Yes!!! You made the bloopers just for me!!! 😂😂😂 Best part is, I don’t have to make this tutorial for my students!!! Thanks Rode!!! 😊
@rodemic
9 ай бұрын
It was just for you, Mr. Heng!
@m_saqibali
9 ай бұрын
High quality tutorials like these are so useful! Need more for using the Streamer X with OBS
@rodemic
9 ай бұрын
Thanks for the feedback @m_saqibali! We would love to create more content about the Streamer X and OBS. We'll pass your suggestion onto the team.
@m_saqibali
9 ай бұрын
@@rodemic I'm looking to use the Streamer X in an unorthodox way, not the conventional gamer setup at home but rather live streaming events - I'm to use a multicam setup also via OBS - the opportunities are endless in this field. The current Shorts tutorials are so-so, need lengthier content for the dummies starting off.
@focuspulling
9 ай бұрын
Hope replacement rectangular windscreens for the Lav II get their own SKU someday; currently they're not replaceable, despite falling off and getting lost rather easily. Thanks Rode!
@EricB03
9 ай бұрын
Agree 100%
@rodemic
9 ай бұрын
Thanks for the suggestion @focuspulling. We're always looking to make our products more enduring by providing accessories, so we'll pass your suggestion onto the team.
@rodemic
9 ай бұрын
Thanks for your feedback @focuspulling about replacement windscreens. We'll let the team know.
@SamoScopom
9 ай бұрын
wait@@rodemic , this isn't a thing? Please start selling all the replacemnt parts - I'm looking to buy this mic but without a way to replace removable parts (shipping worldwide) I'm going to postpone my order of the Wireless Pro kit. Currently I use exclusively the Smartlav/Lavlier Go mics and I have always at least one replacment popfilter on me - I haven't lost any but they do tear of from the rubber collar sooner or later - I don't see it as a manufacturing error, in my mind the popfilter is a consumable - it's basically a foam glued to firm rubber, it will tear sooner or later.
@BasicFilmmaker
9 ай бұрын
LOVE the outtakes! :)
@patricksharpe
9 ай бұрын
I'm so glad it's Heen that starts me off on my Lavalier loop tying journey!
@discopreacha
9 ай бұрын
GREAT tutorial! The bloopers are the best! Thank you for leaving them in!
@motoryachtloon
9 ай бұрын
We love the new Lavs and Wireless pros. We've been using them in all our recent videos. Thanks for showing us this Broadcast loop 🤙
@rodemic
9 ай бұрын
No problem, @motoryachtloon!
@kirillch
9 ай бұрын
The good side of the video - no bright logos everywhere. It is a progress. 👍 And she is gorgeous 🙌
@Soul_Visuals_Photography
9 ай бұрын
so simple yet I needed to see this
@FullFrontalExposure
8 ай бұрын
Just got mine and I love it!
@melankolikfilms
9 ай бұрын
Heen bloopers are back!
@richardsmith9416
9 ай бұрын
Love the bloopers😭
@WupperVideo
9 ай бұрын
You definitely should fix the loose clip problem. We’ve already lost a clip and they cost 15,90 € each + 6,25 € shipping.
@rodemic
9 ай бұрын
Thanks for bringing this up again @WupperVideo! We can see it's something a few of our users have mentioned in this thread. We know reliablility, durability and dependability are all huge factors for Pro users like ours, so the team will see what they can do to support users experiencing these issues. One way that already exists is our warranty program. The Wireless PRO has two years of warranty from RØDE, so if you're experiencing issues with your Lavalier II that aren't due to regular wear and tear, they'll be able to help you out.
@EugenBrinzoiu
9 ай бұрын
Very useful, thank you ❤
@AndrewSmith-ir1ui
9 ай бұрын
Can we just have a video of her bloopers? The look on her face is just priceless. Brings joy to our hearts. (Yeah, we don't need Ryan any more - just saying.)
@rodemic
9 ай бұрын
We won't tell Ryan you said that... 🤐
@Youthman
18 күн бұрын
I have (2) RODE Wireless Pro mics and have already lost (2) mic clips. VERY poor design on the clips. Please fix this ASAP. I just contacted support to order (2) replacements (which should have not fallen off to begin with).
@rodemic
14 күн бұрын
Thanks for the feedback - we'll pass this onto our Product Team! Our Service Team are definitely able to help arrange replacements as needed.
