Omg so helpful I didn't have grounding cords and was at a loss. Thanks so much!
@45ran
7 жыл бұрын
THanks heaps dude! Twice you've helped. Just makes life so much easier. Thanks !!!
@milesbonny
11 жыл бұрын
- Turntable (get one that allows you to change the cartidge/needle to any model or brand you want, it will screw on) - Mixer or receiver (with phono or turntable input) - Needle (that fits the turntable) - Speakers (go out from mixer or receiver)
@craigjohndavies6013
5 ай бұрын
I've done the set up but how come am red lineing?
@milesbonny
5 ай бұрын
red lining on mixer? maybe your turntable output doesnt need additional amplification and so maybe try line in on mixer instead of the phono input
@brianknotts4602
10 жыл бұрын
good video dude, thanks. Funny seeing the kid in it at the beginning
@wildbanjoman99
7 жыл бұрын
planing to hook up my turntable to a mixer and then run the audio into my CB radio via a studio mic so i can play vinyl over the air if i wish
@bitchpuhleese
8 ай бұрын
Thank you so much for the detailed and visual explanation-
@milesbonny
11 жыл бұрын
you dont need one if you use a mixer that has phono or turntable inputs. It serves as the amplifier. If you do not have a mixer with phono inputs, than you do need an amplifier. You can plug in the RCAs and Ground wire the same way on an amplifier. peace
@kidchan1850
10 жыл бұрын
DJ = Disc Jockey the more you know
@Toorin69
6 жыл бұрын
KidChan pretty sure that's basic knowledge for djs
@bobrew461
6 жыл бұрын
the poor girl just wants to play with barbie - not vinyl! :-)
@marcdequintanahereu9272
5 жыл бұрын
Very useful! Thank u⚡️
@jrmelo1232
6 жыл бұрын
Thanks for video Bro
@dulanawijeratne413
5 жыл бұрын
That’s one dad dj 😂😂😂👏🏻
@tobiCS_
4 жыл бұрын
That was great help mate. Thx
@bitinback2825
6 жыл бұрын
Technics 1200 are some of the best but them quickly
@fold2pe
8 жыл бұрын
hi sir. with the setup you made here. where was the speaker hooked up? I need help. I'd appreciate a reply thank you
@milesbonny
7 жыл бұрын
That model speaker is a Mackie SRM series Self Powered PA speaker - so I went directly from the Mixer using RCA cables out to an XLR cable to the back of the speaker.. the speaker has its own power cord .
@timlucas310
4 жыл бұрын
I have a turntable with built in pre-amp, connected to an amplifier. The amplifier is connected to my passive speakers. Do i need to connect the mixer to active speakers (the ones with a built in amplifier), or can i also connect my mixer to my amplifier which is connected to passive speakers? Or does the mixer work as an amplifier? I can't find the answer anywhere and i fear i need to buy an additional pair of speakers (active ones), is that necessary, or can i just use my passive speakers? Thanks in advance, good video by the way!
@milesbonny
4 жыл бұрын
1- If your turntable has a built in preamp - you may just be able to run it into any input, and maybe NOT the phono because it may too loud of a signal if the preamp has already been a part of the sound before it gets to the mixer's own preamp. IN other words maybe if the signal is distorted, use like a CD in or TAPE in to the receiver. 2- you can use either type of speaker. The Passive or Active Amplifier for your speakers is just about making the speakers work, it doesn't care what happened to create the initial signal ( music etc). If the speakers are playing sound, you are good to go and it is working. 3 - Im not sure what your system is doing that would make you ask these questions. Are you running into a problem? What is it?
@HeavyMetalWarrior6
3 жыл бұрын
Hi, so I can connect my Yamaha monitors to my Behringer vmx200 usd mixer using ethier rca to xlr or rca to 1/4 ... is that right?
@milesbonny
3 жыл бұрын
sounds right. Looks like your mixer has RCA out So yes - RCA out of the mixer to whatever your speakers accept as inputs.
@HeavyMetalWarrior6
3 жыл бұрын
@@milesbonny but the mixer's out says AMP, so it should be only for amplifiers? I want to know before buying the rca / to xlr or 1/4 , that is pretty expensive around here.
@milesbonny
3 жыл бұрын
@@HeavyMetalWarrior6 Yes I see it "amp" or "record" - Yes should buy the cord - BUT if the speaker you have is powered meaning it has it's own amp inside of it. If you speakers are passive and don't have a power cord the comes out of them and you need an amp. If you need an amp, you will connect the mixer to your amp and then your amp to your speakers. If you don't need an amp, then yes connect the mixer to your speakers. You can use AMP or RECORD out - whatever works if all good.
