Man, you're " The Resource Hub " for all the RTR 200 owners out there. Never did own an Apache till date yet a heartful thanks to you. Keep it coming...
@thesportztourer
6 жыл бұрын
Thanks a Larsen William for always coming up with these beautiful comments which really makes me smile 😊
@SunnyGarewal
6 жыл бұрын
The explanation was top notch!
@thesportztourer
6 жыл бұрын
Thanks a lot Sunny Garewal for the appreciation 😊
@AnkurRajpali
6 жыл бұрын
So clear and concise! :) Never knew braking oil is corrosive
@thesportztourer
6 жыл бұрын
Thanks Ankur 😊 Happy to share info 👍
@muriga_comedy
Жыл бұрын
Just learnt that today 🙏
@golammorshedronik9196
3 жыл бұрын
I don't understand how does a channel like this have so poor amount of subscribers. This channel deserves millions of subscribers.
@thesportztourer
3 жыл бұрын
Thank you so much. Love and support from enthusiasts like you means a lot to me ❤
@sanketnawle5417
6 жыл бұрын
Much needed, as i was not getting proper feedback from the brakes.
@thesportztourer
6 жыл бұрын
So it's Time to get to work for the admin 😊 all the best 👍
@monishm2128
6 жыл бұрын
Excellent demonstration and video bro 👍 the professionalism you show is appreciable ! Not even pro mechanics say about the brake fluid being corrosive and I've seen so many bikes with a corroded oil reservoir and brake lever just because of oil spillage..
@thesportztourer
6 жыл бұрын
Thanks a lot Monish for the beautiful words! Its always a joy to read comments like this from you, it's a feeling of satisfaction after all the hard work that goes on to making these videos.
@monishm2128
6 жыл бұрын
You're welcome The Sportztourer ! We the subscribers would love to see such good content KZitem channels grow up really well 😊
@PratikKumar_blade
6 жыл бұрын
That was one very informative video. Everytime i see your videos i just wished i had the Apache. I dont know if u remember or not, in one of ur long touring videos i said ur videos make my confidence more strong of buying Apache. Unfortunately I didnt get it, waited for 1.5 months for the matte white model but they said productio isnt there as of now for matte white. So after waiting for long i opted out and bought Fazer25 instead. Fazer25 is also a great bike but it cost me more. Anyways.... Great video once again.. Kudos to you!!! 😊😊
@thesportztourer
6 жыл бұрын
Hi Pratik, Of course I remember the conversation. Well this video is applicable for your Fazer 25 as well. Heartily Congratulations on getting the Fazer 25! I love that torque filled engine & that instant acceleration 😊
@PratikKumar_blade
6 жыл бұрын
The Sportztourer Thank You Sportztourer..... Love your videos waiting for more... 😊
@PrafulMeena
6 жыл бұрын
I will definitely try it, need videos like this for DIY, No need to spend on service center then.
@thesportztourer
6 жыл бұрын
That great Praful Meena 👍 just be careful after you are done (check the braking atleast for 2-3 times) , I really don't want anyone to get injured. All the best 👍
@neotrinity99
4 жыл бұрын
I spent 150 at service center just to get this fixed
@tejasa9033
5 жыл бұрын
Beautiful explanation about brake bleeding Best video I sawed in the KZitem for brake bleeding Understandable to everyone also you showed the video of professional level servicing of brake. Keep it up you are doing great job!! I want more videos like this.
@AvinashRathod
4 жыл бұрын
This is the first video I watched on your channed, didn't even check the other videos but subscribed and thumbs up, good work should always be appreciated.
@thesportztourer
4 жыл бұрын
Thanks a lot for appreciating the efforts. Subscription means a big motivation to make more such content 😊
@kareemsks3377
5 жыл бұрын
Ithana accha tho service center me bhi nahi karte 😍😍love it 👍
@Mediterranean.barber
2 жыл бұрын
Best explanation 👌 i fixed my brakes in few seconds after i watched this video
@kausti3
Жыл бұрын
Best vdo for all disc brake setting problems in bike ❤
@ankitpare6493
5 жыл бұрын
Enrolled in the University of The sportzTourer :) And you are my professor ... Absolutely love your content.... Bohot age jaoge bhai....
