I notices the P16 monitor routing was post fader not prefader like the rest of the P16 routing. Is that correct?
@AllamHouse
5 ай бұрын
Good eye. That just happened to be how this customer had it set and I hadn't gone into this setup prior to the video. Usually I would set everything as Pre-fader.
@boallmon324
5 ай бұрын
Can you show more of doing your videos using the digital board instead on the computer. Lots of us don’t have laptops. I like to see this stuff doing it on the x32 board its self.
@AllamHouse
5 ай бұрын
Check my channel as most of my content is actually on the full size console. This video I decided to do both computer and board for this situation. Let me know if you have something specific you are looking to learn and I can point you in the right direction towards other videos.
@88omarz
5 ай бұрын
Very good stuff. The external mic but you touched on. Does that need to be routed to talk back in some way to have that working? Felt like that was touched but not entirely. Thanks again for the continued assistance
@AllamHouse
5 ай бұрын
There is a built in talkback mic on the consoles with faders that is located on the bottom corner of the screen. This will work natively with no extra settings required. If you plug a mic into the back of the console in the talkback mic input, you will need to go into the talkback settings and click to highlight the option for "EXT Mic".
@chadlynch5313
5 ай бұрын
Thanks for this video.. How's does talkback work if you have the musicians using a mic as well to communicate to the sound booth. Do I hear them though my headset . What routing is required?.
@AllamHouse
5 ай бұрын
Two things to consider in this situation. (1) This type of setup is considered a Music Director (MD) mic and you would setup a regular mic that is removed from the Main Stereo BUS. This gets it into the console and not in your house mix. Any musicians could add this to their IEMs as desired… (2) Once it’s in the console you would have to have the channel solid into headphones or have a BUS with some mix plus that mic that you can solo. The challenge is you would have to wear headphones most of the time since you don’t know when they might try to communicate with you… unless you come up with hand signals or something else.
@chadlynch5313
5 ай бұрын
@@AllamHouse thank you for your feedback. i attempted this. works generally.( the mic is routed to the IEMs ok via bus mix) however the problem i am encountering is the mic was removed from main stero bus but i'm still hearing it coming through FOH .
@AllamHouse
5 ай бұрын
If the mic is coming into the console as a regular input (not in the talkback slot on the back of the console) you will need to: (1) confirm the Stereo LR is turned off (2) confirm it is. It going to BUSes that might be set to the LR (3) confirm it isn’t going to any FX racks that are coming into the LR If you want to send a copy of your scene to me to look at, email it to allamhousesound@ g m a I l . c o m
@c.s.5177
5 ай бұрын
I’ve been working on an x32 for a couple months now. Can I send a separate eq to monitors and mains? My guitar player doesn’t like when I pull any low end out ever. Also can I send a different effect to the monitors and the mains? I set up reverb and didn’t realize it was going to the monitors until they told me how good it sounded. I don’t mind sending it there, I’m just wondering if it can be separated for control purposes.
@AllamHouse
5 ай бұрын
For each input you only get one EQ. You can use this to shape the color of the input (guitar in your example) and then send it to different locations. With this in mind, there are some other options to make your guitarist happy... keep in mind, we all deal with them for this same reason. (1) Set the Tap Point for this input to be "Pre EQ" going to the Monitor BUS. This will grab the input signal after the Gain and Mute, but before any gate, EQ or compression you apply to the specific channel. If you do this for only this guitar input on the guitar monitor Bus it will change the Bus setting from Pre Fader (or Post Fader) to "Custom". This is done easiest in X32-Edit, but can be handled in the console albeit with less finesse. (2) Set the channel strip EQ as desired for the monitor send and then send this signal to an additional BUS where you apply specific EQ as needed for the house. This new Bus becomes your send to FOH (make sure it is set to feed Main LR while removing the specific input channel from feeding the Main LR. This video here speaks to this concept in a similar fashion, but it is geared towards live stream kzitem.info/news/bejne/ko2G0qh8p32fm6g In regards to your FX returns you have a few options here as well. You can keep the reverb you have and treat it as a monitor only verb. You would want to make sure the FX return is not feeding your Main LR. This gives them control over their monitors and you can leave that FX Bus alone. You can then designate another FX rack specific to Front of House (FOH) and only interact with this one. Another option (assuming their monitors are Pre Fader) is to just continue using the existing reverb in FOH and just don't change the mix going into the BUS that feeds the FX rack. Having their monitors Pre Fader will allow them to adjust the amount of this FX going into their monitors while you can control the amount going to FOH and everyone is happy.
@c.s.5177
5 ай бұрын
@@AllamHouse thank you so much for your thorough response!! I really appreciate it.
@boallmon324
5 ай бұрын
Wished I could find someone that has knowledge about the x32 full console. I could use help setting it up for our gospel group
@AllamHouse
5 ай бұрын
I do handle both in-person and virtual consulting sessions if you need specific help. You can start a conversation with me outside of YT by filling out the connect card on my website and that will come directly to me. sound.allamhouse.com
@88omarz
5 ай бұрын
@@AllamHousesent you a request. What email does your communication come as?
@AllamHouse
5 ай бұрын
The contact card will come directly to my gmail account. I haven't received any new contact card messages, so give it another shot and make sure to do the basic "I'm not a robot" question before you submit.
@88omarz
5 ай бұрын
@@AllamHouse yea I’ve sent two and seems it’s not coming
@AllamHouse
5 ай бұрын
Ok. Shoot me an email at allamhousesound at gmail . com
Пікірлер: 19