I plan on getting one for a better cured transfer… But iMO, I don’t think it saves much time, if you’re a solo designer. I also plan on getting the DESKTOP DTF… Can it load more than one sheet for printing? If it can, I can see it saving a few minutes, maybe making the workflow… flow. I’d like to see a demonstration of a multi workload, using this oven. I’d even the more like to see a multi level oven, maybe housing 5 sheets at a time. Is there one?
@AAPrintSupplyCo
2 жыл бұрын
Hey there! 100%, more consistent and better cured transfers. As far as speed, even as a 1 person operation the ability to cure your transfers while leaving your heat press available to continue applying transfers, pre press garments, etc will certainly save some time for anyone
@monchis719
5 ай бұрын
Mine came with a metal piece and a set of wires with caps. I figured the metal was a hinge but I haven’t figured out out what the wires are for?
@AAPrintSupplyCo
5 ай бұрын
Hey there! Let's get you in touch with tech support, here is the link to connect: aaprintsupplyco.com/pages/contact-us please provide photos of the items in questions so we may assist as quick as possible
@LovesBranding
2 жыл бұрын
Curing from bottom up is a game changer. Quicker & more even curing 👍
@AAPrintSupplyCo
2 жыл бұрын
Couldn't agree more, we love these ovens!
@Liz_Sews_n_Stuff
Жыл бұрын
I’ve had this curing oven for a couple months now and I’ve been getting very uneven results- parts of my prints are crying perfectly and other areas are not curing at all….have any suggestions? I’m using the recommended settings and have also tried adjusting both time and temp, but nothing seems to resolve the issue…any recommendations would be greatly appreciated!!
@AAPrintSupplyCo
Жыл бұрын
Hey there - first off we should try closing the upper vent opening a little more. Not quite shut so the steam/vapor from the cure can still escape but more closed should improve results. If issues still persist we would advise contacting our tech department for troubleshooting with your unit: aaprintsupplyco.com/pages/contact-us
@Liz_Sews_n_Stuff
Жыл бұрын
Thanks, I’ll try that and see if it helps!!
@AAPrintSupplyCo
Жыл бұрын
@@Liz_Sews_n_Stuff Sounds good!
@velasquezjoel12
Жыл бұрын
How do I change the display to degrees Fahrenheit?
@AAPrintSupplyCo
Жыл бұрын
Here is a step by step video: kzitem.info/news/bejne/soGgl5WAg3Nqp5g
@marthingarcia7930
Жыл бұрын
They are good at advertising and making videos, but they are lousy at making shipments to their clients. I have been waiting for my DTF printer for 2 months and it has not arrived.
@AAPrintSupplyCo
Жыл бұрын
Hello, at this time we are projecting a current 5 week lead time for this printer on the item listing. We would like to look into this further and see if there has been any delay in processing, here is our contact form to connect with a support representative: aaprintsupplyco.com/pages/contact-us
@clezzyschannel3677
Жыл бұрын
Mine keeps burning the images to the heat platten, can you advise please. Really could use the help
@AAPrintSupplyCo
Жыл бұрын
Hello, here is the contact form to reach technical support: aaprintsupplyco.com/pages/contact-us there is an upload section to include photos of the issue for best assistance!
@TamiT3
Жыл бұрын
Mine is on the way!! Can't wait!
@AAPrintSupplyCo
Жыл бұрын
Congratulations and happy New Year!
@wallymeyer5111
Жыл бұрын
I can't get my phoenix A3-2 to cure my prints
@AAPrintSupplyCo
Жыл бұрын
Hello, sorry to hear we are not getting the desired results with the machine but we are here to help. Here is the link to connect with our support team: aaprintsupplyco.com/pages/contact-us
@GSDVIDZ
Жыл бұрын
Is curing from the top or bottom better? Thanks!
@AAPrintSupplyCo
Жыл бұрын
Hello, performance wise I would not say there is a quality difference in the final product. It usually comes down to whether the slide out drawer motion of film loading or opening top cover motion is preferred
@U13-u9c
2 жыл бұрын
Is it hot when you open it?
@AAPrintSupplyCo
Жыл бұрын
Hey there! The temperature converts to over 250 F and heat is required to cure the powder to the wet ink so we do advise caution when operating the over.
@clezzyschannel3677
Жыл бұрын
@@AAPrintSupplyCo What is the recommended temp in F
@AAPrintSupplyCo
Жыл бұрын
Hi! We recommend starting settings of 260 F for 120 seconds and adjust time wise from there either up or down
@clezzyschannel3677
Жыл бұрын
@@AAPrintSupplyCo thank you. So when placing in oven. Should powdered side be facing up in the oven or down in the oven
@AAPrintSupplyCo
Жыл бұрын
You are very welcome. Always place the film powder up in the oven so that it cures properly for use
Пікірлер: 32