@thesportztourer
5 жыл бұрын
Thanks a lot Ankit for the wonderful comment and words of appreciation! Means a lot to me 😊
@jaideepak2298
6 жыл бұрын
Super bro please make regular videos atleast one video in a week 😀❤️❤️❤️❤️
@thesportztourer
6 жыл бұрын
Thanks for showing so much interest 😊 As you can see my focus is on quality content (don't know how much I am successful in it) but I do feel the need to be more frequent as comments/appreciation from riders like you is addictive!
@jaideepak2298
6 жыл бұрын
The Sportztourer don't worry bro your clarity of the content is next level as a pro and I personally learn much more things about the technical specs of my bike and now I own RTR 200 your videos made me feel like i can handle any situation of my bike really love your channel and you always a lovely subscriber waiting for much and more videos
@abhisekhnanda7737
6 жыл бұрын
Ur contents are always awesome 👌 Bhai
@thesportztourer
6 жыл бұрын
Thanks a lot Abhishek Nanda for making me feel awesome 😊 glad that you like the content.
@ArunKVJcatchmebud
4 жыл бұрын
Hi.Thanks for tonnes of info and tips. I'm getting addicted to your videos on RTR 200.. Can you please make a detailed Video for the back brake maintenance?
@furqananwar2839
Жыл бұрын
Bro is this for rear brake too?? Your explanation is superb keep going and show us more life saving hackk
@subinsuresan3598
5 жыл бұрын
Just one word , Precise ❤️ Thank you so much bro
@jayasuryahanumanula1695
6 жыл бұрын
Dude your videos are very informative But meanwhile the brake oil you used is dot 4 and the previous oil was dot 3 you shouldn't mix them both as they are completely different in their properties dot 4 is the best one as it has high heat resistant properties in it So make sure that you get it changed by flushing the whole oil and refilling it with dot 4 one
@thesportztourer
6 жыл бұрын
Hi, Yes you are right about mixing brake oils when it comes to DOT 5, otherwise you can always mix DOT 3 with higher standard DOT 4 as DOT 3, 4 & 5.1 all are glycol base fluids which are totally soluble & retains their properties of non compressibility & heat resistance when mixed. However DOT 5 silicon based brake fluid is non compatible with these brake oil. I agree with your point of not mixing them as it beats the purpose of using superior brake oil it is similar to mixing mineral engine oil in fully synthetic engine oil. Thanks a lot for the input Jaya Surya as it will be helpful to many riders visiting the comment section with doubt 👍
@anushibinj
6 жыл бұрын
Such an underrated channel
@akshayjoshi5955
2 жыл бұрын
Please make a video for ABS systems also. Did some DIY with the ABS system, now the front brake doesn't get tight. ASC says it will get tight with time, but have already ridden 200kms after that. There seems to be no air in the system as when bled only liquid comes out, there are no air bubbles. And I've done the bleeding part almost 7-8 times already but no progress.
@sprasanth867
3 жыл бұрын
Im new to this channel..i like your content..You got a new sub !😅👍
@radiocity246
5 жыл бұрын
Didn't tried yet but Good professional way to make video.
@thesportztourer
5 жыл бұрын
Thanks a lot for appreciating the efforts 😊
@aniket9290
6 жыл бұрын
Superb video as always....👍👍👍 But my question is if I mistakely spill brake oil on bike body parts then after that what should I do...??
@thesportztourer
6 жыл бұрын
Thanks Aniket 😊 If you spill then immediately wipe it of with a absorbant cloth/tissue don't rub it while removing it. Later clean the surface with water or IPA.
@aniket9290
6 жыл бұрын
The Sportztourer thanks....👍 This should be much needed precaution in that case
@asifrahman3407
Жыл бұрын
Thank you so much for this video. This solved my problem on RTR 150.
@thesportztourer
Жыл бұрын
Glad to know that the video helped. Happy to have an OG Apache rider on the channel.
@vimalwodaiyar86
5 жыл бұрын
I know street smart but thanks to you. Now I know a bike Smart🙂
@thesportztourer
5 жыл бұрын
Ha ha ha.. you surely know how to play with words! Thanks a lot Vimal 😊
@jeshwamera1783
6 жыл бұрын
Amazing man how come I missed channel for these many days
@neotrinity99
4 жыл бұрын
Nice, i think my rtr front disc has some air, brake is getting little jammed, its annoying.... Can it happen to rear disc brake too?
