай бұрын
US houses are brick too. And yet no one on KZitem making these videos show installation with a brick wall. I'm screwed.
@marcussanders7557
4 ай бұрын
@@mermaid1717 I know that there are also brick houses. I just wanted to point out, that there are no easy solutions for them. However I can say that I found a way to enter the house with the cable and it works, despite the longest version of the cable. I'm sure you would find a solution too, maybe not one without extra effort or additional cost...Happy to help if you need it
@2A-Jake
9 ай бұрын
Am I the only one that found the drill going through the wall funny? 4:40
@BrooksStyle
8 ай бұрын
😄
@currentliveoccupant
8 ай бұрын
I found it odd he drilled the outside hole in reverse.
@AllynVibes
3 ай бұрын
So for a network wire I get a 1. long bit big enough for the connector to fit thru easily. 2. Buy to grommets to fit and cover 3. Wire management 4. Caulk to seal
@Tony-8280
Жыл бұрын
Well done. I hope I will manage as well. Because I'm really not a techie. Unfortunately.
@sent4dc
2 ай бұрын
What's the diameter of that whole that you made? I will need to drill it thru a masonry wall.
@tyajacobs
10 күн бұрын
3/4"
@HORRUS29
Жыл бұрын
I don't like the fact that you have to use their proprietary cable. I just had a house built and wired for cable and internet. But we live in the country and there is no internet service available. I had wished that I could just connect this to the wires that were ran when we built the house.
@mrzorg8378
Жыл бұрын
I'm not drilling a random big hole in my wall with knowing what's behind it. Fray some electrical wires and your insurance won't cover after it burns down. All over a crappy Elon device.
@MarkRobertson1
Жыл бұрын
Exactly. Never use anything other than a concrete drill bit as the other type of bits will sever electrical cables behind the wall when you hit them. A concrete bit will grab the wire and wrap it instead so you ate less likely to get a shock or cut your power
@WINGNUT
11 ай бұрын
you can cut their cable and re-terminate it to be regular ethernet connectors. you will just need to do it on both ends to be able connect back to their modem
@JoeAroner-SIWAYTV
10 ай бұрын
That have an either net adapter so you can still use your existing cat5/6 wires on your home.
@ze_german2921
10 ай бұрын
@@mrzorg8378 use a Stud finder
@user-om8xw9zx5h
Жыл бұрын
does thia come with the normal order or i have to order this ket separately??
@foordya
Жыл бұрын
Why silicon inside? Hopefully the outside is sealed to prevent water from penetrating to interior wall.
@StarlinkHardware
Жыл бұрын
To hold the grommet into the wall and prevent it from coming out with cable movement, and also as an air seal. You're right, exterior is where the water prevention happens, the inside seal is more about air and to "glue" the grommet to the wall.
@dondodomik6337
Жыл бұрын
@@StarlinkHardwarehow about brickwalls?
@ChrisDca
Жыл бұрын
@@dondodomik6337 Starlink sells a masonry routing kit on their website.
@aim.1
9 ай бұрын
So helpful! Thank you!
@COMMIEFORNIARELOADED
2 ай бұрын
$26 is stiff for $5 worth of bits from ACE Hardware...Honestly, for the $600 it costs for the Gen 3, it should come with a wall mount and install kit. SpaceX is acting like they're hurting for money, and an extra $70 for a mount and $26 for install kit is robbery.
@TimMoynihan-qs1xx
8 ай бұрын
Hi, can I run about 100’ of Starlink cable from dish to router? And is 100’ cable even available?
@disciple777
5 ай бұрын
Hi, do you know if the drill bit can go through , cinder block, concrete and stucco? did you ever figure out the size of the drill bit?
@StarlinkHardware
5 ай бұрын
They have a masonry routing kit for that: shop.starlink.com/products/us-consumer-masonry-routing-kit-gen2 The drill bit is 1/4 for the pilot hole.
@mr2981
9 ай бұрын
I don't think it would be any more difficult to just cut off the proprietary connector and convert to CAT6, which makes everything else easier.
@bitemehard8209
11 ай бұрын
Helpful to see what’s in the wall kit. Don’t mean to nitpick but its not “Orientate”, Its simply orient.
@ozjado
10 ай бұрын
Her in Australia most of the houses have brick/concrete exterior walls so kinds useless for us
@colton8786
8 ай бұрын
What is the size and length of that drill bit they send in that kit?
