To Whom May Meet the Same "Analog-Digital-Synchronization" Issue: (1)On "Timekeeping" mode, long press "ADJUST" button untill second beeping heard and the digital screen shows blinking "SEC 00", this section is to conduct the adjustment of "second hand" by moving it to the figure "12" position, so the screen shows "SEC 00" as indication, short press "LIGHT" or "SEARCH" button once by once to adjust(long press "LIGHT" or "SEARCH" button will just force the second hand to turn a full circle and one more step but do nothing for helping, so just short press "LIGHT" or "SEARCH" button to do the adjustment); (2)After finishing (1), short press "MODE" button once, digital screen shows "0:00", this section is to conduct the adjustment of "hour hand" and "second hand" by moving it to the figure "12" position, so the screen shows "0:00"" as indication, for any hand positions that is far from 0:00, e.g. 5:25, just long press "LIGHT" or "SEARCH" button to force the minute hand to moving, minute hand will then keep moving circle by circle and at the same time, carry the hour hand move too, what you need to do is when both the hour hand and minute hand move close enough to the figure "12", short press either "LIGHT" or "SEARCH" button to stop minute hand moving, then, short press either "LIGHT" or "SEARCH" button once by once to adjust both hour hand and minute hand at exactly the figure "12" position(all adjustment DONE!), short press "ADJUST" button once to go back the "Timekeeping" mode, then all three hands will move and show exactly the time of the digital time. Try it! (==> Conceptually: While you can moving all the three hands to the figure "12" position exactly in 2 adjustment sections, the system will adjust the analog time to match the digital time for you.) //Manual Download ==> < casiofanmag.com/manuals/qw5520.pdf >, within this PDF, page 8(E-71 to E-73).
@vaidehibhatia414
Жыл бұрын
Thank you so much. The new year kinda f’ed up for some reason. Your comment was a lifesaver
@alonafideli887
3 жыл бұрын
Thanks for the tutorial very clear and easy to follow😊
@vagnerantonio3501
Жыл бұрын
O meu é um Casio a 168 prata muito lindo diferente desse modelo aí
@maryann4834
3 жыл бұрын
Thank you.Very Helpful❤️
@malcolmrodger3266
5 жыл бұрын
thank you I can now use my watch!
@nuruljamil5600
3 жыл бұрын
Very helpful. Thank you.. 😊
@smileyboi9174
5 жыл бұрын
thanks man, great video
@sur4964
Жыл бұрын
Very helpful
@shielamariecabonegro9129
3 жыл бұрын
Thank you! 👍🏽
@jelenamugosa7238
4 жыл бұрын
Hello, can you make a video how to turn off alarm indicator? Thank you in advance.
@Nktgupta17
3 жыл бұрын
My watch is blinking R while pressing buttons, why so?? And is this watch support solar charge ?
@hermanfahmi8393
3 жыл бұрын
Thank yooooou
@aditireddy2336
4 жыл бұрын
Thanks u so much..👍
@kulonsiyang9643
5 жыл бұрын
Srry mke sme alarm setting video
@sitifazlinamansor5514
Жыл бұрын
What does R blinking means?
@theonekim351
5 жыл бұрын
Even when I push the bottom for 2 sec the time cannot move!
@lloydsjewellers4221
5 жыл бұрын
Are you in timekeeping mode? To make sure you are press and hold the bottom left button for just over 3 seconds (when you press and hold this button the display should show a flashing HT with two arrow heads pointing to the left). This means when the watch beeps (after 3 seconds) the watch is in timekeeping mode and the time can now be adjusted. Hope this helps
@ritcheladayinlifehungary
3 жыл бұрын
my watch show hs how to change it thank you
@dagent000
2 жыл бұрын
To Whom May Meet the Same "Analog-Digital-Synchronization" Issue: (1)On "Timekeeping" mode, long press "ADJUST" button untill second beeping heard and the digital screen shows blinking "SEC 00", this section is to conduct the adjustment of "second hand" by moving it to the figure "12" position, so the screen shows "SEC 00" as indication, short press "LIGHT" or "SEARCH" button once by once to adjust(long press "LIGHT" or "SEARCH" button will just force the second hand to turn a full circle and one more step but do nothing for helping, so just short press "LIGHT" or "SEARCH" button to do the adjustment); (2)After finishing (1), short press "MODE" button once, digital screen shows "0:00", this section is to conduct the adjustment of "hour hand" and "second hand" by moving it to the figure "12" position, so the screen shows "0:00"" as indication, for any hand positions that is far from 0:00, e.g. 5:25, just long press "LIGHT" or "SEARCH" button to force the minute hand to moving, minute hand will then keep moving circle by circle and at the same time, carry the hour hand move too, what you need to do is when both the hour hand and minute hand move close enough to the figure "12", short press either "LIGHT" or "SEARCH" button to stop minute hand moving, then, short press either "LIGHT" or "SEARCH" button once by once to adjust both hour hand and minute hand at exactly the figure "12" position(all adjustment DONE!), short press "ADJUST" button once to go back the "Timekeeping" mode, then all three hands will move and show exactly the time of the digital time. Try it! (==> Conceptually: While you can moving all the three hands to the figure "12" position exactly in 2 adjustment sections, the system will adjust the analog time to match the digital time for you.)