@dmcxop1921
5 ай бұрын
I felt my brake feedback come when i hardly press lever should i do it ??? Or its normal
@lokeshpatel5018
4 жыл бұрын
Hi Dude, Thanks for this detailed video. I followed this for my rear brake system in my RTR 200 ABS version and brake started leaking somewhere near control unit beneath the seat. What could be reason for that? Is that because, I once started the bike just to check the brake performance while doing this process?
@vaibhavkamath2885
5 жыл бұрын
Can u make a similar video for rear disc brake also
@deepan70
4 жыл бұрын
When changing new disk pad and break oil is it take some days to work full efficiency
@ArchiesBhartiyaRail27
3 жыл бұрын
AOG should promote this channel.
@mdzaid5925
8 ай бұрын
Does tying the brake lever overnight helps?
@dmcxop1921
5 ай бұрын
Yes
@harankumar1
6 жыл бұрын
Once again a great rendering towards the video presentation. keep it up Sir. And i have an Apache 160 , i feel the same loose disc brakes during recent times, but that is over my rear side. Any solutions for rear disc loose brakes . Thank you :)
@thesportztourer
6 жыл бұрын
Hi Haran Kumar, The process is same for the rear disc brakes, you just have to pump the rear brake pedal instead of front brake lever.
@harankumar1
6 жыл бұрын
The Sportztourer thank you :)
@clydesequeira8813
4 жыл бұрын
The dot 4 grade needs to be used for topping up the rear brake reservoir too? I own a 200 4v..
@akshayakishor9853
6 жыл бұрын
Simple ,Straight & Effective thanks 👌👍
@abhishekchakraborty293
6 жыл бұрын
Great presentation brother..Simple and informative as always. i have a question.. i own 2017 apache 160, and as you are aware of the vibration issues like every other apaches, i have managed to reduce the vibs to a great extent by constant visiting at the tvs authorised service centers.. now vibs hit the bike at around 60-65 km/hr(previously around 50km/hr).. I feel that this vibration can further be reduce to some more extent if i change the brand of engine oil. presently i have been using the fully synthetic oil supplied by tvs.. I had a conversation with the service centre guy & i asked him if i can change tvs FS oil with Motul 7100, to which he said dont do it now as your bike is under warranty and if anything goes wrong in bike be it anywhere, during inspection TVS may reject your claim by pointing out about non using this recommended engine oil. The mechanic is a nice guy and he has a good knowledge about the work but you tell me if he is right.. Cant i switch oil brand during warranty?
@thesportztourer
6 жыл бұрын
The service center guy is right as TVS can have their say on engine oil in case of warranty & there are many cases with other manufacturers as well regarding engine oil. TVS has mentioned about the recommended engine oil in the owner's manual. Same applies to any electrical accessory you install on your motorcycle. Warranty also depends upon your service center as they are one who deals with most of the cases.
@abhishekchakraborty293
6 жыл бұрын
The Sportztourer Thank you so much. You took out time and replied. Now that you have confirmed it, i am sure about the engine oil part. Your reply really made me glad . I wish i could meet you sometime.. take care brother
@amarkashyap2984
6 жыл бұрын
Best channel for rtr 200
@thesportztourer
6 жыл бұрын
Thank you so much Amar 😊 I am glad that you liked the channel 👍
@tridip.chakraborty
3 жыл бұрын
Small question - on ABS brake setup, does the pumping needed while braking to improve the power coz single pressing hard is not effective. One more thing when u pull the lever, it stops at a point and if u pull it full further with force then the lever goes back a bit. Is this normal?
@anirudharane
Жыл бұрын
Hi i have interceptor 650 front disk rotor has play more than it requires and it makes lot more noise when i go through potholes. Is it possible to repair this issue or need to replace? And how to repair please advise - frpm Mumbai
@arunavachanda2834
5 жыл бұрын
Should we go for this DIY maintenance for the ABS brake systems?
@thesportztourer
5 жыл бұрын
Hi Arunava, The bleeding process remains the same for ABS equipped motorcycles (might take some more time).