@currentliveoccupant
8 ай бұрын
Pro tip- clockwise on the drill bit will save you some time.
@erinbrown9897
8 ай бұрын
He drilled clockwise. What am I missing?
@notakai9681
3 ай бұрын
what should i do when all the walls are made out of stone?
@terisprague9469
7 ай бұрын
Can the cable be routed through existing electrical boxes?
@StarlinkHardware
7 ай бұрын
I wouldn’t recommend routing it along side AC power cable because of potential interference. But you can run conduit and boxes for the cable.
@nopants3560
6 ай бұрын
Try doing this on a UK home , that isn't made of paper machee. Bricks , Insulation , more Bricks , concrete etc.
@StarlinkHardware
6 ай бұрын
No problem, they have the "Masonry Routing Kit" just for that purpose, as mentioned in the video.
@shannoncrowell2193
7 ай бұрын
The video was helpful for installation however, my cable failed after about a month and now wondering if it’s possible to remove without cutting the cable and if I can remove sealed grommets and reuse the hole in the wall.
@StarlinkHardware
7 ай бұрын
Yes, I actually had to do this too. The grommets are easy to remove if you use a utility knife to cut the sealant first. Then they just pop out. You can replace the cable, add more sealant to at least the outside grommet before reinstalling.
@griffinpk1
12 күн бұрын
If you need silicone (to keep moisture out) on the interior then there is a problem
@AshleyBryant12
6 ай бұрын
I really need something like Starlink cause we don’t have internet service out where I live but I don’t understand why the router can’t be wireless so we don’t have to drill a hole in the house because my box needs to be at the back of the house which has no good entry for the router cable
@firekt66
6 ай бұрын
The router is wireless to whatever you’re connecting to it but the router has to be plugged into the satellite dish as does any router from the source that is supplying it……
@babyyoda2219
2 ай бұрын
Didnt show going up the wall and installing the dish on the roof?
@StarlinkHardware
2 ай бұрын
I have separate tutorials for the dish mounting, some of which include cable management. kzitem.info/door/PLxVQoKt_blX2XR-nLz3Xcg7V6Lr-56hhZ&si=Mi8QSGne50YN98mQ
@Cornpop-xh9wp
Ай бұрын
Is that a gen 2 dish plug in? I have a gen 3 and the plug is the same on both ends. And doesn’t look like yours
@StarlinkHardware
Ай бұрын
Correct, at the time of this video only Gen 2 existed. But the process would be the same for Gen 3, except it doesn't matter which end of the cable you run through because they are the same on both ends.
@user-zj7cw6dp8o
5 ай бұрын
I have ordered and received the StarLink unit with the exterior mount like yours. But the kit did not come with the kit that you showed in this video. No Grommets, no drill bits and threading tool. I went back into the StarLink site and tried to find that kit and I can't find it. Can anyone help me with where/how I can find this kit? Thank you in advance!
@StarlinkHardware
5 ай бұрын
The cable routing kit must be ordered separately. Here is the URL to the store page: shop.starlink.com/products/us-premium-cablerouting-kit-gen2-business
@kevinh5448
9 ай бұрын
Why did you silicone the inside wall? If water gets through the outside hole, the water is in the wall already. Sealing the inside seems silly. The rest of the video showing the cable seems pretty good.
@StarlinkHardware
9 ай бұрын
The silicone holds the grommet into the wall, even for the inside one. It’s in the installation instructions to seal both sides.
@DAGenao
Жыл бұрын
Great instructions. What is the maximum length of the cable that goes from the antenna to the router?
@ChrisDca
Жыл бұрын
150 ft.
@TheRepairRundown
11 ай бұрын
The ground base one is around 75ft
@brandonl9440
21 күн бұрын
Just get a damn fish tape silicon and a damn 1 inch drill bit
@pedrocerveca2579
2 ай бұрын
Colby, do the hole near a power point. The router needs power. Doh!
@DoZiDoz.
5 ай бұрын
Do does all this come in the kit? Or do you have to get the drill bits separately?
@StarlinkHardware
5 ай бұрын
The drill bits and other hardware you see come in the kit. You will just need the tools described in the supplies needed section, like the drill.
@beancoleman5903
Жыл бұрын
Can you use this same routing kit to go thru rv walls?
