The joke at 1:35 “dude sell it to your drummer” had me burst out laughing that was too good of a response 🤣
@lukehawkins7942
Жыл бұрын
This was the best explanation of this on the internet. Thank you a million times over!
@DougBsDigitalDen
Жыл бұрын
Wow, thanks!
@aaronarmentrout6776
5 ай бұрын
@@DougBsDigitalDenCan you do a video on using the Synergy SYN2 and switching its channels with the AXE FX 3 midi blocks?
@jasonshermandds6034
7 ай бұрын
I just wanted to say thank you. I had my wah up and running immediately, without any hiccup, thanks to your tutorial video. Cheers!
@DougBsDigitalDen
7 ай бұрын
Glad it helped, and thanks!
@NAILUJRT
13 күн бұрын
Amazing tutorial, thanks got it in one I love your approach now subscribed and ticked.
@DougBsDigitalDen
11 күн бұрын
Awesome, thank you!
@javee0
Жыл бұрын
Doug thank you. cant wait to see the rest of your videos..jv
@OddityDK
3 жыл бұрын
Exactly what I was looking for. Thank you!
@marchermans2318
6 ай бұрын
hi Doug, i've got mine now, your explanation was very help full . thx
@DougBsDigitalDen
6 ай бұрын
Glad it helped
@p1nkfl0yd1an
Жыл бұрын
I need someone who explains the Helix as well as you do the Fractal. Love your vids.
@DougBsDigitalDen
Жыл бұрын
Thanks, I really do appreciate it!
@clanyongco2908
Жыл бұрын
Thank you man! You're truly awesome! This is the clearest tutorial that i've searched in youtube regarding fm9/fm3 expression set-up! Well done Doug! Keep on posting and sharing your learnings with us with fractal products!
@DougBsDigitalDen
Жыл бұрын
Wow, thanks! I appreciate the comments 👍
@clanyongco2908
Жыл бұрын
@@DougBsDigitalDen do you have a tutorial in fm9/fm3 on how to turn on and off each effects in a preset just like a pedal should be?
@DougBsDigitalDen
Жыл бұрын
No, but I'll get right on it. Thanks!
@atthelimit88
2 жыл бұрын
Big Help! Glad I found your channel!
@DougBsDigitalDen
2 жыл бұрын
Glad I could help!
@Stash777
7 ай бұрын
Thanks man I tried looking in the manual but this was way better, had it set up in a fraction of the time 👍
@DougBsDigitalDen
7 ай бұрын
Glad it helped, and thanks for watching!
@akatom2u
2 жыл бұрын
Awesome content!
@DougBsDigitalDen
2 жыл бұрын
Glad you enjoyed it!
@redlatu21
2 жыл бұрын
Thank you! Easy to follow✅
@kenmullis6112
2 жыл бұрын
Very helpful.
@sqh365
2 жыл бұрын
Your videos are so good thank you
@DougBsDigitalDen
2 жыл бұрын
You are so welcome!
@rsvette123
3 жыл бұрын
Subscribed Buddy thanks so much - big help
@DrumsMacabre
5 ай бұрын
Thank you
@DougBsDigitalDen
5 ай бұрын
You're welcome 👍 Thanks for watching!
@Tony_spumoni
3 жыл бұрын
Thank you!
@Danielguit
Жыл бұрын
thank you very much !
@DougBsDigitalDen
Жыл бұрын
Glad it helped!
@grungebox
Жыл бұрын
Ha ha, I configure my expression pedal for Wahwah by plugging it in. That was it. Lol but if you want other parameter, she kinda have to rang a little little bit, so yeah you’re right in some situations.
@QuoVadis88
10 ай бұрын
How to setup Boss EV-5 expression pedal on TMP. Dial on EV5 at 0 or 10. How to set up Toe Switch on TMP with Boss FS5-L on TMP. Polarity switch which way, toward centre or towards outside. Simple operation for an engineer. For guitar player, not so simple.
@DougBsDigitalDen
10 ай бұрын
Dial at 0, because that's your "minimum volume" on the Boss EV-5. The Boss FSL-5 uses a standard 1/4" guitar cable, which would plug into the Toe Switch jack. If it's set to the wrong polarity, it will register on the upstroke, not the down stroke. Most of the time it will still work and be fine. So the easiest thing to do is try it in both positions and then use the one that you like. Good questions!