@dagent000
2 жыл бұрын
@@ritcheladayinlifehungary To Whom May Meet the Same "Analog-Digital-Synchronization" Issue: (1)On "Timekeeping" mode, long press "ADJUST" button untill second beeping heard and the digital screen shows blinking "SEC 00", this section is to conduct the adjustment of "second hand" by moving it to the figure "12" position, so the screen shows "SEC 00" as indication, short press "LIGHT" or "SEARCH" button once by once to adjust(long press "LIGHT" or "SEARCH" button will just force the second hand to turn a full circle and one more step but do nothing for helping, so just short press "LIGHT" or "SEARCH" button to do the adjustment); (2)After finishing (1), short press "MODE" button once, digital screen shows "0:00", this section is to conduct the adjustment of "hour hand" and "second hand" by moving it to the figure "12" position, so the screen shows "0:00"" as indication, for any hand positions that is far from 0:00, e.g. 5:25, just long press "LIGHT" or "SEARCH" button to force the minute hand to moving, minute hand will then keep moving circle by circle and at the same time, carry the hour hand move too, what you need to do is when both the hour hand and minute hand move close enough to the figure "12", short press either "LIGHT" or "SEARCH" button to stop minute hand moving, then, short press either "LIGHT" or "SEARCH" button once by once to adjust both hour hand and minute hand at exactly the figure "12" position(all adjustment DONE!), short press "ADJUST" button once to go back the "Timekeeping" mode, then all three hands will move and show exactly the time of the digital time. Try it! (==> Conceptually: While you can moving all the three hands to the figure "12" position exactly in 2 adjustment sections, the system will adjust the analog time to match the digital time for you.)
@sunpark9106
5 жыл бұрын
its not working :(
@Njalkanen
4 жыл бұрын
Why ... sad face
@siaksut
4 жыл бұрын
my battery is dead.. where to have battery replacement here in manila
@lloydsjewellers4221
4 жыл бұрын
I don't know Manila, If you took it to a good jewellers in your area im sure they would be able to replace the battery. This links is a search for casio in Manila. Hope it helps :) www.google.com/search?q=casio+in+manila&oq=casio+in+manila&aqs=chrome..69i57j0l7.5321j0j7&sourceid=chrome&ie=UTF-8
@johnfernandoladera1762
3 жыл бұрын
Please help me with my watch, i set the correct time in digital but my analog is different.
@xxd3adclarenxx291
3 жыл бұрын
My watch is baby g 130 type help me when u find the answer or know how to change the arms
@lloydsjewellers4221
3 жыл бұрын
Hi, if the hands show a different time to the digital display I would calibrate the hands as described in the adjusting the hands part of the manual (page E-71). If you don't have the manual here is the link to the manual casiofanmag.com/manuals/qw5520.pdf . Hope it helps :-)
@lloydsjewellers4221
3 жыл бұрын
@@xxd3adclarenxx291 I have checked online and here is a link to a website that has a zip file of the manual for the g-130 watch. Hope it helps :-)
@xxd3adclarenxx291
3 жыл бұрын
Lloyds Jewellers Thank you i fixed it
@thepoorprince3494
3 жыл бұрын
you need to set the arms to 12:00 first. I press ADJUST until it shows seconds, then MODE to adjust arm to default 12:00 using SEARCH & LIGHT. Press ADJUST to set.
@kulonsiyang9643
5 жыл бұрын
How to set alarm..make some femo alatm
@naurr5552
4 жыл бұрын
How to set AM PM?