@zx1611
10 ай бұрын
this is my question or a mobile home?
@deere7227
8 ай бұрын
Son-in-law just got package. Outer end firmly factory attached to starlink receiver. Inside end one big honking 90 degree elbow. Going to be over 1" hole
@RippenSXS
Жыл бұрын
You run the cable to the dish and connect it, then fasten the cable to your house. Otherwise you have a bunch of cable hanging off your dish.
@user-nj4vz2mr7s
Жыл бұрын
If I buy starlink setup can I use in Afghanistan?
@cammaramcquilkin8118
10 ай бұрын
Do we need to order the longer cable if we are having to do outside installation?
@daddyrabbit835
10 ай бұрын
I did. The cable that came with it seems far too short. You are really limited by the original length.
@StarlinkHardware
10 ай бұрын
The included cable is only 50 feet long, so if the mounting location is far away, it is best to order the 75' or 150' cable in advance in case you need it. You can always return the longer cable if you don't need it.
@juanroaguilo
Ай бұрын
Thx!!!
@josephlawson1531
9 ай бұрын
My cable has a 90 degree turn on the plug for the router? Anyone have a suggestion for getting it through a wall?
@jnichos6920
8 ай бұрын
I believe the other end of the cable will lay flat, which is why he fed wire from inside out?
@josephlawson1531
8 ай бұрын
@@jnichos6920 I'll have to look. We went with the RV antenna because that was all that was available in our area. It came already plugged in on the antenna end, so I'm not sure if it comes out or not.
@jnichos6920
8 ай бұрын
@@josephlawson1531 yep, I seem to recall being confused as our unit arrived with cable attached to dish/antenna. At a glance it looked permanent, but our’s did come off. I can’t quite remember the release mechanism, but you’ll find it.
@yvetteschindler
Жыл бұрын
Is it safe to just coil the extra cable by the dish? The sun will not damage it?
@StarlinkHardware
Жыл бұрын
Yes, it will be fine in the sun.
@garywright8846
5 ай бұрын
What if you have a brick wall?
@StarlinkHardware
5 ай бұрын
They sell this same kit but in a "masonry" version. Same process, different bits for brick and concrete.
@luizs.pereira5417
4 ай бұрын
where can I order this intallation kit?
@StarlinkHardware
4 ай бұрын
From the Starlink shop at shop.starlink.com
@kubzy7884
10 ай бұрын
Link for the kit?
@nhgiftbaskets
10 ай бұрын
If the Router is fully waterproof why does it have to be inside?
@StarlinkHardware
10 ай бұрын
It's water resistant, but Starlink still says it is rated for indoor use only. Besides, you will want the router inside for a better Wifi signal. The more walls and objects the signal has to go through, the slower the connection will be.
@eileenperron6798
29 күн бұрын
Hi- can I use this kit if I have vinyl siding? Also, how will I run the cable on the ground from my house to an out building roof? Can it lay in the grass or do I have to worry about it getting wet?
@nativetexaslady937
6 ай бұрын
What do you use to drill the large hole through steel. (29 ga. )? Bardominium
@StarlinkHardware
5 ай бұрын
You could use a 3/4" hole saw bit.
@safeword_whiskey
11 ай бұрын
Do you live in a Tuff shed?
@FedorAntony
5 ай бұрын
It’s still crazy to me that Americans like to build their houses from wood instead of brick.
@StarlinkHardware
5 ай бұрын
It’s a cheap and versatile material, and was originally used here as a building material because of how plentiful it was when Europeans first settled. Throughout any area of the world, people build their houses out of the natural resources available. No different here in the US in that regard. We have a lot of wood, so we make use of it.
@AntonandSinan
4 ай бұрын
Same, watching this and thinking how we had to run ours close to the window frame (the only wooden part in the house) as there was no way we would be able to drill through the thick stone and cement walls that we have in our home in France 😂😂
@jonahkaiguam
2 ай бұрын
Here on Guam...all the homes are made using 8x8x16 blocks
@williamchibuzor3173
Ай бұрын
They don't have cement...
@AntonandSinan
4 ай бұрын
Yah won’t work in France. Homes here are either brick, stone or concrete.
@StarlinkHardware
4 ай бұрын
They sell a version for this called the Masonry Cable Routing Kit.