@SamoScopom
9 ай бұрын
I would love to see a tutorial how to hide the mic all togeather, either that or a screwlocking version of the SmarLav/Lavalier GO+ which is compatible with invisilav
@rodemic
9 ай бұрын
Thanks for the feedback @SamoScopom, we'll take that into consideration.
@lisnevskyvideo
9 ай бұрын
Cool. Thanks
@34Media
9 ай бұрын
best tip i got was attaching mic to cap my sound is so much better as no more breathing noise when hiking and heavy breathing .
@rodemic
9 ай бұрын
👌
@christobella
9 ай бұрын
I've gone back to using my Lav Go mics with the Wireless Pro system. Like many doc shooters, I prefer to use Rycote Undercovers to keep the mics out of sight. The Lav II really doesn't work well with them - it's too big, resulting in excessive rubbing sounds, and the rear plastic cover of the mic housing comes off every time you remove the sticky. No problems with the Lav Go, and the sound quality is very similar.
@rodemic
9 ай бұрын
Thanks for the feedback on the Lavalier II, @christobella. We'll take it into account.
@SamoScopom
9 ай бұрын
aren't you afraid of accidental disconnects?
@christobella
9 ай бұрын
@@SamoScopom No. It's happened maybe 2 or 3 times after hundreds of shoots with the WGii, and I'm always monitoring the audio on headphones. It's a quick fix. I can see how your question would be relevant to a wedding shooter for example.
@SamoScopom
9 ай бұрын
@@christobella unless you are shooting documentary and don't want to intervene a flow of consciousness, or you are recording somebody giving a speech. Probably one needs to carry both types
@justinjwood
8 ай бұрын
Now show us how to set it up as a hidden mic for a narrative shoot and comparison of why this is better then a Lavalier Go
@rodemic
8 ай бұрын
Hey there Justin, the Lavalier II offers key advantages over the Lavalier GO, including a more discreet design, superior sound quality for professional applications, a secure 3.5mm TRS locking connector, and a comprehensive accessory kit for enhanced versatility in various recording scenarios. This makes the Lavalier II particularly suitable for demanding broadcast and filmmaking environments. To learn how you might set it up as a hidden mic for a narrative shoot, we encourage you to look on KZitem or even in our favorite Facebook group, called "Lavalier mic hiding techniques". Good luck!
@ryt-is
9 ай бұрын
Could you make a tutorial on EQing this mic so it doesn't sound so muddy?
@GUTTAANDSAINT
7 ай бұрын
I followed the directions to T and I still can’t get it to sound as good as she got hers
@trommyx
8 ай бұрын
Hello Rode, I really like that jacket the sister has, how did I get it if I need it? please
@rodemic
8 ай бұрын
You can find it at store.rode.com 👀
@trommyx
8 ай бұрын
@@rodemic WOW THANK YOU
@iry_media8846
9 ай бұрын
I’ve been having bad experiences with this lavalier design 1. The windscreen window came off when stuck to tape when attempting to pic up a subject 2. The lavalier clip prongs broke, making the fit on the wire loose I’m a huge fan of rode products but it seems like they half assed the features on the wireless pro and their accessories when rushing it out
@rodemic
9 ай бұрын
Sorry to hear you've been having a poor experience with your Lavalier II, @iry_media8846. We'll let the team know about your feedback.
@GailClifford
7 ай бұрын
I appreciate you getting me further then I was ... but what is the "transmitter" on the other side? There's nothing like it in the box I received
@rodemic
7 ай бұрын
Good question! That's the transmitter of the Wireless PRO, which is a separate product. If you have your own device you're connecting your Lavalier II to, it's not needed!
@johnnyweissmuller5838
8 ай бұрын
Could you release a pro system without lavs, charging case and only one transmitter? I think many would buy it!
@rodemic
8 ай бұрын
Thanks for the feedback @johnnyweissmuller5838! We appreciate the suggestion.
@noimdaveman
9 ай бұрын
That locking nut is the worst, I lost it on one of them after 2 uses.
@rodemic
9 ай бұрын
Sorry to hear that @noimdaveman. We'll pass your feedback about the Lavalier II's locking mechanism onto the team.
@marzvrover
9 ай бұрын
can you do a video on how best to pack the Rode Wireless Pro accessories to not damage the lav mics
@rodemic
9 ай бұрын
We recommend using the included case- if you want to keep them tidy you could even use a small velcro cable tie. Let us know if you have any further questions!
