Been looking everywhere for a video this simple and informative, thanks!
@americanlawdawg3609
8 күн бұрын
Great vid! Thank you! 🇺🇸
@paulhaines5755
10 ай бұрын
Very well done. Great vid. Thank you!
@themiddleman7322
Жыл бұрын
Fuck man thank you I've been looking everywhere for this
@steverichardson4808
Жыл бұрын
Easy to follow, thanks
@johnkurtz2192
Жыл бұрын
YOU ARE THE MAN THANK YOU
@shannonwilliams601
Жыл бұрын
Anytime glad I could help
@molaaliwaris
2 жыл бұрын
Excellent
@sergeyyakimov99
2 жыл бұрын
Thank you
@johndunawayiii4663
2 жыл бұрын
Thank you!
@shannonwilliams601
2 жыл бұрын
No problem glad I could help
@KodinKing
Жыл бұрын
I do have a question tho and it's a bit off topic but I put my stator on my 717 and now the thing backfires the front carb and the exhaust at the same time and won't hardly start. I even put the stator bolts in the middle and tightend it down. But it still does it. And I set my carbs right
@shannonwilliams601
Жыл бұрын
Check your keyway on your flywill and make sure that it hasn't slipped because if it slips even with the stater in time the engine will be out of time
@g_family1123
2 жыл бұрын
When your saying if there’s deep groves in the plate it won’t have power in the water does that mean it won’t start in water? Picked a couple of these up from a family member and after i got them running good on the trailer went to the water and one doesnt start in water even if I have it running then put it in the water it dies. Do you think this could be the issue?
@shannonwilliams601
2 жыл бұрын
Highly unlikely the first thing you want to do when you get jet skis from somebody and don't know anything about them is you want to completely go through the carburetors check the pop-off pressures rebuild the carburetors with genuine parts do a fuel pressure check turn back the spark plug wires they are known for rotting away and causing issues new spark plugs drain all the old fuel out do a pressure check on the fuel system change the jet pump oil check the wearing check your oil lines on your engine to make sure they are not brittle do all of these things before you ever hit the lake otherwise you will just cost yourself a engine
@dedmonhomerepairfencing875
Жыл бұрын
Thanks brotha u are the man very well understood
@ReeseCustoms
2 жыл бұрын
How do you know if you are supposed to use the numbers on the outer side of the template, or the ones on the inner side? For instance, 147 also aligned with 213 on your gage, so how do you know to use the inner numbers? Hopefully that makes sense.
@shannonwilliams601
2 жыл бұрын
Because the timing number is 147 not 213
@ReeseCustoms
2 жыл бұрын
@@shannonwilliams601 what I mean is, the gage has 147 on it twice. Once on the inner circle, once on the outer. How do you know which one to use? Did the gage tell you?
@shannonwilliams601
2 жыл бұрын
You have to use the outside number because the rotary plate is too large to line up with the inside number
@dawsonwells1193
2 жыл бұрын
@@ReeseCustoms he’s asking which set of number are you using on the wheel and does it matter?
@ReeseCustoms
2 жыл бұрын
@@shannonwilliams601 ahhh ok. Thank you!
@ripptydevibes2581
Жыл бұрын
Its ok to flip the valve, but then it covers the other hole. So it does not matter which way to valve is flipped, nor which hole is open/closed?
@3DPeter
Жыл бұрын
he flipped it upside down, but forgot to turn it 180 degrees. No matter witch side you use, always make sure you align the left straight edge to the 147 mark.
@ripptydevibes2581
Жыл бұрын
@@3DPeter Right on, thats the point that none states clearly. Making sure the plate is not 180* out lol. Very crutial information to those that are not technicians.
@shannonwilliams601
Жыл бұрын
You have to have common sense you can flip the plate over but you cannot put the bottom of the plate at the top
@jamescarone9553
11 ай бұрын
How does a sea food rotary jump timing without stripping or fusing gears?
@shannonwilliams601
11 ай бұрын
The gear just has to get a little bit worn and it will go out of time and then come back in time then go out and then come in and that's because the gear is worn
@user-vd6ti4mb5h
28 күн бұрын
0:51
@joeyperry7216
3 ай бұрын
How did you find the timing number for the engine?
@shannonwilliams601
3 ай бұрын
In the manual or online
@dedmonhomerepairfencing875
11 ай бұрын
Hello I have a quick question would this timing work for a 657x I cannot find the right timing number at all ?
@shannonwilliams601
11 ай бұрын
What is the year make and model
@dedmonhomerepairfencing875
11 ай бұрын
1994
@dedmonhomerepairfencing875
11 ай бұрын
1994 gtx 657x @shannonwilliams601
@dedmonhomerepairfencing875
11 ай бұрын
Some scribed mine at 147
@shannonwilliams601
11 ай бұрын
147
@brendansanders2981
10 ай бұрын
I have a 1990 587 yellow motor I have replace the magneto the flywheel it has a new carby fresh gasket kit, pistons appear good, I have timed the rotary valve at 130deg (from what I’ve found that’s what this model is) I have spark in both plugs which are brand new, I can not get it to start, I’ve tired the tricks with aero start in the carby also tried fuel, I get smoke come out the exhaust I did have a backfire was then told my timing is out so I again set this at TDC and got the valve at 130deg, I have a new and full charge battery and still nothing I get a little putter nothing really showing it attempting to actually kick over. My neck option is a fresh set of eyes having to pull the motor back out and take to local ski mechanic.. What am I missing? Any tips that may help here again it’s a 1990 seadoo bombardier GT 587 yellow motor Cheers
@shannonwilliams601
10 ай бұрын
Your rotary gear is worn down or missing the edge of teeth
@therestorementor7742
6 ай бұрын
Not 100% sure myself but I think the yellow engine runs at 115degrees according to the manual, can anyone confirm this regards martyn
@beeserious6680
6 ай бұрын
@@shannonwilliams601have a bad feeling about this although I won’t know till I remove it again arghhh
@beeserious6680
6 ай бұрын
@@therestorementor7742from the original manual it’s 130 for this motor
@therestorementor7742
6 ай бұрын
@@beeserious6680 I just checked my one is a xp 1992 this is the one year on the xp it should be set at 129degrees thanks for your response 👍
@ryantaube6546
Жыл бұрын
Why will you have no power and it won’t take off if grove in there ?
@shannonwilliams601
Жыл бұрын
Because you have blow by and it's losing pressure same thing if you remove the O-ring from the outside
@kylegreen378
Жыл бұрын
The fuel and air charge gets pushed past the valve, and back into the carb and intake. So, it gets charged with fuel again. So it will run like complete dogshit. You do not want flow reversion in your intake ever.
Пікірлер: 50