Just got introduced to your channel, I noticed a big gap in Posting. I’m new to this hobby and wow you have AMAZING informational videos. Hope you keep posting.
@SlicePrintRoleplay
Жыл бұрын
Hey there. Thanks so much for your positive feedback. 💚 You are correct, there has been a pretty large gap between my posts. I took a step back to focus on my family. But I should hopefully be able to get back into a normal routine again soon. Thanks again for your encouragement. 😊
@br0k3nilluzion
Жыл бұрын
do you play around with PrusaSlicer or bamboo studio these days? would love to see a video guide on making profiles for printers with those slicers as well.
@SlicePrintRoleplay
Жыл бұрын
I don't normally, but I certainly wouldn't mind learning different slicers. I'll see what I can come up with over the next few weeks.
@apraxas
2 жыл бұрын
I hit the like button because your character is adorable.
@SlicePrintRoleplay
2 жыл бұрын
Aww thanks! Orem is pretty great. 😊
@dwightbooth1661
Жыл бұрын
Do you have a video on how to add a STL file of the printer to make the build volume look more real?
@SlicePrintRoleplay
Жыл бұрын
Could you explain this request a different way? I'm not quite understanding it.
@M.lababidi
Жыл бұрын
Hi, Thank you for submitting this topic. I bought an EZT3D printer from eBay, but I couldn't find a shortcut for it in cura... can you help me set it up?
@Fsinohue
Жыл бұрын
That page isn't pulling up at all. I wish you described how you got to that. It's not the initial screen when loading that I can see.
@SlicePrintRoleplay
Жыл бұрын
If you'd like a tutorial going over how to install Cura and walking you through each of those windows step-by-step then I cover that at the beginning of this video. kzitem.info/news/bejne/xYqZt5OEoJuclqg
@SlicePrintRoleplay
Жыл бұрын
I apologize that this video didn't have what you were looking for. It's always difficult for me to know how much of the ancillary parts of a process I should cover without making a video too long.
@inovotny1412
5 ай бұрын
What do i do if i have a printer which isnt on the menu? Because i have an ender v3 KE and it isnt on there
@SlicePrintRoleplay
4 ай бұрын
I'd recommend using either Orca slicer or the slicer that Creality provided (on the USB drive) with the printer.
@pedrorocha1626
Жыл бұрын
Do you have a video that show the best setting for anycubic vyper using a 0.4mm for cura using PLA? is because when I am priting there is always some gaps on my prints , I do not now what I did wrong
@SlicePrintRoleplay
Жыл бұрын
I unfortunately don't have specific details for that printer because I don't have one. I'd recommend joining an Anycubic FDM printer group on Facebook, Discord, or Reddit. That type of community should be able to help you figure out the issue. But in the meantime you can try running a temp tower test. It's possible you're running the filament too hot.
@doublerpix1597
8 ай бұрын
With the Creality software I can add my printer because it detects it on my network, however the Cura slicer doesn't seem to see it in the network and just shows a blank list. How can I fix this?
@doublerpix1597
8 ай бұрын
I attempted to also add it by using the IP address but it just says "the printer at this address has not responded yet" and fails
@SlicePrintRoleplay
8 ай бұрын
@@doublerpix1597 I'd check all the relevant settings in both the Creality and current versions of Cura. Compare the two and see if anything is different between the two. It could be something as simple as the buad rate being different.
@BrunoSisler
Жыл бұрын
Hello, I have a XYZprinting DaVinci Junior 1 and I do not find it under the XYZprinting list of the Cura V5.2.1 under add printer tab, "add a non-network printer". I can find many other XYZ printers but not the junior 1. I also did connect the DaVinci Jr 1 with the usb cable to the PC thinking that this could help but no luck. Any suggestions please? Thank you, Bruno
@rdgd1rd
2 жыл бұрын
I can’t convert to g code once sliced it convert to 3mf how can I change that when I go to save there Isn’t an option to change for g code only 3mf I’m using windows
@SlicePrintRoleplay
2 жыл бұрын
Hmm that's odd. What printer do you have selected?
@rdgd1rd
2 жыл бұрын
Ender pro 3
@rdgd1rd
2 жыл бұрын
When I go to save project it only shows Cura project 3MF file (*3mf) not an option for g code
@SlicePrintRoleplay
2 жыл бұрын
@@rdgd1rd in Cura when you hit "Save to Disk" it should open a window. In that window you can choose where the file is saved to. Additionally, in that window below where is says, "File name" there should be a drop down list called, "Save as type." Click on that drop down list and look for STL.
@SlicePrintRoleplay
2 жыл бұрын
@@rdgd1rd what you're describing doesn't sound right. In the bottom right there should be a blue button that says, "Slice." After you click that and the model is sliced that button should then say, "Save." What your talking about is saving a project which is likely not something your printer can read.
Пікірлер: 29