This video mainly focuses on the specific content of TD158 operation method. This video is divided into 5 parts. The first part is about the method of setting host IDs. The second part is to set the pager ID settings. The third part is the operation setting of the pager reminder duration. The fourth part is about setting the beep mode of the pager. The last part is about the setting of the pager vibration switch.
For the setting the main host ID, you should press the setting button to enter the "F1"state, then you can set the ID. The number you can randomly choose from 1 to 999. There is a piece of information you need note: every time the host ID is changed, you need to pair the pagers with the host (keypads) again. If several keypads call the same pager at the same time, setting the several keypads to the same ID is ok.
For the setting the pager ID, press the setting button to enter the “F1”,then press the plus button to "F2", you can choose the number from 1 to 999. In the charging state, input the number in the keypad, then pick up a pager from the charging base, you should press the confirm button within 3 seconds. When you hear the beeping sound and see the indicator light flash,it succeed.
For the reminder duration setting, the default time is 30 seconds. You can set the range from 0 to 200 seconds. Like the setting steps above, enter the "F3", input the setting reminding time, press the confirm button within 3 seconds. After succeeding, the pager will beep and flash to remind you. When the time is set to 0 seconds, the reminder will always continue.
For the buzzing mode setting, you need to learn the meaning of different numbers. "0" means "shutdown", "1" means slow speed, "2"means medium speed, "3"means fast speed. Enter the "F4" by the setting button and plus button, pick up the pager from the charging base and set it within 3seconds. If the pager beeps and flashs, the setting is succeed. The default mode is medium speed. When the beep mode is turned off, the reminder method is vibrated and flashed.
About the vibration switch setting, the corresponding setting is "F5". Entering the "F5" mode step is similar to the above. Then input the number "0" or "1" from the keyboard. Where "0" means turning off vibration and "1" means turning on the vibration. Before all setting are made, the pager needs to be on the charging base.
The above content is about the specific operation and setting methods of TD158 wireless paging system. Of course, if you want to learn more about this product, you can click the link here: bit.ly/3Va5ZnG to learn more.
Web: www.retekess.com
Email: support@retekess.com
WhatsApp: +86 15639073051
Негізгі бет how to set the TD158 wireless pager system
Пікірлер