@aaronarmentrout6776
5 ай бұрын
Can you do a video on using the Synergy SYN2 and switching its channels with the AXE FX 3 midi blocks?
@DougBsDigitalDen
5 ай бұрын
Sorry, I don't have my Axe-Fx III anymore
@priode55
2 жыл бұрын
Got a ? My Wah sounds like it’s still engaged With heel all the way back I noticed it doesn’t bypass with heel back either Thanks love you videos
@DougBsDigitalDen
2 жыл бұрын
Click on the Wah block. Right-click on Control, which should bring up the Edit Modifier panel. "Off Value" should be 5%. Hope this helps!
@77Deafman
2 жыл бұрын
Thanks....accidentally did the global wah on an axe fx 3, got rid of it and couldn't remember how to on my new axe fx3 turbo...
@akundera
2 жыл бұрын
I thought an expression pedal could be assigned to every effecr for each preset? For example for preset 6 assign expresdion pedal to distortion level etc. Is it not possible ? Only volume and wah ?
@DougBsDigitalDen
2 жыл бұрын
It's absolutely possible. That first example showed how you could use an expression pedal as a wah. You can use it for other functions (and blocks) as well. The wah isn't global; it's in quite a few presets, but not all of them. Thanks for the question!
@akundera
Жыл бұрын
@@DougBsDigitalDen Yes but how do we do if we want another effect ?
@chrispotts4830
2 жыл бұрын
I calibrated my expression pedal for use with FM3, but it not only engages the effects: volume, wah wah, etc., but it also changes the scenes. Very frustrating. Anybody have any advice? Thanks.
@mswcky
11 ай бұрын
Hi! Do you have a tutorial video on setting up fender expression pedal on a tone master pro?
@DougBsDigitalDen
11 ай бұрын
Coming soon!
@mswcky
11 ай бұрын
@@DougBsDigitalDen Thankyou
@shellsjoint
2 жыл бұрын
Excellent video!! I need help!! mine is only working asa volume pedal and not as a Wah
@DougBsDigitalDen
2 жыл бұрын
Thank you! Are you using it with presets that have a Wah block?
@loveblindjohn3278
2 жыл бұрын
What is an FC-1 pedal? What makes it different than a typical bread and butter expression pedal? It wasn't explained and I can find no info about this. Thanks
@DougBsDigitalDen
2 жыл бұрын
Hi - you can have up to 4 of the FC units connected, either FC-6 or FC-12. FC #1 refers to the first FC pedal that you have connected. In my case it's my FC-6. Hope this helps!
@loveblindjohn3278
2 жыл бұрын
@@DougBsDigitalDen Thanks
@GuitaristGuyJames
Жыл бұрын
your cover photo is misleading... I was hoping this was going to show an Ep1-KP setup
@DougBsDigitalDen
Жыл бұрын
I'll have a talk with the Graphics Dept, sorry about that!
@GuitaristGuyJames
Жыл бұрын
@@DougBsDigitalDen no worries your videos are all great
@grabmarc
3 жыл бұрын
I have mission SP1 with toe switch.. How do I assign toe switch to turn on the wah block and then mute the block and use for volume in output? Please 🙏🙏 I just want to use 1 expression pedal for both functions… Thanks 🙏🙏
@DougBsDigitalDen
3 жыл бұрын
If I understand you correctly, you want this to be global, ie available in every preset? I'm not sure, since the SP1 has an output for expression and an output for the switch. I'll do some research, see what I can find
@grabmarc
3 жыл бұрын
@@DougBsDigitalDen Awesome thanks 🙏. Yes global 😊 if possible that would be great 👍
@johncairns4949
Жыл бұрын
Hi Doug I'm using a mission EP-1 expression pedal into my Fractal FM9 turbo system ' the mission SP-1 or EP-1 expression pedal had two separate connection sockets ( For I'm thinking 2 TRS stereo tipped Jack connector cables) my question is- and I'm using with my FM9 an Additional FC-6 foot controller unit ) if I connect one TRS stereo cable to pedal 1 on my FC-6 ' where does the second stereo TRS lead go into ? Would I connect the second needed TRS stereo tipped Jack lead cable to pedal 2 ' or not ? Also on the rear of my FC-6 unit theres two separate switch " inputs ( 1+2 and 3+4) when would I need to be using those switch connections ' do I also have to complete the calibration process setup by using the FM9 edit
@DougBsDigitalDen
Жыл бұрын
If you have a newer SP-1 like mine, you have to use a TRS cable for both jacks,and the 2nd cable should get plugged into Pedal 2 on the FC-6. The Switches inputs are for external switches. I use 2 Mosky dual switches with mine, and I have them set up to go to Presets, Scenes, Effects 1 and Effects 2. Yes, you'll have to use calibrate your pedal, but not with FM9 Edit. You do that from the front panel of the FM9. Hope that all makes sense!
