For all guys struggling with OMSI 2 pedals - use the automatical configuration that is in the controller settings
@realbboi
2 жыл бұрын
i tried that and it did not work. its weird because the game recognizes and sets up the pedals but they wont do anything when im in the bus.
@nairamdiam
2 жыл бұрын
@@realbboi have you turned on the steering wheel controling in the settings while being in the bus?
@turbo-y7h
Жыл бұрын
@@realbboi Exactly the same thing happens to me, aa trash game has a configuration that seems to be from the year 1990 and it doesn't even work well
@Misiek_G_Sz
4 ай бұрын
i have a problem with the g hub, it only detects the steering wheel, i have everything connected
@Nebs1
3 жыл бұрын
Anyone know how to separate the throttle and brake? When combined as one pedal it works fine, separating them as 2 pedals nothing works.
@Martin_V8
Жыл бұрын
And me, just started playing it again and there’s nothing more annoying than Lyft in your foot off the photo on the bus to Brake. I can’t seem to get them to work separately.
@reddythalla
11 ай бұрын
For throttle set the Trait to progressive and brakes select degressive, hard way to find this out, hope this helps.
@426moparhemi
3 жыл бұрын
It’s reading everything but when I try to accelerate or brake it doesn’t do anything
@darthintroductions9315
Жыл бұрын
I’ve done everything correctly but it’s still not working 😕
@miguelix9585
8 ай бұрын
Why in my buttons list of doesn't appear nothing?
@itsmajkoshake1739
3 жыл бұрын
hi my pedals (accelerator and brake) didnt work in omsi 2 can you help me pls?
@lazarilic321
3 жыл бұрын
I set all that and when I realise the thortle he is braking if i put in reverse gas is automatically start and brake working wtf
@duraab27
2 жыл бұрын
When I followed this tutorial, I've noticed my brakes are stuck on 1.000 (without touching it) and my accelerator doesn't respond, but only my clutch pedals respond to any change. Why is this the case.
@WeendyBSS
6 ай бұрын
When i enter the game, the steering wheel cancels itself, and when i go back in the settings it says its not active
@DaddyVanHool
3 жыл бұрын
My pedal does t work
@TheTransportExplorer
4 жыл бұрын
My bus rolls along when its set how you did it.
@maadswift
4 жыл бұрын
What do you mean mate?
@TheTransportExplorer
4 жыл бұрын
Electro Hazard Gaming basically, if I take me foot off all the pedals with the brake off, it rolls slowly oh flat surfaces
@maadswift
4 жыл бұрын
@@TheTransportExplorer is the bus in drive (D) by any chance?
@itzchazz1
Жыл бұрын
This helped thx sm
@robloxplays7497
10 ай бұрын
I have followed this but my wheel still won’t work
@NotMonke788
7 ай бұрын
hello my Logitech g29 is set up but in the bus in Omsi 2 the bus wheel does not respond and same with the pedals please help
@veronyakviktor1559
6 ай бұрын
Can someone help me how to fully turn off the force feedback?! Because when I hit the curbstone my wheel turns super hard so can anyone help me????
@SchmockD
4 жыл бұрын
My force feedback is maxed everytime in omsi2, i dont know how to fix the issue logitech isnt giving support on not implemented games...
@maadswift
4 жыл бұрын
On the middle right hand side on the controller tab (where you set up your wheel) on omsi there is a slider for how intense the force feedback is.
@Ted_RBLXoff
3 жыл бұрын
when i select CSL in the game controllers all inputs are stuck at 48% and my wheel is turned on + it wont detect input on omsi but every other game it does
@proste_sotous3327
Жыл бұрын
But the game controller setting always crashes the game
@dill0000
3 жыл бұрын
My steering wheel is connected but it says: No connection. can you help me please?
@maadswift
3 жыл бұрын
Make sure the power is on, on the mains
@dill0000
3 жыл бұрын
@@maadswift where can you do that?
@maadswift
3 жыл бұрын
The power lead, the plug you turn on on the wall, is that all working and plugged in
@V3rkticshorts
2 жыл бұрын
hi, When i go to the buttons section with my G20 , I only have the option for 'button 1' then thats the only option available.
@lekkerspellenspelen2903
Жыл бұрын
You have to press all the buttons, then they will show up
@turbo-y7h
Жыл бұрын
I reverse the clutch with the throttle
@843Reboot
Жыл бұрын
all my throttle outputs are inverted, so instead of me throttling to accelerate it accelerates without me throttling but than when i press down on my throttle it stops accelerating.
