After watching this video and winning some 51 aerometric and vacumatic parts on eBay I was able to repair and restore my old 1947 Blue Diamond Vac Parker 51. It works beautifully. Thanks so much for your videos.
@janhealeymicalizzi1051
8 ай бұрын
20:55 thank you. Just received 4 fountain pens - Parker 51, Moore and two more Parker fp. 1930’s or 40’s time frame. Your videos help me understand the process of cleaning these. Thank you.
@penkino1
8 ай бұрын
Im glad the videos are helpful to you. Good luck with your pens and enjoy them.
@mgmmaze
9 жыл бұрын
One of the many reasons I like the videos are your tools. They aren't the expansive ones most people seem to try and sell in other videos, but things found around or easy to make
@penkino1
9 жыл бұрын
mgmmaze Absolutely, i have no engineering background i simply like to make things. Most of my tools are home made. A lot of people may only have one pen they would like to service so it would be pointless buying lots of expensive tools.
@NunyaDamnBidnessBud
5 жыл бұрын
I'm new to the vintage pen hobby and have just started to 'tinker' about with my pens, so this was near perfect for me. Thank you.
@penkino1
5 жыл бұрын
Glad it was helpful for you Glenn, lots more videos like this to watch. Good luck
@earthmoonsun1
10 жыл бұрын
Hey Stef, thank you so much for your videos. I started collecting FPs only recently & love to fix things myself. This evening, thanks to you I was able to restore a Parker 51 Vacumatic that I bought in a 2nd hand market here in Seville, it was only €1 & it is my prize possession. Keep on rockin' in the free world Stef. Cheers Glenn.
@davidryden1175
3 жыл бұрын
This is amazingly helpful and demystified this pen for me. My mother gave me two pens of hers, which have been sitting in her drawer since the 1950s. The Esterbrook J was a snap to figure out, but I didn't know where to start with the Parker 51. After soaking the Parker in water for a week, using warm water on the barrel, and applying slight pressure, I got the pump assembly to come off. I would have never pulled apart the collector without your video... nor would I have figured out how to attach the sac pump. As a beginner, it seems to me to be a weird design and not at all intuitive! Again, thank you! I can't wait to get it working again.
@penkino1
3 жыл бұрын
Excellent, im glad the video was helpful to you. Well done with your pen, now enjoy it. Thanks David.
@drawstraw4483
Жыл бұрын
This video will never get old . It's as true today as it was then☺️ thank you sir for the extreme detail!! Things were made really well back in those days. I collect pens and just realized 💡 I have this exact pen Different color though. And until I get into it , it seems I won't the exact date of it it will be a daunting task, but I might try it? On the one I have it's in working order. Infact I till now thought it to be one of my ugliest pens☺️ boy was I wrong... you got me thinking all the work that went into crafting such a pen...Excellent video my friend 👍
@penkino1
Жыл бұрын
I hope it was usefull to you. Thanks for watching. Enjoy your pens.
@williamruck
5 жыл бұрын
This video has been great. I was given a blue diamond vacumatic and by following the video (and ordering a few parts from Pendragons) I now have a wonderfully working pen. Thanks a lot.
@penkino1
5 жыл бұрын
Excellent well done Will, im so glad it was helpful. Enjoy your pen.
@kapirk2244
5 жыл бұрын
Fantastic instructional video. Thank you! It is quite a job to fix one of these but it looks well worth the work.
@penkino1
5 жыл бұрын
Thanks for watching. They are not the easiest to restore but great pens once done.
@conradsmith9332
5 жыл бұрын
Thank you so so much for this. I have fully taken appart and cleaned my parker 51 vacumatic and am now waiting on a sac. :)
@penkino1
5 жыл бұрын
Im glad it was useful to you Conrad, well done.
@eithr
12 жыл бұрын
Awesome video. I just picked up a 1948 vacumatic 51 demi. I was really curious how the mechanism works. This video was very helpful. Thanks for such a great video.
@joelmcpherson8286
2 жыл бұрын
Thank you for the video; I just restored mine, writes great.
@penkino1
2 жыл бұрын
Glad it helped Joel, so well done. Enjoy the pen.
@LanciaD50
11 жыл бұрын
Thank you guy! I've repaired my old 51 thanks to you!
@penkino1
12 жыл бұрын
I hope it encourages more younger collectors,please share it with other...Good luck.
