Thanks Jason. I'll talk about this in 791 today 👍👍
@mammoths100
Жыл бұрын
I glued the rear panel of my 1/48 M1A2 Abrams tank in the incorrect position a few days ago with Tamiya extra thin cement. Just realized it, panicked, and then just found this video. Your tip worked brilliantly! I had originally put on more glue than I likely needed so it took two passes in quick succession to do the trick. Fantastic tip, cheers from Canada
@ModelkitStuff
Жыл бұрын
glad it helped
@bigdaveyeo350
Жыл бұрын
you absolute legend! just helped an absolute newbie at warhammer get the paldrans off his space wolves to get the new wolf plate ones on. I thank you good sir! ❤❤
@philsreef746
4 ай бұрын
Mate you are a genius. Although I used Revell Contacta Liquid, applying more of it didn’t work. So using your theory of the glue warming up the plastic I put my parts under the hot tap and bingo they came apart. Many thanks.
@michaelstraker1027
Жыл бұрын
Brilliant! I've just tried this on a model I have made a complete mess of. The bin has been avoided! Thanks so much.
@ModelkitStuff
Жыл бұрын
Glad it helped!
@pixiestix6650
2 жыл бұрын
This video just saved me from ruining a model thank you so much!
@alricdark
3 жыл бұрын
Interesting and definitely one for the toolbox. Thank you.
@ronnybiktjrn9784
Жыл бұрын
works! managed to rip off a flamer turret, hull flamer and dozer blade off a chimera using this method, no real damages, only minor cleanups.
@ModelkitStuff
Жыл бұрын
It certainly works
@Corsario-ud1du
2 жыл бұрын
Did not know that. Thanks for the tip which will be very useful.
@aussiefrenchman-hobbytable9960
3 жыл бұрын
Hi , great tip , thanks fot sharing👍👍👍👍👍
@ukdave57
3 жыл бұрын
Great tip Jason. 👍
@RimsModels
3 жыл бұрын
great video my friend thats a really helpful tip thanks for sharing
@OzScalemodeling
3 жыл бұрын
Go for it Ron !! 👌👌
@matthewvalentyn751
Жыл бұрын
this is very helpful even though I'm not Ron, thank you for the great video!
@leslietarkin5705
Жыл бұрын
Genius!! You are a genius!! Thank you for sharing this! I just subbed!
@JeffStephen
10 ай бұрын
Thank you, just saved me a lot of worry about how to separate some wheels I stupudly forgot to put axle pins in.🖕
@thescalemodelcarguychannel8681
3 жыл бұрын
Very cool Jason I didn't know that!
@kensomething379
9 ай бұрын
THANK YOU!!! subscribed/all/thumbs up!
@ModelkitStuff
9 ай бұрын
Awesome, thank you!
@bigcharliesmodelgarage296
3 жыл бұрын
Nice. Thanks for sharing.
@philipcasa7379
2 жыл бұрын
outstading thank you very much
@kaspersaldell
Жыл бұрын
Ron here, thanks man.
@icantthinkofaname6184
Жыл бұрын
Thank you 🙏
@dariosmodelbuilds
Жыл бұрын
Neat trick!
@TerrySchaffers
Жыл бұрын
Super!
@raykan3643
7 ай бұрын
(help pls 🙏🙏) I want to take out the part of the engine of a 1/200 Airbus A321. Is it ok to only put the glue on the sides of the part ?
@ModelkitStuff
7 ай бұрын
assuming you have used liquid polly, use the same glue and only put it where yo originally pot it. in other words run the glue into the gap, pull it apart then don't touch it and let it dry
@inasmallerscale
Жыл бұрын
I used revell cement will it do the samr thing
@ModelkitStuff
Жыл бұрын
Yes any hot glue but the thicker the glue the harder it is to do it if you used contactor is more likely you will damage the parts
@chrisjulien7698
Жыл бұрын
Christ bless you, thank you very much
@g24joaquin2
7 күн бұрын
hi sir does this work with plastic I glued wrong the parts that I'm fixing with mighty bond
@ModelkitStuff
7 күн бұрын
@@g24joaquin2 sorry I do t know what sort of glue mighty bind is. If it melts the plastic then it should work. Try it with some scrap sprue first
@Datsun100Aisthebest
5 ай бұрын
Help, i glued my 1/72 plane propellers and stuff the wrong way and then i tried to do this the propellor itself came off and i had to remove it.. i guess idk what to do..
@ModelkitStuff
5 ай бұрын
send me an email with pictures modelkitstuff@gmail.com
@Datsun100Aisthebest
5 ай бұрын
@@ModelkitStuff Ok. 👍
@Datsun100Aisthebest
5 ай бұрын
@@ModelkitStuff I sended it.
@josephlfrazier9727
9 ай бұрын
I would have tried Acetone nail polish remover, before I found this to try. Would Acetone work? Have any viewers tried Acetone?
@evelynreyes4325
Ай бұрын
Does it work with humbrol poly cement
@ModelkitStuff
Ай бұрын
do you mean the liquid one or the tube one? not tried either but it should work with the liquid one. try it and let me know
@stuartmcdonald8669
3 жыл бұрын
👍
@cjstein2000
3 жыл бұрын
Would heat gun do the same thing?
@ModelkitStuff
3 жыл бұрын
Hi Jim, not tried that, I guess at some point there is a risk of the plastic melting where the glue is more precision.
@PhilippineCommander
2 ай бұрын
does it work at super glue?
@ModelkitStuff
2 ай бұрын
No superglue is not a hot glue. You need acetone for that
@memememe2674
3 жыл бұрын
That's fine on 2 chunky parts with no detail, try that on 2 thin pieces with rivot detail close by, you nerd to know when to try this and when to leave alone.
@ModelkitStuff
3 жыл бұрын
Indeed, wont be an issue for the Parts Ron has assembled
@jesuscopter9256
2 жыл бұрын
Does this works to remove models from bases?
@ModelkitStuff
2 жыл бұрын
It works on any two plastick items glued together as long as you use the same glue and its a hot glue not CA or PVA
@Victor-ie2ov
2 жыл бұрын
Would that work on Testors model glue?
@ModelkitStuff
2 жыл бұрын
no idea sorry never used it. however all hot glues it should work on try it on some scrap sprue and see
@Isdanoob
11 ай бұрын
Oh golly I cut a $100 model and I could have just watched this
Пікірлер: 56