@HeavyMetalWarrior6
3 жыл бұрын
@@milesbonny Thank you so much. I have Yamaha HS8 monitors, I believe they are amplified? Then I should buy two cords, and connect one speaker to AMP and the other to REC?, or both just in AMP or REC
@milesbonny
3 жыл бұрын
@@HeavyMetalWarrior6 yeah I think they're amplified. Look them up online - they will say if active (are already amplified) or passive (need an amp). Its easy if you think about it in a basic way. You need to connect your speaker to the thing the sound comes from. So a cable goes from on to the other. One single mini RCA for the R (right) out from mixer to input of 1 speaker and then another single (mono) cable from the L (left) out from mixer to input of the other speaker. done
@Ryan-jh4hf
7 жыл бұрын
your video is really helpful but how do you setup the speakers
@milesbonny
7 жыл бұрын
to what kind of mixer? From this if it is a DJ mixer - you will go from the outs of the mixer to however your speakers work. If you have house style speakers with basic wires - you will need a Receiver not a DJ mixer to connect turntable and speakers to
@Ryan-jh4hf
7 жыл бұрын
miles bonny i mean a mixer like your to speakers like yours
@milesbonny
7 жыл бұрын
rca to xlr cable to speaker
@milesbonny
7 жыл бұрын
rca stereo cable to XLR cable
@MatthewNash92
8 жыл бұрын
can anybody tell me please if dj mixers have preamps in them ????
@steveshuffle
7 жыл бұрын
yes
@michaelbell5238
Жыл бұрын
Do i need at least 1 speaker? Preferably a powered speaker? I just got a set of Numarks & a mixer. Just learning! 💜✌🏽🎶
@milesbonny
Жыл бұрын
No you don't need speakers but you need it hear the music somehow and DJ mixers dont have built in speakers. So if you want to hear it without speakers you will need headphones coming out of the mixer. enjoy and have fun. Tell me how it goes
@D137
6 жыл бұрын
Great tutorial...Short and to the point. Someone help me out though. Did i miss how you hooked the speakers up too?
@milesbonny9577
6 жыл бұрын
RCA to XLR is what you need depending on what type of speakers you have. The OUTPUT on the mixer in the video is RCA. My MAckie speakers want XLR cables so i had one cable that changes into the other. I suggest determining what type of cables your mixer and speakers each in going in and out and then search online for a cable that has what you need on either end
@shorvath90
11 жыл бұрын
Ok so I wanna start to dj with vinyl but I know I need the turntables and the mixer but what bout the speakers and what else do you need to have a turntable setup please help
@milesbonny
7 жыл бұрын
its up to you = how to do you want to get sound out of your mixer? GO for it
@awotnot
4 жыл бұрын
so am i right in thinking the earth wires do NOT have to go from the mixer to the amplifier ie they just go from turntables to mixer and that's it
@milesbonny
4 жыл бұрын
Yes you are correct - and by the way I most often hear it called the "ground wire" but I know what you mean. Just the turntable to the mixer or amplifier, whatever the red and white cables Art going to, the ground wire also goes to.
@awotnot
4 жыл бұрын
@@milesbonny thanks
@miguelsalami
4 жыл бұрын
Beautiful filming & camera work BRB on my way to get a new pair of glasses.
@joshuawallace4961
8 жыл бұрын
Please answer my questions: Do all sizes of RCA cables fit into all inputs? Also, where do I get ground cables and the proper RCA cables.
@milesbonny
7 жыл бұрын
RCA cables are all the same basically. But Not every cable is an RCA. SO if your mixer has RCA outputs like in the video then you need to know what you need the cables to turn into to get into the speaker. IF the speaker is 1/4" or XLR you need a cable that will be one side RCA and one side XLR or whatever you need for your type of speaker. If you need help ask a friend or contact sweetwater.com or some music equipment website for help
@dregsta
10 жыл бұрын
I have a stanton str8-150 and there is no ground cable. Ive read that the ground is the ac power cable.
@milesbonny
7 жыл бұрын
Ok - does it work well when its hooked up? Some Turntables do have built in grounds in other ways
@JayJay-tw4nt
5 жыл бұрын
Is GND cheap? Might not have? As well as the other red and white plug!!!
@TaosAlive
5 жыл бұрын
Yes both are cheap
@milesbonny
5 жыл бұрын
Jus buy a Stereo RCA to Stereo RCA cable. And for ground - you can just use a piece of speaker wire. Doesnt have to be specific type.. just wire.
@gizzzzzzzz
2 жыл бұрын
can i plug my speakers directly to the mixer? or should i connect my mixer with amplifier and then to my speakers
@milesbonny
2 жыл бұрын
if your speakers need an amplifer then go from mixer to amp first.
@gizzzzzzzz
2 жыл бұрын
@@milesbonny ok thank you bro
@archiewilliams4479
11 жыл бұрын
do u neeed an amplifer as well or can u just have speakers man ?
