Thanks, i hope you have a new video about setting up PXV using Vision Configurator
@ravikumar-wr8ts
4 жыл бұрын
thanku sir, such a really good video
@PepperlFuchsUSA
3 жыл бұрын
Glad you liked it
@togakuk4202
2 жыл бұрын
Please tell us the solution of ChangeSensorState: get into parameter mode failed!
@PepperlFuchsUSA
2 жыл бұрын
Hello Toga, We are sorry you are experiencing difficulties, please reach out to our experts by clicking this link here, www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm. Thank you.
@fionnomuiri8045
Жыл бұрын
Hi there, I don't seem to have access to the position view tab in the Vision Configurator software v6.0 when using a PGV100 camera. Why might this be?
@PepperlFuchsUSA
Жыл бұрын
Hi Fionn Ó Muirí. What is the complete part number of the PGV you are using and what interface type (CANopen, RS485) do you have? The models with RS485 interface are the only ones that have the “Position View” tab. With the CANopen you should have the "Image View" tab. When you select the RS485 interface, do you see the "Position View" tab? If not, please fill out our Ask an Expert form here www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm Thank you.
@user-fi2zj5wk5n
Жыл бұрын
What cable has to used to interface PGV100RS-F200-B16-1,5M with the Visual Configurator? I have raised a query on Ask An Expert, but never got a response.
@PepperlFuchsUSA
Жыл бұрын
Hello Nishaanth T, Typically, you would use the PCV-KBL-V19-STR-USB cable unit. However, the device you mention has leads as opposed to a connector. You will need to add a connector similar to the 219138 V15S-G-ABG-PG9 to establish a connection. Please let us know if this works. If it doesn’t, don’t hesitate to contact us again. Thank you.
@user-fi2zj5wk5n
Жыл бұрын
@@PepperlFuchsUSA Got it, thanks. I'll let you know. What is the logic level of CAN signals in this model? Also is there any other medium to get in touch with tech support? Any email helpline with fast response? Ask An Expert doesn't seem to work.
@PepperlFuchsUSA
Жыл бұрын
@@user-fi2zj5wk5n here is the direct email ask@us.pepperl-fuchs.com, please email us with your questions and tech support will be in touch. Thank you.
@Alex-pz7kr
2 жыл бұрын
I can't find PCV100-F200-B17-V1D-6011 by profinet, default ip does not find. Do I need to make any settings?
@PepperlFuchsUSA
2 жыл бұрын
Hello Alex, are you trying to connect to the PCV100-F200-B17-V1D-6011 using Vision Configurator? If so, the PCV-KBL-V19-STR-USB must be used. A link to the product information page for this cable unit is below. Also, this unit will not connect to Vision Configurator via IP address. It will connect via USB and the IP address can only be viewed in this program. Please note that with the PROFINET read head, the PLC will overwrite the changes made via Vision Configurator. If you have any additional questions, please feel free to reach out to our Technical Support staff at 330-425-3555 or fill out our Ask an Expert form www.pepperl-fuchs.com/usa/en/ask_an_expert_fa.htm. PCV-KBL-V19-STR-USB www.pepperl-fuchs.com/usa/en/classid_9150.htm?view=productdetails&prodid=47526 Thank you.
@Alex-pz7kr
2 жыл бұрын
@@PepperlFuchsUSA Thanks for your reply. I succeeded, there was a wrong pinout of the profinet connector
Пікірлер: 14