@joyciejd9673
7 жыл бұрын
Great video. Now I know how my Gandpa's vacumatic pen is built. Now I also have an idea about what is wrong with it and I will send it for repair. Wish you were in NY, I would send it to you!
@penkino1
7 жыл бұрын
Thanks for watching. I receive pens for restoration from the four corners of the earth, the world is only a stamp away.
@stealthski
12 жыл бұрын
i love fountain pens, ive had a hard time finding such thorough videos until now, keep it up!
@penkino1
12 жыл бұрын
Hi..Thats why it was made to help people like yourself.Thanks for watching...
@wryan8
Жыл бұрын
Brilliant, Vacuumatics are a real pain to service. Old George and Kenneth Parker always had a "better idea". If they were alive today, I would send them a nasty gram.
@penkino1
Жыл бұрын
Yes i agree they can be a bit fiddly, but lovely pens once serviced. Thanks
@christracey3833
7 жыл бұрын
A very informative video. Have my late dad's Parker 51 Vacumatic and other pens and hoping to bring them back into service. Thanks
@penkino1
7 жыл бұрын
Im glad it was informative and i hope it helps with your pens. Be careful and have some patience as you may damage your pens. Good luck.
@bundaeggi
5 жыл бұрын
Another wonderful video, Stef! I was able to dismantle a P51 Vacumatic I picked up by following your video. Still need that nut to remove the back, but at least I know what to do. This one's got a bad diaphragm.
@penkino1
5 жыл бұрын
Excellent im glad it was useful to you. Good luck with the pen John.
@darhopkins5433
Жыл бұрын
I have just discovered this absolute treasure of a video! THANK YOU! Greetings from Cincinnati, Ohio, USA!
@penkino1
Жыл бұрын
Glad you enjoyed it Dar, i hope it was helpfull. Thanks for watching.
@hootraus
11 жыл бұрын
Hi Penkino1 thks for the reply,yes pen is vacumatic the nib was splayed out I have straitened the tines out but on close inspection it looks like one on the little pads has been damaged, again many thks for video a picture is worth a thousand words. Regards Tony
@tomasvera5362
11 жыл бұрын
excellent job!! And thanks for the comments about ebay-ing replacement parts. I would have never guessed that part are still being made!
@penkino1
11 жыл бұрын
Im glad it was useful for you and thanks for watching.
@orangefanity
3 жыл бұрын
I have found but not confirmed the thread pitch of the nut shown at 6:24 is a 5/16"-32 to remove the vacumatic pump. This is a specialty size but can be found through online retailers or specialty fastener supply stores if you are inclined to try and make your own.
@hanford_adventures
11 жыл бұрын
I received my Parker 51 December 24 and I love it
@MataH1
Жыл бұрын
Again please show how you remove the parts, not when it's already done. Better show than explain. That said, it a great and useful video. I now know I will not even try this one!!
@penkino1
Жыл бұрын
I have made lots of "How to" videos, a lot of pens the procedure is the same. Thanks
@penkino1
11 жыл бұрын
Your on the right road with soaking the filler unit. Try using some lighter fluid to release it and some gentle heat (hair dryer). Most of all use PATIENCE.
@aredfalcon8546
9 жыл бұрын
Stef this has been a HUGE HELP !! Thanks for taking the time !
@penkino1
9 жыл бұрын
A Red Falcon That is why they are made, to help. So im glad it has been useful.
@penkino1
12 жыл бұрын
Thanks for watching...I am not sure of the nut size but i know i found the size on line but i cant remember were.On the vacumatic pens the breather tube is about that size so that is normal.They are normally made of metal or if it is the plastic material then most times they are fine to reuse.Ultrasonic cleaner if you know some one that has one,if not then soak in water with a little ammonia added.I hope this help....Good luck. PS What are you looking to source ?
@penkino1
12 жыл бұрын
The breather tubes were made of sterling silver and have a tendency to corrode and break.You may see a piece is still in the bottom of the feed,that needs to be removed before a new one is fitted.(That's another video i will do to try and show you).New breather tubes are available to buy online.The nib can be ground and polished but it is a little difficult and i would not recommend you do it yourself.If you do not like your nib i would be quite happy to exchange it for another nib....