@milesbonny
7 жыл бұрын
You need something to go between the turntable and speakers. A mixer, a receiver, a lil box from turntablelab.com -- something - they can answer questions too
@MrTkmarcus
9 жыл бұрын
sup all, im hoping someone can help me, i have a audioline dj controller. and 2 viynls/turntables - Sherwood 7u and traktor scratch control vinyl mk2. is there anyway i can hook those 2 turntables up to my controller in anyway? and if i need extra stuff what would i need to make it work.
@milesbonny
7 жыл бұрын
You need a serato mixer or a Serato Box like an SL1 or SL2 or SL3 - thats the cheapest way to go. The TUrntables would go to mixer then mixer to serato box then serato box would have a USB to laptop computer
@MrBarezoots
5 жыл бұрын
Dude thanks for the vid but where does the other end of the ground go ? Like you connected to the mixer and the other end goes ? Thanks
@milesbonny
5 жыл бұрын
The other end goes to the turntable. Either it will come out with the cables from inside the turntable or you will need to screw it onto a similar screw on the turntable as the one you see on the mixer. Altar and table The other end goes to the turntable. Either it will come out with the cables from inside the turntable or you will need to screw it onto a similar screw on the turntable as the one you see on the mixer. Most turntables have a red (1)and white (2) RCA cable and a ground wire (3) + a power cord
@MrBarezoots
5 жыл бұрын
@@milesbonny my man 👍
@indiazi
8 жыл бұрын
how did you set up the speakers
@milesbonny
7 жыл бұрын
Power cable and a cable from the mixer to speaker. IF you have non self-powered speakers you will need a receiver or amplifier to go in between the mixer and the speakers. It depends on the type of speakers you have
@esekaesecrew25
7 жыл бұрын
miles bonny how do you can connected whit interface?
@bategas
9 жыл бұрын
Hello. I have a "mixer" Stanton SMX 202 and a "turntable" Stanton T92 USB. And the sound is going through only the left side of my headphones. I use a P2> P10 adapter. You know how to solve this?
@bategas
9 жыл бұрын
bategas Like a mono, buddy
@milesbonny
7 жыл бұрын
Check connection of your Needle catridge to the turntable arm. The short cut is to unscrew your cartridge (the thing that has the needle on it that you screw into the tone arm of the turntable) and lick the contacts on the back of the cartridge so when they go into the tone arm and the hot the contacts in tone arm, they connect better. OR check your headphone connections to make sure everything is tight and working
@Mthedify
9 жыл бұрын
Hi I bought a cheap used mixer with 4 channels and i'm not sure if it works or not. I plugged in 2 turntables but i'm not sure what output connection i should use. There's options for rec, booth, zone and master. My amplifier has channels for cd, tuner and dat/tape and phono. Any ideas?
@Mthedify
9 жыл бұрын
***** It's a Stanton rm.402
@milesbonny
7 жыл бұрын
1- For output from a mixer use any - but id suggest Master - 2- If you are going from Turntable to mixer then to receiver for Input id say CD or tape. BUT IF YOU ARE GOING FROM TURNTABLE DIRECTLY TO RECEIVER And no mixer in the middle = use phono = phonograph is a turntable.
@josefk5659
3 жыл бұрын
Do I put the mixer before or after the preamp? Turntable ->Mixer->Preamp or Turntable->Preamp->Mixer?
@milesbonny
3 жыл бұрын
If your speakers are passive and need a preamp, then put the preamp after the mixer like your first list. If you’re talking about a preamp for a turntable then put it before the mixer but don’t use the “phono” input on the mixer use the “line in.”
@josefk5659
3 жыл бұрын
@@milesbonny awesome thank you. I called McIntosh yesterday. Their tech (who was unreasonably patient with me) told me the same thing. It’s surprisingly difficult to find this piece of info online.
@dinosgkoutselis3268
5 жыл бұрын
What if i cant hear my vinyl and it only works with an amplifier??? Please help me
@milesbonny
5 жыл бұрын
1 - If you cant hear your vinyl - make sure your needle is clean and working. 2- If something only works with an amplifier - maybe it need an amplifier. Please explain in more detail
@stevenic6643
5 жыл бұрын
how do you listen to one deck without bringing it in to match up the beats with the one thats playing etc as no video on here explains that,,,the m2 cant do it ,,you used to be able to press a button to hear the track which represented each deck ,,theres not one on the m2!!
@milesbonny
5 жыл бұрын
I think what you are asking is how to preview a side of music playing without it going over the speakers to audience? If so, You use a CUE function of the mixer and your headphones. You preview the side that isn't playing over the speakers in your headphones and prepare it to play over the speakers ahead of time so no one hears what you are going to play next. Does that sounds right? ON the M2 mixer it is called CUE and you use the sliding fader on the top right of the mixer to listen to one side or the other.