@lloydsjewellers4221
4 жыл бұрын
Hi, if you look at the pages E-18-E20 regarding setting up the digital time it shows a P to the left of the time for PM. I for one use the 24hr clock as its easier to setup the time. Here is the pdf for the watch direct from CASIO support.casio.com/storage/en/manual/pdf/EN/009/qw5520.pdf Hope it helps
@antoniolabad3359
Жыл бұрын
Lástima que no habla español
@igedemahendradarmawiguna9558
5 жыл бұрын
how to set analog time?
@lloydsjewellers4221
5 жыл бұрын
You adjust the digital time in the display and then the watch adjusts the hands (the analogue time) to the digital time. Hope this helps
@christinevaliente3094
3 жыл бұрын
@@lloydsjewellers4221 what if they are not synced. Even if I have set the digital time it is not synced with the analog time.
@imupadhyay
3 жыл бұрын
@@christinevaliente3094 I am facing the same issue. Did you find any solution?
@dagent000
2 жыл бұрын
@@christinevaliente3094 To Whom May Meet the Same "Analog-Digital-Synchronization" Issue: (1)On "Timekeeping" mode, long press "ADJUST" button untill second beeping heard and the digital screen shows blinking "SEC 00", this section is to conduct the adjustment of "second hand" by moving it to the figure "12" position, so the screen shows "SEC 00" as indication, short press "LIGHT" or "SEARCH" button once by once to adjust(long press "LIGHT" or "SEARCH" button will just force the second hand to turn a full circle and one more step but do nothing for helping, so just short press "LIGHT" or "SEARCH" button to do the adjustment); (2)After finishing (1), short press "MODE" button once, digital screen shows "0:00", this section is to conduct the adjustment of "hour hand" and "second hand" by moving it to the figure "12" position, so the screen shows "0:00"" as indication, for any hand positions that is far from 0:00, e.g. 5:25, just long press "LIGHT" or "SEARCH" button to force the minute hand to moving, minute hand will then keep moving circle by circle and at the same time, carry the hour hand move too, what you need to do is when both the hour hand and minute hand move close enough to the figure "12", short press either "LIGHT" or "SEARCH" button to stop minute hand moving, then, short press either "LIGHT" or "SEARCH" button once by once to adjust both hour hand and minute hand at exactly the figure "12" position(all adjustment DONE!), short press "ADJUST" button once to go back the "Timekeeping" mode, then all three hands will move and show exactly the time of the digital time. Try it! (==> Conceptually: While you can moving all the three hands to the figure "12" position exactly in 2 adjustment sections, the system will adjust the analog time to match the digital time for you.)
@dagent000
2 жыл бұрын
@@imupadhyay To Whom May Meet the Same "Analog-Digital-Synchronization" Issue: (1)On "Timekeeping" mode, long press "ADJUST" button untill second beeping heard and the digital screen shows blinking "SEC 00", this section is to conduct the adjustment of "second hand" by moving it to the figure "12" position, so the screen shows "SEC 00" as indication, short press "LIGHT" or "SEARCH" button once by once to adjust(long press "LIGHT" or "SEARCH" button will just force the second hand to turn a full circle and one more step but do nothing for helping, so just short press "LIGHT" or "SEARCH" button to do the adjustment); (2)After finishing (1), short press "MODE" button once, digital screen shows "0:00", this section is to conduct the adjustment of "hour hand" and "second hand" by moving it to the figure "12" position, so the screen shows "0:00"" as indication, for any hand positions that is far from 0:00, e.g. 5:25, just long press "LIGHT" or "SEARCH" button to force the minute hand to moving, minute hand will then keep moving circle by circle and at the same time, carry the hour hand move too, what you need to do is when both the hour hand and minute hand move close enough to the figure "12", short press either "LIGHT" or "SEARCH" button to stop minute hand moving, then, short press either "LIGHT" or "SEARCH" button once by once to adjust both hour hand and minute hand at exactly the figure "12" position(all adjustment DONE!), short press "ADJUST" button once to go back the "Timekeeping" mode, then all three hands will move and show exactly the time of the digital time. Try it! (==> Conceptually: While you can moving all the three hands to the figure "12" position exactly in 2 adjustment sections, the system will adjust the analog time to match the digital time for you.)
Пікірлер: 47