@EPG2803
10 ай бұрын
You need to press the invert/reverse button when you are setting up your pedals and wheel
@Godleg1
9 ай бұрын
@@EPG2803where?
@EPG2803
9 ай бұрын
@@Godleg1 it’s next to were you say what ones the throttle it should be a box and at the top of the colom it should say invert
@djsullywonder63
2 жыл бұрын
Hi there am using a Trustmaster T150 wheel its not recognising can you help pls?
@leviwestlake875
3 жыл бұрын
When i try to use my throttle and my brakes alone they won't work, but when i do brake/throttle it works how can i fix this?
@Nebs1
3 жыл бұрын
I have the same issue. Everything works perfectly apart from separating the throttle and brake. One pedal driving isn't natural.
@NickMckay1993
4 жыл бұрын
I can’t find the button to turn off inverse
@Wizzky1
2 жыл бұрын
Is it possible to fix sensityvity? Since mine is for some reason really high.
@matthewcooper9445
4 жыл бұрын
My pedals won’t work on Omsi but the steering does
@maadswift
4 жыл бұрын
Disconnect and then reconnect the wheel from g hub and your computer, if it still ain't worked, disable the driver and re enable it again.
@matthewcooper9445
4 жыл бұрын
Electro Hazard Gaming also do I use the default profile or import omsi
@matthewcooper9445
4 жыл бұрын
Electro Hazard Gaming works also on every game apart from omsi
@maadswift
4 жыл бұрын
Have you made sure you've added the wheel into the active controller. 2 white boxes, move from left to right if that makes sense?
@matthewcooper9445
4 жыл бұрын
Electro Hazard Gaming yeah I’ve done everything
@Lipston_94
4 жыл бұрын
The issue I am having with my pedals is that when I press brake, all 3 pedals activate. Also does anyone know if changes done with G hub will transfer over to the Xbox/PS4?
@maadswift
4 жыл бұрын
Uninstall g hub, and then reinstall it that may stop that issue, and no, g hub hub settings will not transfer over to console unfortunately.
@t261785MattHowell
3 жыл бұрын
@@maadswift is there another way of messaging you? I had the GHub installed, and then OMSI lost the settings for my G920.
@maadswift
3 жыл бұрын
Message me on discord Equilibrium.#9082
@maximpfeiffer6382
2 жыл бұрын
My pedals doesnt work
@yhsramthegoat.
2 жыл бұрын
only if you did rigs of rods...
@ainartalts2436
3 жыл бұрын
Help plz. I have g29 and when I end the autoconfig and go in the bus then gas and brake pedals not work. How I can fix this problem
@maadswift
3 жыл бұрын
Firstly make sure the wheel is activated in the input menu, if it's activated make sure that the axis for throttle and brake are on your actual brake and throttle if that makes sense
@ainartalts2436
3 жыл бұрын
@@maadswift In the settings I see the throttle and brake pedals work but in the bus not work. Clutch and steering wheel works
@maadswift
3 жыл бұрын
@@ainartalts2436 have a look in g hub to see if brake and clutch are combined
@ainartalts2436
3 жыл бұрын
@@maadswift Yes. They are not combined
@maadswift
3 жыл бұрын
@@ainartalts2436 reset your bonds them set them again and see if that works
@tarvopajus
4 жыл бұрын
My GHUB wont let me to set parameters myself. They willl go back the way they were.
@maadswift
4 жыл бұрын
Perhaps delete temporary files then try again?
@levigamer2952
4 жыл бұрын
I am having an issue that i open up g hub and then selecting the wheel and i click on the option to set the rotation angle and the sensitivity and g hub does nothing it just stays on the assigments tab.
@marcushalvorsen2383
4 жыл бұрын
Levi Gamer same here and i dont now what to do
@maadswift
4 жыл бұрын
Reinstall g hub, it's a common bug
@levigamer2952
4 жыл бұрын
I have reinstalled it about 3 or 4 times already and it did nothing
@maadswift
4 жыл бұрын
@@levigamer2952try and delete temporary files that may help.
@duraab27
3 жыл бұрын
Hi mate, So when I set my throttle axis normally (same with braking) my bus won't move, but when I set it to throttle/brake, my bus does move. Any explanations why? I have a Logitech G29
@maadswift
3 жыл бұрын
Make sure in the G hub driver the throttle brake isn't combined
@duraab27
3 жыл бұрын
So my stopped working with OMSI 2. Pedals are not combined, and all of my settings are correctly placed. So my question is, why (when on OMSI 2 settings in the game) does my throttle work when it is brake/throttle, yet it doesn't work singularly?