@NorthSaintPaulNews
2 жыл бұрын
He does not say so.. but when he squeezing the barrel with the ruuuuber tipped pliers he is pinching the barrel on the threads so it won't budge, then you can turn the feed section off.. My ancestors are from ancient Cholderton, Wiltshire 1550's Rev. De Nicholas Noyes
@penkino1
2 жыл бұрын
Sorry im not quite sure what you mean ? But thanks.
@fountainpen2815
11 жыл бұрын
Thank you very much for this video. We shared it on our Facebook page.
@penkino1
11 жыл бұрын
Im so glad they helped you, well done with your pen. Enjoy it.
@steventrosiek2623
7 жыл бұрын
Wonderful job, Stefan! You're a master!
@penkino1
7 жыл бұрын
Thanks, glad you liked it.
@penkino1
12 жыл бұрын
So i gather the piston is actually out of the end of the barrel but stuck in the blind cap ? If that is the case then the same applies,soak or gentle heat.It may not work straight away so be patient and repeat.Use section pliers to try and loosen it.Gently does it...Good luck.
@julianaalves1686
Жыл бұрын
Era o que procura muito obgd sou do Brasil 🇧🇷🇧🇷
@penkino1
Жыл бұрын
Thanks for watching from Brasil. 👍
@Coney01
7 жыл бұрын
Loved your clear presentation of how to service a Parker 51 Vacumatic Fountain Pen. I have one that needs to have the sac replaced. I would love you to do the work and will be in touch.
@penkino1
7 жыл бұрын
Glad you enjoyed it, i hope it was helpful. Thanks for watching.
@ramiejose
12 жыл бұрын
hi, how do you take the gem out of the lid of the parker 51, is it ok to use warm-hot water to take the hood off and is it completely necessary to use adhesive when you put the hood back on? thanks ps great vid, really helped
@eduardoa5874
6 жыл бұрын
Very good explication , thanks from Chile
@penkino1
6 жыл бұрын
Thank you for watching, give my regards to Chile.
@Roflcopter4b
12 жыл бұрын
I'm terrified my noob hands will kill this gorgious pen.
@eduardoa5874
6 жыл бұрын
Many thanks, HAS SERVED ME A LOT, GRATEFUL
@penkino1
6 жыл бұрын
Im glad it was useful to you Eduardo. Thanks
@penkino1
11 жыл бұрын
Thanks, im glad you enjoyed it and that it was helpful.
@ruchem71
5 жыл бұрын
Nicely done! Thank you for this informative video.
@penkino1
5 жыл бұрын
I hope it was helpful, thanks for watching.
@michaelgamble296
Жыл бұрын
Aligning the nib with the hood is by 'rule of thumb' then! Ha-Ha! Good demonstration
@penkino1
Жыл бұрын
Ha ha, yes you could say that Michael. Cheers
@penkino1
12 жыл бұрын
Glad you like it,but apart from you i do not seem to be able to get a response...So i will see ? Thanks for watching.
@linedog19delta
7 жыл бұрын
Nice job Steph thank you , I'm brand new and will be looking forward to seeing all your videos . Just to let you know I'm in Tucson Arizona .
@penkino1
7 жыл бұрын
Thanks, im sure there are enough videos to keep you occupied. I hope the weather is a little better in Arizona than lil ol England.
@linedog19delta
7 жыл бұрын
Yes the weather here is good in the fall .I'll give you an up-date if I can get this to work right ...www.bing.com/search?q=tucson+weather&form=EDGNTC&qs=LC&cvid=e35542c7b4c44da08c745ae5c67a735d&pq=tucson+we&PC=DCTE
@penkino1
7 жыл бұрын
It looks a lot nicer than here. Im jealous.
@penkino1
11 жыл бұрын
Hi...I think you will find a video on how to remove the jewel...Take a look.
@penkino1
11 жыл бұрын
Hey well done, im glad it was of use to you. Now enjoy your pen...
@antoniocarlosfoltran8958
3 жыл бұрын
grate job, thanks
@penkino1
3 жыл бұрын
Thanks for watching!
@penkino1
12 жыл бұрын
Hi...Yes you can use hot water to take the hood off,and to take the jewel out of the cap is a bit long winded to explain.So i have made you a video on how to remove the jewel and how i remove the hood.So keep watching......Thanks for viewing....