@arunavachanda2834
5 жыл бұрын
@@thesportztourer ok sir, now I understand, the brake line will go through the ABS unit.. so it will take a little long time, thanks for the info...👍
@smokingwheels6786
6 жыл бұрын
you have awesome quality and content
@thesportztourer
6 жыл бұрын
Thanks a lot for appreciating the content 😊 a lot of effort goes in making these videos 👍
@shameerl4u
5 жыл бұрын
Bro... thank you so much. I tried to change disk pad myself. But it was not working properly. But after ur review. I tried that. It’s working awesome. Thank you so much. 😂😂
@chinnisubhash94
6 жыл бұрын
awesome video brother. Same works for rtr160 or any bike with disc brakes ryt
@thesportztourer
6 жыл бұрын
Yes its the same for RTR 160 👍 Thanks for the awesome comment 😊
@7hanuk
4 жыл бұрын
Bro asbestos vs non asbestos brake shoes, which one supports better braking ?
@venkateshvanaras779
Жыл бұрын
Bro I have small question.. Does it fits 200 4v back disc to 160 4v I want to change back disc of 160 4v
@FirstlyIndian
Жыл бұрын
I am having Yamaha FZ V3, from last 3-4 months Brakes and ABS is not working. I have shown it to Yamah service centre, without checking, they said, it has problem in ABS Box. I asked them to check the cylinder piston in breaks and they had changed it, but problem is not solved. They said, we need to change the ABS Box, which is of 15,000 Rs. But they dont have it. Local garage me bhi dikhaya but problem solve nahi hua.. oil reservoir me kabi kabi bubble ata hai kabhi nahi ata. Yane oil pass kabhi hota hai, kabhi nahi hota.. Brake lagata hi nahi..kuch upay batayiye...No solution.. Bleeding se air nikal diya but, 2 3 sec ke liye break tight hota hai aur ekdam se spongy ho jata hai..😔 Abtak maine 1. Master cylinder kit change ki 2. Brake pad check kiye 3. Break sensor open karke clean kiya 4. 5-6 baar oil change karke air remove kiya.. Pata nahi probelm solve hoga ya nahi😔
@adeshshinde7147
11 ай бұрын
My front disk is not jammed but still it's heating up, temp is around 40/45 degrees after 20/25km then front brake plates starts to making कीचकीच (kichkich) noise. All the brake assembly is cleaned up,changed brake oil. But still problem persisting. So what is the issue?
@dmcxop1921
5 ай бұрын
Bro you find any solution????
@arindamdutta5520
6 жыл бұрын
Wonderful and clean presentation.
@thesportztourer
6 жыл бұрын
Thanks a lot for the appreciation 😊
@MrBharath97000
6 жыл бұрын
Simply superb
@thesportztourer
6 жыл бұрын
Thanks a lot Bharat Patel 😊
@shajahanshajahan1624
3 жыл бұрын
very good explanation!👍👍👍👍👍
@muralimv2162
7 ай бұрын
Wow it works Broo very happy thank you, love you very much ❤❤❤
@Vivek1991June
5 жыл бұрын
Heyyy!! Excellent one!! Can I perform the same for my rear ABS brakes on Dominar 400??
@thesportztourer
5 жыл бұрын
Thanks a lot Vivek! Yes, the process remains the same for ABS equipped motorcycles (including the rear brakes).
@Vivek1991June
5 жыл бұрын
@@thesportztourer cheers . Thnx mate
@adityamohite4412
5 жыл бұрын
Is the same procedure for rear brake also?
@thesportztourer
5 жыл бұрын
Yes, same procedure 😊
@mrfilmora1132
5 жыл бұрын
Amazing video 10/10 helpful exept I don't use the bikes that use fuel
@NikhilKumar-om2zh
3 жыл бұрын
bro, is the procedure the same for abs variant?
@imtech55
5 жыл бұрын
And how about rear disc brake? My apache rtr 4v's rear disc brake isnt working as it was working when the bike was new...and its been just 3 months since i purchased the bike...how do i solve it? I feel the rear brakes and not at all powerful enough anymore
@akshayv8305
6 жыл бұрын
Wow .doing a great job .and one problem while driving my rtr 160 i am hearing a squeak sound from the front as the mechanic had removed the dust in the disc pad using blower but stil the sound is coming please tell me what to do
@thesportztourer
6 жыл бұрын
Hi Akshay Deepak, blowing air will just remove brake pad dust & nothing else. You can try to pressure wash the disc & caliper. Best is brake cleaner, I have one do you want a video on that?
@rohit101989
6 жыл бұрын
The Sportztourer That would be great as my RTR 200 front brakes also squeak.