@stevenic6643
5 жыл бұрын
@@milesbonny yes but they are hard to find now..I have numark m101 and an m2 and you can't do it on either....can you suggest a basic mixer which have them cue buttons
@stevenic6643
5 жыл бұрын
Ahh right I was wondering what that was but I get nothing out if it..I must have wired the mixer up wrong thanks
@milesbonny
5 жыл бұрын
@@stevenic6643 Most DJ mixers have the ability to cue the track before it goes through the main speakers.
@stevenic6643
5 жыл бұрын
@@milesbonny thankyou
@Strfanopita
4 жыл бұрын
Cool video thanks! What baxes are you using to transport the turntables?
@milesbonny
4 жыл бұрын
I got flight cases for them.
@Strfanopita
4 жыл бұрын
miles bonny Thanks! What’s the brand?
@milesbonny
4 жыл бұрын
@@Strfanopita Any. Just search for turntable flight case.
@louisthurling
8 жыл бұрын
What was the name of the song you played?
@andrewlewis7409
5 жыл бұрын
Jrocc play this one
@JayJay-tw4nt
5 жыл бұрын
Andrew Lewis ??
@andrewlewis7409
5 жыл бұрын
@@JayJay-tw4nt the song is play this one by jrocc
@harrypavon5081
4 жыл бұрын
Where does the speaker are plugged?
@milesbonny
4 жыл бұрын
On a DJ mixer like this one - you connect the OUTPUT of the mixer to cables that then go into the speakers (if are self-powered speakers) OR if the speakers you have are not self-powered, than you will plug the OUTPUT of the speaker to a cable that then goes into a receiver of amplifier that the speakers are connected to - inputs in the receiver or amplifier can be the cd Input or tap input or "auxiliary" input. So the answer is that it depends what type of speakers you have.
@prendelalumbreofficial714
2 жыл бұрын
Do all tables have a ground??
@milesbonny
2 жыл бұрын
most do. if it doesnt, sometimes its built into the RCA cables. But if you see a screw on the turntable near the outputs, it needs a ground wire. Use a speaker wire if you dont have an actual ground wire
@prendelalumbreofficial714
2 жыл бұрын
@@milesbonny much love thankns
@prendelalumbreofficial714
2 жыл бұрын
@@milesbonny thanks **
@portenomasterrace8807
7 жыл бұрын
4:46 name of the song?
@diederikdelange3135
4 жыл бұрын
Can i use a mixer as a preamp?
@milesbonny
4 жыл бұрын
YES - As long as the mixer has a "phono" or vinyl input.
@diederikdelange3135
4 жыл бұрын
@@milesbonny Thanks imma give that a try :)
@andrewlewis7409
5 жыл бұрын
What if my turntable doesnt have a ground?
@TaosAlive
5 жыл бұрын
If there is no ground then two things could be possible. One if you plug the white and red RCA cable into your mixer or receiver and win playing a record you do not hear a buzz and the volume is loud enough that it is OK without the ground. If there is no ground then to things could be possible. 1- if you plug the white and red RCA cable in to your mixer or receiver and when playing a record you do not hear a buzz and the volume is loud enough than it is OK without the ground. 2- Look to see if you have that little metal screw looking thing on the back where the ground would go. If you do have that then you need to use a wire to act as a ground to connect that to the mixer or receiver. If you do not have that metal ground screw in the back or a hole where it should be, then likely you do not need a ground cable.
@andrewlewis7409
5 жыл бұрын
@@TaosAlive Thanks. one more thing, i bought a used vestax pmc 05 pro 3 and when i plug the rcas inside i get little to no volume. i dont have a pre amp because theres one built inside the turntable which is a audio technica lp120. so it could be the mixer but iam not too sure.
@milesbonny
5 жыл бұрын
@@andrewlewis7409 Make sure the turntable is going into the PHONO input on back of mixer. Then play a record and make sure mixer is on, then try toggling between LINE and PHONO on mixer.
@andrewlewis7409
5 жыл бұрын
@@milesbonny Thank you so much. everything is working now👍😁
@stevenic6643
5 жыл бұрын
whats the track at 7.02 ?
@milesbonny
5 жыл бұрын
kzitem.info/news/bejne/wGZuvaWwaXdnmJw. JRocc Play This One
@SIRKSxFUNK
8 жыл бұрын
What if you just buy Krk speakers
@milesbonny
7 жыл бұрын
Those are fine but you need to get a cable that will go from your mixer out to the speaker. if the speaker has both XLR and a 1/4" in you can use either to get sound into the speaker from the mixer - but you need a cable to match both the speaker and mixer - so in other words if you have a mixer like the one shown - you will need RCA to XLR or RCA to 1/4" to get the sound from mixer to speaker
Пікірлер: 110