@jmfa57
5 жыл бұрын
Nice video, thanks for unlocking some of the mysteries "under the hood", so to speak. Years ago I invested in special tools to remove the vacumatic filler mechanisms from the barrel. The standard size works (obviously) with standard, as well as debutante sizes. There is a oversize model for the big Vacs. The design is identical to Parker's original tools, and they make a miserable job less miserable. I've fixed a lot of Vacumatics with these tools and they are much easier to use than most of the alternatives available. Just wondering if you've used them, and your opinions of them if you have?
@penkino1
4 жыл бұрын
Im not quite sure to what tools you are referring to as there are a number available. Buying these special tools can become very expensive. I use the simple brass C rings which work for me. Thank you for your comments. .
@hangaroundainkwell1450
3 жыл бұрын
@@penkino1 Hi Stef - Where did you acquire, or how did you make, the brass C rings?
@penkino1
12 жыл бұрын
Do you mean the blind cap will not unscrew off ? If so try using gentle heat with a hairdryer or immersing the barrel end in hot water.Repeat if necessary and patience.Hope that helps.
@SlapShotRegatta22
3 жыл бұрын
What is the best method of applying heat? Heat gun? I assume you should always try to stay away from an open flame.
@penkino1
3 жыл бұрын
I have used my trusty hair dryer for many years. NO open flames. Thanks
@mrpilotsapien7705
4 жыл бұрын
2020: next stop acquiring one of my own.
@penkino1
4 жыл бұрын
Great idea Abraham, they are very nice pens to use. Thanks
@penkino1
11 жыл бұрын
Hi...No problem, its there to help .....
@asifmishu9035
2 жыл бұрын
Thank you
@penkino1
2 жыл бұрын
You're welcome Asif, thanks for watching.
@justinkruse7791
10 ай бұрын
I have a question. I had a bad sac and I see a little white balk inside of the black cup. Does that need to come out?
@penkino1
10 ай бұрын
Yes the little ball has to come out (carefully) and you will find a new ball inside the new diaphragm. Good luck
@scylacsky
2 ай бұрын
Hello, what could i use to remove the vacuum pump without a wrench?
@penkino1
Ай бұрын
I would not recommend you try without the wrench in case you break the pump. Or send it to a pen restorer to have it done correctly. Good luck.
@ramiejose
12 жыл бұрын
wow! thankyou soooo much, thats very kind of you. i will look out for it
@andrewp4805
7 жыл бұрын
Thank you for this video- i bought one of the old blue cedar finishes at the DC pen show but it is missing the sac, the pump is chipped where that ball sets and the breather tube is def not clear. I had no idea what was wrong with it until i saw this.
@penkino1
7 жыл бұрын
If the ball cup is chipped then you may find the new sac will not sit in the cup as it should, so may need to be replaced. The breather tube just needs soaking and cleaned. Good luck.
@andrewp4805
7 жыл бұрын
thank you!
@robertmarkham1101
9 жыл бұрын
Very informative - thank you so much!
@penkino1
9 жыл бұрын
Robert Markham Thanks, im glad you found it informative.
@kil9o8
11 жыл бұрын
Thanks for sharing! I tired to remove a standard size Parker Vacumatic filler unit with a pair of ordinary pliers wrapped by several layers of rubber gloves. However, the rubber layers were torn apart and some marks were left on the threads. Now the blind cap screws on and off, but with a bit of resistance. I wounder whether it's still possible to remove the unit with the "removal screw" shown in this video (and whether you sell these individual screws), since its threads are partly messed up.
@penkino1
12 жыл бұрын
That's no problem,if you do not feel confident enough then find a repair person who is close to you and send it to them.Unfortunately i am across the pond otherwise i would have had a look at it for you...Good luck. PS How did you remove the pump in the fist place ....
@prgcorrea1
10 жыл бұрын
Dear Stef, I like very much your videos. My question is: how would be the proper way to remove the old pellet from the vacumatic pump? Please detail.
@penkino1
10 жыл бұрын
Paulo Corrêa Hi Paulo...Video done for you, good luck with your pen.
@penkino1
12 жыл бұрын
Hi...Im glad you like it.......
@therewasatime8777
8 жыл бұрын
Stef, love your most informative videos. How were you able to remove the inner cap and clutch? what tools are you using for such and operation? Thanks
@penkino1
8 жыл бұрын
Thanks tm glad they are informative. Most of my tools are home made, however they do not always work. Pen repair tools can be purchased on line from established repair people. Good luck.