@thesportztourer
6 жыл бұрын
Ok 👍 it will be done soon 😊
@rohit101989
6 жыл бұрын
Thanks man! Your videos are excellent, to the point and a real help to us motorcycle lovers out there, especially ones having an RTR. Keep up the good work :D
@akshayv8305
6 жыл бұрын
The Sportztourer bro i have already given to the mechanic and he cleaned .still now that squeak sound is coming im really fed up with my bike 😑
@adhils9633
2 ай бұрын
I changed my motorcycle brake pads.. .i opened the reservoir before pushing back the piston.. And then closed it.. Now the brake bite is gone.. it feels like there's no brake at all.. Should i bleed..or is it because of new pads?
@inspiring_stories_mal
3 жыл бұрын
I tried this method in my old bike and initially it worked later when i changed the caliper o rigns and done this method it is taking me forever to fix this. Already spent 100ml of brake fluid for this.
@DrDre-sy2kv
5 жыл бұрын
bhai matlab khatrnak kaam kare ho. mast.
@thesportztourer
5 жыл бұрын
Thank you so much!!
@vinodshaw4763
Жыл бұрын
What to do when scratches is disc plate? It may be repaired or needed to replace
@TechnicalBaatein2017
4 жыл бұрын
Same process is also for rear disc brake?
@nurvousenergy7268
3 жыл бұрын
Bro can i use dot 5.1 break oil instead of Dot 4 ? & How can i flush break caliiper?
@malaypangtey
6 жыл бұрын
I have an apache rtr 200 , Oct 2016 model, done just 4300 km. I am not getting enough feedback from my front disc and the bite is totally vanished. Should I consider changing the disc pads. If yes then should I go for stock or after market ones.
@thesportztourer
6 жыл бұрын
Hi Malay, 4300km is a bit early for the brake pads to wear out. Check out this video where I have shown how to inspect the brake pads for wear: kzitem.info/news/bejne/zXio3JuIgV9nf3Y
@mujtabakhan1117
4 жыл бұрын
Really great information and professional content.
@shreyasa1271
6 жыл бұрын
very nice, but you have used dot 4 on the reservoir instead of dot 3. since the bleeding done was incomplete. You need to bleed till you see the dot 4 fluid coming out.
@thesportztourer
6 жыл бұрын
Hi Shreyas, You are right if we are considering DOT 5 brake fluid, otherwise you can always mix DOT 3 with higher standard DOT 4 as DOT 3, 4 & 5.1 all are glycol base fluids which are totally soluble & retain their properties of non compressibility & heat resistance when mixed. However DOT 5 silicon based brake fluid is non compatible with these brake oils. Again I would agree with you on totally flushing out the old brake oil as brake oils have there wet & dry boiling point which can reduce the performance of new brake oil. My brake oil was almost new & my problem was different (air in the system) so I decided to top up, which is perfectly fine. I will try to come up with video on completely flushing & maintainance of the calipers very soon. Thanks for your input as it will help many riders reading the comment section 👍
@shreyasa1271
6 жыл бұрын
if the fluid in the reservoir is new then its not a problem i guess.. All the best mate !
@dhananjayjadhav129
6 жыл бұрын
Awesome.....This video is very helpful🙏🙏🙏👍
@thesportztourer
6 жыл бұрын
Thanks for the awesome comment Dhananjay 😊
@dhananjayjadhav129
6 жыл бұрын
Ur welcome😊
@hiteshadhikari
3 жыл бұрын
Bhai how much brake fluid is required to bleed both front and rear and completely swap brake fluid for RTR 200?
@DestinationRides
6 жыл бұрын
Great informative video once again.. Thankss..!
@thesportztourer
6 жыл бұрын
Thanks a lot Destination Rides for always appreciating & motivating the channel 😊
@adityagharmalkar6736
6 жыл бұрын
Any news on whether we can add the abs setup of new RTR 200 abs version on older RTR 200s?
@thesportztourer
6 жыл бұрын
Hi Aditya, Its a very expensive process plus TVS won't be liable for any warranty on the motorcycle. I have asked the service center and there are no recent plans from TVS to retro fit the ABS in non ABS models (no training provided to them).
@vincentpratik5567
6 жыл бұрын
wow....very well explained !!