@stepitupandgo67
3 жыл бұрын
how'd ya figure that out? I tried to do from the axe fx3 edit but struck out...
@DougBsDigitalDen
3 жыл бұрын
It took some digging, but from what I found you have to do it via the front panel. This is one of the rare times where Axe-Edit III can't help.
@stepitupandgo67
3 жыл бұрын
@@DougBsDigitalDen really appreciate your digging...I suspected as much...it's good to know!!! ty
@simonwilliams7608
8 ай бұрын
Nowhere in the video do you explain what it is about an expression pedal that you suggest makes it work any better, for the functions you're talking about, than a volume pedal.
@DougBsDigitalDen
8 ай бұрын
That's right, because the video was about setting up your expression pedal. However, I did say that it can replace your wah and volume pedals, because it can do those functions and so much more. Thanks for the comment!
@simonwilliams7608
8 ай бұрын
Fair enough. 🙂@@DougBsDigitalDen
@haroldsargent979
Жыл бұрын
i have no continuous on the FM3 I can't find it can you help?
@DougBsDigitalDen
Жыл бұрын
Take a look at pages 10 & 11 in the FM3 Owners manual, that should help you get it set up.
@DougBsDigitalDen
Жыл бұрын
The video that you watched was for the Axe-Fx III, sorry! I'll be making a video for setting up an expression pedal with the FM3 probably by mid-November
@d-no6358
Жыл бұрын
What pedalboard are you using here? It's got to be monstrous to fit the Fc-12 and two EX pedals(!)
@DougBsDigitalDen
Жыл бұрын
It's a PedalTrain, can't remember the model number. I have an FC-6 tho, not an FC-12
@akundera
Жыл бұрын
Everybody shows how to put a wah . But if we want another effect o,n the pedal ???
@DougBsDigitalDen
Жыл бұрын
Use a different effect block.
@thomaskolan3992
2 жыл бұрын
Doug....what brand of pedal do you prefer with the AxeIII?
@DougBsDigitalDen
2 жыл бұрын
Thomas - I have a Mission pedal and a Source Audio pedal. Both of them feel the same, but the nod goes to the Mission because of how it looks. Thanks for asking!
@HenryMittnacht
2 жыл бұрын
So far, so good! BUT, I have a Mission EP1 with the spring in it, so the heel position is supposed to be the "bypass" mode. Unfortunatly, after connecting it to my FC6, "bypass" is toe position and I cannot change it. It works really great but due to the default position "heel" the wahwah does not go into bypass. Do you have an idea?
@DougBsDigitalDen
2 жыл бұрын
Try this - in any preset, go to your wah block, right click on Control. This should bring up the 'Edit Modifier' panel.Take a look at "Off Value". If it is at 5% (default value) change the "Off Value" to 95% . If "Off Value" is already at 95%, try changing it to 5%. One of those should work for you. Good luck!
@HenryMittnacht
2 жыл бұрын
@@DougBsDigitalDen Yes, this could probably solve the issue. I just got my AxeFx yesterday and haven’t hooked it up to my computer and tried to solve it without Axe Edit. Thanks for the tip!
@HenryMittnacht
2 жыл бұрын
@@DougBsDigitalDen YES!!! That solved the problem! Works like a charme! Thank you again!!!
@EricGlassMusic
Жыл бұрын
Why would it take anyone 5 minutes to hook up an exp pedal? Plug it in, 10 seconds, done.
Пікірлер: 83