@penkino1
11 жыл бұрын
I think it would take to long to do. My collection is always rotating as i will sell to buy others. As far as favorites i have lots of favorites for different reasons. By showing them individually viewers can see them in more detail...
@ramiejose
12 жыл бұрын
oh, and two more things...when i took mine apart, the feeder tube was all in bits and had holes in it, do you know where i can get hold of a new one, or if i can use anything as a substitute, also, my nib writes very thick, where can i get a new one, or can i change the thickness myself? thanks
@ga2621
4 жыл бұрын
Very very good! Thank you!!! :)
@penkino1
4 жыл бұрын
Thanks for watching.
@penkino1
10 жыл бұрын
Hello Tim..Ive never considered removing the Sheaffer Vac seal unit with the Parker Vac split ring, interesting. Unfortunately i do not have any Sheaffer Vacs at the moment so i cant tell you the thread size, sorry. Maybe Mr Oldfield at Penpractice could advise you...Good luck.
@Glychd
7 жыл бұрын
When you say apply heat to remove the filler unit, do you mean hot water, or a hair dryer? If it's a hair dryer, how long would you say to do it for?
@penkino1
7 жыл бұрын
Personally i use my hair dryer. There is no specific time but i constantly check the heat with my lip. If in doubt use it for a short period and if needed repeat the process BUT have patience. Good luck.
@penkino1
11 жыл бұрын
Hi..You can buy them from chillipea on ebay. Please mention that i recomended them. Good luck with your pen.
@pelahale
12 жыл бұрын
keep doing these awesome vids.
@IGBPI314
11 жыл бұрын
Seen your video, Seen the same on ebay, Just got it in.. Where do you get the diaphragm sac from ? Can you help ? Who sells these ?
@alanwallach2432
2 жыл бұрын
How do you revove the jewel. You show how to reinstall it but not how to remove it.
@penkino1
2 жыл бұрын
I think i made a video showing how to remove the jewel, go take a look.Cheers
@mariod5760
4 жыл бұрын
Steph, brilliant as usual! Using a little ingenuity to make your own filler removal wrench with a cut brass screw....did you buy it threaded? Something from plumbing aisle at hardware shop? Been thinking to do a Vacumatic after finishing a few Snorkels....nice video :)
@penkino1
4 жыл бұрын
Hi Mario, no i bought them from Laurence Oldfield at a pen show he sells them on his web site.Good luck with your pens. Stay safe.
@Fontaine_de_Can
Жыл бұрын
Hi there! Do you still service pens? I have a Parker 51 with a damaged nib
@penkino1
Жыл бұрын
Any inquiries email me. Cheers
@Roflcopter4b
12 жыл бұрын
No! The threads that should be on the end of the piston have stuck themselves in the blind cap, thus trapping the piston. It is a strange issue.
@penkino1
11 жыл бұрын
Im not sure what you mean, there is no glass ?
@prgcorrea1
10 жыл бұрын
Dear Stef, I've watched your video. But do not think you understood my question: I want to know how to remove the pellet from a vacumatic bomb ever used. What tool to use? How should this operation be done? That you did not show in your video. Very grateful, Paulo Correa
@penkino1
10 жыл бұрын
Paulo Corrêa Hi Paulo...Your original question was " My question is: how would be the proper way to remove the old pellet from the vacumatic pump? " That is what i have tried to show in the video. Sorry if i have not shown that in the video then i do not understand what you are asking.
@prgcorrea1
10 жыл бұрын
OK, Stef. Still in doubt, but ... thanks!
@penkino1
10 жыл бұрын
Paulo Corrêa No problem, thanks.
@Roflcopter4b
12 жыл бұрын
My piston is stuck in the blind cap. How do I get it out?
@penkino1
11 жыл бұрын
Hi...You can buy them at penpractice..Good luck.
@mresimulator
6 жыл бұрын
Great video Stef! I'm gonna try to service my 47' P51 vacumatic. I have not a ultrasonic bath. After remove the hood, collector filler and nib, would you please give me a step-by-step indication and recommendations to remove the vacumatic pump? For example: should I soak the pump by inside the barrel? should I apply hot water or dry hot air? I have a C-ring. Best regards and thanks in advance, Jose Luis
@penkino1
6 жыл бұрын
Hi Jose. Thanks for watching. I have done numerous "How To" videos on Parker pens. Sorry you will need to stroll through them and watch them. Good luck with your pen.