@EPG2803
10 ай бұрын
@@duraab27that’s exactly what’s happening for me, and fair enough it’s ok on throttle break it’s not the best
@duraab27
10 ай бұрын
@@EPG2803 I think updating the software and Windows versions and OMSI helped me to use my Logitech G29 properly. One problem left, most buttons will not work.
@lutN
4 жыл бұрын
The throttle and the brakes work fine but the steering wont do anything, its just stuck on 0%
@maadswift
4 жыл бұрын
Plug the mains power in and turn it on at the plug
@lutN
4 жыл бұрын
@@maadswift Yeah its in, I think its my LGS, Im just changing it to x64, not x86, I'll see how that goes
@maadswift
4 жыл бұрын
@@lutN if you a 64 bit system then yes, if it's a 32 bit system stick with x86
@lutN
4 жыл бұрын
@@maadswift Got it working anyways, Works perfect, especially with the bumps on the road, Thanks for helping a bit
@maadswift
4 жыл бұрын
@@lutN No problem, that's what I'm here for
@Azza.10
3 жыл бұрын
Can you play with automatic gears while using the wheel?
@maadswift
3 жыл бұрын
Ets 2 you can set up using the shifter, on omsi, you can only have a h pattern on the shifter and have to set up d,n,r on separate buttons, I have it on the 3 buttons at the bottom (share home options)
@NickMckay1993
4 жыл бұрын
Help !!! When I turning left on the steering wheel the bus turns right any ideas ?
@maadswift
4 жыл бұрын
Make sure in the controller menu that inverse input is turned off.
@NickMckay1993
4 жыл бұрын
Electro Hazard Gaming where about is that dude ? I can’t see it
@maadswift
4 жыл бұрын
It's next to the blue and white bar with the percentage in the middle
@k.sandor_d
4 жыл бұрын
My pedals work only combinated, because when i set the brake and throttle for another axis, the bus always brake and when i press the throttle the bus's pedal dont moving. Have you any idea to fix it?
@maadswift
4 жыл бұрын
Have you made sure that the axis is set to be inverted?
@k.sandor_d
4 жыл бұрын
Yeah, I cheked it. But it doesn't work.
@maadswift
4 жыл бұрын
Try deleting the g hub software, install it again and reconfigure it.
@k.sandor_d
4 жыл бұрын
@@maadswift ok, I will try it. Thanks
@k.sandor_d
4 жыл бұрын
@@maadswift Sadly, it didn't fix my problem, but thanks
@rudifrew4098
4 жыл бұрын
My pedals and steering are all stuck on 0%
@maadswift
4 жыл бұрын
Reset g hub, then try again
@rudifrew4098
4 жыл бұрын
Just done that and it Worked. Cant thank you enough THANK YOU!!!
@maadswift
4 жыл бұрын
Glad to hear!
@ryderjay0724
3 жыл бұрын
Do you need Logitech g hub ?
@maadswift
3 жыл бұрын
Yes for it to work
@ryderjay0724
3 жыл бұрын
Since downloading g hub I can't play any game with steering
@maadswift
3 жыл бұрын
Explain what happens
@ryderjay0724
3 жыл бұрын
@@maadswift I got g hub to download omsi it did work and I got my money back from omsi I already had my contro attached to tourist bus simulator not when I go on it the wheel doesn't spin I have tried everything
@mvpfamily6339
3 жыл бұрын
The Subtitel is wrong😂😂😂
@raoulraoul7129
4 жыл бұрын
My G29 is configured in GHUB, THE G29 is working on THE MENU OF GAME but when i exit the menu,the G29 not working anymore on the bUS too shame i bought this shit game.
@maadswift
4 жыл бұрын
Have you made sure the input is set on wheel and joystick not keyboard
@raoulraoul7129
4 жыл бұрын
@@maadswift Yes,the wheels is working only when i am in the menu of joystick(config menu) but when i click OK to come back to the game the wheel disables itself. I don t know why...
@raoulraoul7129
4 жыл бұрын
@@maadswift OMG is working now,in the right-down part of the screen there was a little menu on what to use Keyboard or Controller :)) Perfect now.
@maadswift
4 жыл бұрын
@@raoulraoul7129 good good
@ShadowViewsOnly
4 жыл бұрын
@@raoulraoul7129 What "right-down" part of the screen? Where exactly? Because I have the same issue now.. and I cannot find this keyboard or controller setting...
Пікірлер: 130