@_burd
5 ай бұрын
The larger diaphragm lav is certainly a good idea /theoretically/ but with the capsule oriented 90 degrees to the wire ,the mic is now single sided. Meaning the capsule faces right into the tape triangle/dedicated mount/fabric when hiding the lav (which is half of the purpose for such a small mic!). It has basically relegated the 'better' capsule to external mounting only, which is a real disappointment on professional sets. You should have just focused on making a higher quality, on axis capsule design. Will there be a redesigned invisilav mount to suit this unit?
@rodemic
5 ай бұрын
Hey there @_burd, thanks for the feedback on the Lavalier II design - we'll pass the suggestion for an invisilav for the Lavalier II onto the team as well.
@_burd
4 ай бұрын
@@rodemic Appreciate it! If you use polycarbonate etc rather than silicone it would solve the adhesive issue :) While you're here, is is possible to send the Rx's timecode signal over USB-C (using a USB-C to DIN/BNC cable) so that you can keep a continuous TC sync and also be able to output two channels from the Wireless pro? At the minute it's a little awkward that you have to decide between 2 channel audio and only being able to jam sync or only 1 channel audio to be able to get continuous TC (if I'm reading the manual right 😅). Professional cameras like Sony FX and Canon C series already run dedicated TC and 3.5mm ports so it would make sense that the pro version accommodated both :)
@_burd
4 ай бұрын
Alternatively, if the Rx 3.5mm port does actually have 3 channels (as it's TRRS) could a cable that splits 3.5mm TRRS into 3.5 TRS and USB-C let you do that all from the one port? I know a company like Alvin's Cables could sort out the cable side of things if RODE can solve the firmware solution! That would place the wireless pro clearly ahead of both DJI and Tentacle in one firmware update ;)
@Essaiface1
7 ай бұрын
Thanks for the tip ! Where can we buy spare clips for the Lavalier II?
@rodemic
6 ай бұрын
Hey there, we don't sell them, but if yours have broken your best bet would be to contact our service team here: rode.com/en/support/contact
@Essaiface1
6 ай бұрын
Thanks for your answer. So the only option is to replace the entire mic, just for the lost or broken detachable clip ! This is neither fair for the customer nor sustainable for the environment. Rode communicates as a brand of the future and behaves as one of the worst past. Disappointing.
@SuzoSenpai
3 күн бұрын
Is there a way to secure the mini furry onto the lav mic? It slips right on and off with no effort. I’ve had several situations where it pops off real easily.
@rodemic
3 күн бұрын
Sorry to hear that! I'd recommend reaching out to our Support Team regarding this, they will be able to provide you with more information regarding this - help.rode.com/hc/en-us/requests/new
@AbgSyuk
9 ай бұрын
i want that jacket
@rodemic
9 ай бұрын
store.rode.com 👀
@Krakenborn
9 ай бұрын
And, please make a special concealer made by Rode for this Pro Lavalier. None of current pro concealers on the market right now fit this one.
@rodemic
9 ай бұрын
Thanks for the feedback @Krakenborn- we are always looking to provide accessories to allow our users to get the best use out of their Lavalier mics, so we'll pass it onto the team.
@catchbay
9 ай бұрын
The eternal question, up or down.
@mrstewart7435
6 ай бұрын
do you guys sell replacement clips for the lavalier ii or can you recommend where i can find some, i lost my clip. I would appreciate your help, thank you
@rodemic
6 ай бұрын
Hey there Mr. Stewart, we'd recommend reaching out to our support team here for all your questions relating to spare parts as they may be able to help you out: rode.com/en/support/contact
@benjhaisch
9 ай бұрын
The real question is: how can I get that jacket???
@rodemic
9 ай бұрын
You can find all of our apparel here: store.rode.com/
@poplogic17
9 ай бұрын
I need that jacket. Like, now.
@rodemic
9 ай бұрын
store.rode.com 🙌
@poplogic17
9 ай бұрын
@@rodemic Her jacket isn't there! No fair! 😥
@gibranrgarcia
3 ай бұрын
Where can I buy the Mic Clip only for the Lav II?
@rodemic
3 ай бұрын
We'd suggest touching base with our Service Team - they'll be able to help you out: rode.com/contact
@buriedinadream
3 ай бұрын
Is there a preferred way to hide the lavalier II? I haven’t found any good info on this.