@giovafncreative
Жыл бұрын
My cable port has an L shape and it's complicated to do a hole that big
@StarlinkHardware
Жыл бұрын
That's the wrong end of the cable. You need to start with the dish side connector which is straight, and route it from inside to outside up to the dish.
@giovafncreative
Жыл бұрын
@@StarlinkHardware No way man, that's too late😭 Me and my dad did an HUGE hole into the Wall because we didn't think of that🤦 I know this for the next time, thanks!
@virusthewolf
11 ай бұрын
I looked at both before even watching this video and still it will require much larger hole than any other installation. This is flow in the design instead of ripping people off the cable should been crimped after installation.
@YakAttack145
Жыл бұрын
But you just left the glob of silicone on the floor that dropped at 9:55. Regardless..... great video.v
@andlostillgiven
10 ай бұрын
I was watching to see if he'd clean it up too 😂
@LIVEWIREMEDIAENT
9 ай бұрын
This must be the single most thing that I dislike about this system.... They should've made the ends as adapters and provide a cat7 cable with the kit . Smart device , dumb design.
@Chris-ot9jf
9 ай бұрын
Great value 😂 you can achieve the same result for $2
@UncleBobo
8 ай бұрын
This is 100% incorrect. The cable that came with my Starlink has a head that will not fit in a hole that is less than 2" in diameter.
@StarlinkHardware
8 ай бұрын
Use the other end, which isn’t angled, and only requires a 3/4” hole.
@UncleBobo
8 ай бұрын
The other end was already connected to the dish and it didn't look like there was a way to disconnect it.
@StarlinkHardware
8 ай бұрын
@@UncleBoboJust pull down, it’s detachable if you have the Gen 2 rectangular dish.
@UncleBobo
8 ай бұрын
Wish Starlink would include directions in the box. Also, the cable runs through a metal pipe that is also connected to the dish. I didn't know the pipe can be removed too,
@Palmiped09
Жыл бұрын
Assume kit is of no use with solid brick or stone walls
@StarlinkHardware
Жыл бұрын
Right, they have a separate kit meant for brick/concrete.
@DungleBell
9 ай бұрын
@@StarlinkHardwaredoes the drilling kit come with the order starlink? Or we have to order them separately?
@StoptheLie
8 ай бұрын
Opinions are like assholes, everyone has one!
@alesh2275
Жыл бұрын
Redheads are hot …..
@stevekremer5942
Жыл бұрын
Shaved
@jimlelan4906
11 ай бұрын
The end of the cable that plugs into the router is L shaped, and will require a significantly larger bit. Oh well.
@richbyrnes8137
11 ай бұрын
Which is why you use the end that goes into the dish. He does say that in the video.
@Nitemerican
11 ай бұрын
@@richbyrnes8137common sense ain’t common.
@stevecorcoran9869
Жыл бұрын
This was one of the most painful things I have watched in a long time. Someone take the power tools and silicone away from this guy before he hurts himself or glues his fingers together.
@Mark-wp4lw
10 ай бұрын
LOL...was hoping he snagged some Romex with the drill bit
@backwoodsreviews8391
Жыл бұрын
Dude this is such a sloppy job just you literally drilled a hole through the house 😂. Just make your connectors a normal internet connector. I’m so annoyed at starlink poe connector. I can’t have a clean install in my house that’s hidden without masterminding something no one has done.
@bch5513
11 ай бұрын
I'm pissed my connector cable Does NOT collapse like that! It is completely solid at a right angle. It takes a HUGE hole.
@richbyrnes8137
11 ай бұрын
You need to use the end that attaches to the dish instead
@speds3746
11 ай бұрын
Good grief. You people don't need the Internet. You can't even follow instructions, much less be responsible enough to 'surf the web'. 😂
@2A-Jake
9 ай бұрын
@@speds3746I'm dying 😂
@fyou4844
4 ай бұрын
Wtf- all i get is a 75ft cable in a box.
@AndrewNewmont69
9 ай бұрын
This cable are not well designed, you have to do a big hole to let the connector pass, and here in Italy all house are made of bricks or concrete. 😂
@itsdanielbruh4915
6 ай бұрын
you’re doing it wrong that’s why.
@JohnOsorio93
7 ай бұрын
50 euros in Ireland 🥲 I don't think it worth that money.
Пікірлер: 163