@MANVIRSINGH1313
4 жыл бұрын
Great video with useful & presentable content. Keep it up bro
@thesportztourer
4 жыл бұрын
Thanks a lot for always valuing the content on the channel. Motivated 😊
@muriga_comedy
Жыл бұрын
Thankyou, very helpful 👍
@manuks123
5 жыл бұрын
Please make a video for rear disc brake also
@vinaysmsagar
5 жыл бұрын
Really appreciate your work. I just pressed subscribe button n like
@thesportztourer
5 жыл бұрын
Thanks a lot! Subscription is a big motivation to make more such videos 😊
@prathamchaurasia8672
3 жыл бұрын
Is this method same for rear brakes of apache ?
@HarjinderSingh-uh1xn
4 жыл бұрын
Good job sir👍👍👍👍
@m.smanoj4688
5 жыл бұрын
Awesome explanation
@aaronlazarus3828
3 жыл бұрын
I opened my front brake fuild box just to check the brake fluid and when I closed it I've noticed a tiny bubble inside through the measure hole on the box. Is that tiny bubble a problem? (Apache 160 4v) There's no issue with brake performance though.
@thesportztourer
3 жыл бұрын
That should be fine 👍
@lifeinthecosmos90
Жыл бұрын
Can spongy break also be caused by new spring pads?
@friendonymous
Жыл бұрын
you missed the part where you have to close the bleeding valve guys please do that😂😂
@harinandaboro8518
4 жыл бұрын
Please make 1 video on poor braking on Apache.
@BR09Biker
6 жыл бұрын
Aur bhaiya yee v batey ki front break loose kaise hoga
@iTekLab
4 жыл бұрын
Hows waxpool brake fluid?
@SilvercityRider1000
6 жыл бұрын
Very helpful video great one. Go a head brother.....
@thesportztourer
6 жыл бұрын
Thanks a lot Swarup for the motivating comment 👍 Hope you are enjoying your white beast.
@SilvercityRider1000
6 жыл бұрын
The Sportztourer Thank u bhai apka comments mujhe bhi motivation deta hai apko main follow kar raha hnu , I wish app or bhi age badh te ra hain may God help u
@showkatmajeed2349
5 жыл бұрын
Pls make video on how to adjust chain setting n tyre adjustment in rtr 200
@sandipdhibar7213
4 жыл бұрын
Thanks for your suggestion
@sakethramreddy7077
4 жыл бұрын
Any way to disable cbs in hornet ? Front brake is not progressive and lever is bit hard
@ForeignExchangeTrader
2 жыл бұрын
I followed the steps but the brake lever is loosened. Its not firm anymore. It was firm before but now not firm anymore. What should I do ?
@_RashedRehman
6 жыл бұрын
for which purpose i should do it in my bike?
@rojerrebeiro9518
3 жыл бұрын
You are too good brother ❤
@thesportztourer
3 жыл бұрын
Thank you so much for the kind words, happy to have you on the channel 😊
@niteshoraon8023
6 жыл бұрын
Thats is real nice video ......
@thesportztourer
6 жыл бұрын
Thanks Nitesh 😊 Do check out the channel you will find a lot of similar stuff.
@nirmalkumar6917
5 жыл бұрын
Please do for rear disc brake also bro... Please!
@shivambandral8625
6 жыл бұрын
Good job sir
@dhirenpatel7670
6 жыл бұрын
Awesome keep it up
@thesportztourer
6 жыл бұрын
Thanks Dhiren Patel 😊
@samriddhatuladhar3913
6 жыл бұрын
is it okay to mix red brake fluid with clear brake fluid?
@thesportztourer
6 жыл бұрын
Hi Samriddha, We need to know the type of brake oil. DOT 3, DOT 4 and DOT 5.1 can be mixed with each other. DOT 5 is the odd one as it cannot be mixed with anyone of the above.
@BR09Biker
6 жыл бұрын
Krney k baad 2-3 km k baad phir ussi tareh ho jata h bhaiya Aisa qun hota h plzz bataey aur kees tareh karu aap plz bataoo
@thesportztourer
6 жыл бұрын
Hi Kamal, Aap k sabhi comment read kiye aur aap k problem k reasons yeh ho sakte hai: 1. Abhi bhi system mein air hai 2. Master cylinder mein problem hai. 3. Check the caliper, brake pad and disc. Agar Disc plate or koi oil/grease/dirt deposit hai toh with bhi brake ko spongy kar sakta hai.
Пікірлер: 259