@rodemic
3 ай бұрын
Depends on what you're trying to record and the look you need to achieve - the broadcast loop is the most common and professional setup for this lavalier
@buriedinadream
2 ай бұрын
My question was more about concealing the mic completely. For scenarios where you wouldn’t want to see the mic at all. With the front facing nature of the mic, i notice most lav concealing techniques are for top facing mics.
@LoverOfTech
9 ай бұрын
Is there an invisilav system for this?
@rodemic
9 ай бұрын
Not at this time! But thank you for the suggestion- we'll pass it onto the team.
@adan_laface
9 ай бұрын
When am I gonna find these mics at Best Buy?
@rodemic
9 ай бұрын
You'll have to ask our friends over at Best Buy about that! 🤠
@MrYousif07
5 ай бұрын
Can i use lavalier 2 directly into my pc ?
@rodemic
5 ай бұрын
You won't be able to do that, @MrYousif07, but if you use your Lavalier II with your RØDE Wireless PRO you can connect your Wireless PRO to your computer using the included USB cable.
@gerardobello1747
9 ай бұрын
I was wondering how to set it up because mine didn’t come with the clip (holder). 😢
@rodemic
9 ай бұрын
Sorry to hear that, @gerardobello1747! Please get in contact with our support team here about this: rode.com/en/support/contact
@mstudiofilmowe
5 ай бұрын
Mic capsule against body or in to body?
@rodemic
5 ай бұрын
The Lavalier II has a flat, low-profile design with an omnidirectional pickup pattern - you will just need to make sure the side with the small perforated grille is facing outward to ensure you have great sound!
@mstudiofilmowe
5 ай бұрын
@@rodemic What if I want to hide it under a shirt or under suit jacket flap for groom? How should I face mic capsule?
@cyberdefenseddi
9 ай бұрын
❤️🙌
@ArgoFowl
9 ай бұрын
is this the same lav that came with my wireless pro system?
@anderspuck
9 ай бұрын
Yes
@rodemic
9 ай бұрын
Yep.
@ItzrealMusic
9 ай бұрын
First commenter I see you guys 💪🏾
@rodemic
9 ай бұрын
Congrats! Here's your trophy: 🏆
@AndrewSmith-ir1ui
9 ай бұрын
@@rodemic ROFL!
@newspete
9 ай бұрын
Great mic... Rubbish lav holder
@rodemic
9 ай бұрын
Thanks for the feedback on this, @newspete. We'll let the team know.
@WupperVideo
9 ай бұрын
@@rodemicespecially when you need to spend over 22 € for the spare mic clip
@liamgoodvisuals
9 ай бұрын
Can confirm. I purchased this product and it sounds good, but I’ve never been able to use it in a professional context considering it can just fall off or become detached at any point.
@HouseofRen
9 ай бұрын
In the design is night so tight on the clip. I use super glue unfortunately
@rodemic
9 ай бұрын
Sorry you have to use super glue with your Lavalier II, @HouseofRen. We'll pass your feedback onto the team.
@vminator
9 ай бұрын
That clip keeps breaking and now you wont send me any.
@rodemic
9 ай бұрын
Thanks for your feedback @m_saqibali! We would love to create more content about the Streamer X and OBS. Will pass it onto the team.
@geraudtruel7189
9 ай бұрын
As many people said, I'm not an huge fan of this lavalier design. The lock is very easy to lose and only work on one side. If you screw it on the wrong side, there is no connection... The mic holder is a little bit flimsy and I had to put a black tape on the rode logo.... How is it still possible to make this logo so visible. This is totally unprofessional. And last but not least, there is no way to properly make it invisible. The design of the capsule make it very hard to put it underclothes. There is now invisilav for it. You need to find a way to make an invisilav for the Lavalier II !
@rodemic
9 ай бұрын
Thanks for the feedback about the Lavalier II, @geraudtruel7189 - we'll pass it onto the team.
@BoomingVisuals
9 ай бұрын
Them things still fall off all the time. This lav clip is the worst design ever. We need a replacement metal clip asap..
@shimonweinstock9098
9 ай бұрын
🤚🦶😕
@stephenhopes634
9 ай бұрын
Not an ideal mic for hiding under clothing… thoughts?
Пікірлер: 114