@julianomaiabraga4032
4 жыл бұрын
Hi! Mine started to leak from vac pump What it could be? Maybe a puncture on the rubber sac?
@penkino1
4 жыл бұрын
Yes it sounds like it needs a new diaphragm and service. Thanks and stay safe.
@penkino1
12 жыл бұрын
Hi...Nice to see you young,uns watching.....
@laideae
6 жыл бұрын
As always, very helpful. Now I have more of a clue of what goes on inside my old Parker Vacumatic. By the way, the nib on my pen can be moved sideways when writing with the pen, does this mean the feed is worn or that the nib doesn't belong to the pen? It happens to be a semi flex gold nib.
@penkino1
6 жыл бұрын
Glad it was of help. It sound that something is not right with your pen as the nib should not move. Difficult to comment without actually seeing the pen. Thanks.
@hootraus
11 жыл бұрын
Hi Thank you your video is great and very helpfull I've now stripped my fathers old 51 down and need a new nib and ink sac the old nib is marked 14 kt Parker England 58 could you suggest anyone who could supply these items Thanks again Tony
@Mikeoo21
7 жыл бұрын
Wonderful video...you should be sainted, knighted or both...do you have a video on fixing cap dents?
@penkino1
7 жыл бұрын
Glad you liked it. Saint Stef, sounds good. Iv made so many im not to sure you may have to look through the videos. Many thanks.
@ozzobikes
5 жыл бұрын
Hello, how to adjust the ink flow on the p51 vacumatic?
@penkino1
5 жыл бұрын
The pen needs to be correctly serviced and cleaned. If the ink flow still needs adjusting then you will need to adjust the feed and tines. Good luck with it.
@hanford_adventures
12 жыл бұрын
how often would you have to take these apart for cleaning if you were to use the same ink?
@stealthski
12 жыл бұрын
very informative thanks
@sgrigera4192
3 жыл бұрын
Great video. What do you use to remove old ink?
@penkino1
3 жыл бұрын
Thank you. Depends were from ? I use a ultrasonic cleaner to clean my parts. And it depends what the parts are and made from. Good luck
@RamWhamBam
11 жыл бұрын
hi very goodf video can you show how you remove the jewel and what is the diameter of the nut you use please thanks
@gordoncan
3 жыл бұрын
Hi Steph! Could you give me some instructions or so to say to make that c ring/removal screw for the pump?
@penkino1
3 жыл бұрын
Hi Gordon, why make one when you can buy one online. They are inexpensive to buy. Good luck.
@gordoncan
3 жыл бұрын
@@penkino1 oh? I’ve been looking around but the only ones available are the tools which cost quite an amount.
@penkino1
3 жыл бұрын
No you do not need lots of expensive tool, C ring here for £5.00 www.penpractice.com/page3.html
@debuggz
11 жыл бұрын
Where can I find the brass screw like you had to remove the pump?
@glenknight8859
6 жыл бұрын
Hi Steff, just love your videos and explanations. I have a Parker 51 similar to the one you showed - great video. However, I am perplexed as to what size vacumatic diaphragm I would need to fitr my 51 (it had the year 1946 on the base of the nib after I took it out of the feeder). Also where can I purchase such a diaphram from once I know the size, as there isn't anywhere in my State of Victoria, Australia who has even heard of such things. Regards Glen.
@penkino1
6 жыл бұрын
Hi Glen, thank you for watching and for your comments. You can purchase the diaphram here and they will also help you with the correct one www.vintagepensacsandparts.com/product.php/5/2/ink_sacs_for_parker_vacumatic please mention me. Good luck
@AquaBara
7 жыл бұрын
When you were soaking the pen's pump area to loosen the solidified pump gunk did you just leave the pen upside down in a small glass of water or did you completely submerge the pen? i ask because the pump on my Vacumatic I just received seems to be solidified as well.
@penkino1
7 жыл бұрын
Soaking the pump area will help to remove any "gunk". Go carefully and have patience. Good luck.
@penkino1
12 жыл бұрын
As long as the pen is in working order there is no need to take the pen apart.An occasional flush with water is all that would be needed....
@RicardoAllmeida
11 жыл бұрын
How do I remove the glass from inside the plastic cap?
Пікірлер: 201