I thought Arnold Schwarzenegger was only playing as a computer I didn't know he actually knows tech stuff Thanks bro continue the governor stuff 💪👍
@Appregator
5 күн бұрын
😂😂😂😂😂😂
@Ahari51
Жыл бұрын
Thank you so much. I have struggled for ages to get this to work!! Note that the SSID given to the extender router must be different to the main SSID - that fixed it for me! Also start by deleting all WAN setups under internet setup before trying to "Enable DHCP Server relay"
@FordKnox
3 жыл бұрын
i just checked your video to make sure that i did everything correct, and i thought to myself, this guy is great, as he has the confidence to upload these type of videos.... carry on !!!
@jamesm1636
Жыл бұрын
Excellent, clear instructions. Very nicely done! Please keep up the great work. This was exactly what I needed. Thank you for taking the time to produce this great video.
@sreejinair
4 жыл бұрын
Arnold Schwarzenegger
@turboplays2067
3 жыл бұрын
oii i thought the same lol😂
@mohammedkazi6987
3 жыл бұрын
Sir, I would say only one thing Thankyou very much I had been trying to fix this issue for a long time you solved it in only 1 video Thankyou very much Sir
@HappinessIncPune
4 жыл бұрын
Thanks so much for this - you've made it so clear, and easy! Greatly appreciated!
@sameersarabjeet
Жыл бұрын
This video was so helpful I had to comment. Thank you so much for your help, I really really appreciate it. I had been sitting with this problem for days until I came across your video that solved my problem in 30mins. I really really am thankful for your help. Continue to make and produce quality and helpful videos. You have my blessings.🎉🎉🎉🎉
@sonikamanoj
2 жыл бұрын
I have been trying to do this from 4 hours sitting on a chair. Thank you for the video!
@jaimesegura5202
3 жыл бұрын
yes! I owned an older version (DSL2740) but I managed to make it work with your aid. I was lost especially in the WAN section part, didn't know what to set.... Thanks a lot!
@keananjones2722
3 жыл бұрын
I have the same router, can you help me please
@ykumar00
3 жыл бұрын
Thank you so much for your help! I'm a beginner to networking and your video was very informative and solved a few issues I was facing while setting up a similar network. Cheers!
@akhilchoudhary9527
2 жыл бұрын
Thanks a lot dude 🥳, I tried it more than 10 times today before watching your video I was missing on the DHCP relay thing
@kalbhor2010
Жыл бұрын
This is the best Explanation. all the best to you😀😀..
@Proeliumbyproel
3 жыл бұрын
Thanks for the thorough explanation
@GeraldSnyman
3 жыл бұрын
Thank you! You forgot to mention that after entering router IP, you need to reboot to show the option to select the RELAY option. It doesn't show initially. After reboot it shows.
@joshuamiller8506
2 жыл бұрын
I rebooted it and it still doesn't show me the RELAY option
@joshuamiller8506
2 жыл бұрын
Okay so you have to delete all the WAN setting first and then it will allow the RELAY option
@1971Swannie
Жыл бұрын
Worked like a charm. Thank you so much. Been wanting to do this forever.
@mahmoudmahrous4740
4 жыл бұрын
really good job bro i had a problem with reconnecting to the wifi, and that step on 6:28 helped so much good job
@NowInAus
3 жыл бұрын
Good lad. No geek bs, just so damned helpful. Cheers mate
@Dhu_alQarnayn
3 жыл бұрын
T-1000 teaching us how to setup an extender. Thats so cool.
@iknow925
4 жыл бұрын
Great video! Thanks alot! Only point is that any existing WAN Setups need to be deleted before you can enable DHCP server relay.
@muhammadabba8300
3 жыл бұрын
How do i do this?
@joshuamiller8506
3 жыл бұрын
Yeah I cant enable the DCHP SERVER relay.
@Rendon276
3 жыл бұрын
Thank you so much for this concise explanation. Nicely spelled out so that a noob like me can understand. It makes my day :-)
@myjames48
2 жыл бұрын
A Noob ? That is a first for me. Please explain. I am in South Africa. Never heard that expression. I have an idea of what you mean !
@HardusHavenga
Жыл бұрын
Thanks, well explained and helped a lot.
@hardusvd
4 жыл бұрын
Thanks I did mine and working perfectly.
@motheosekgetho9363
Жыл бұрын
Thanks so much!
@MufsulHijaz
4 жыл бұрын
excellent man. you saved my old router.good explaination.
@theoutlaw1555
4 жыл бұрын
Hi .. I’m moving from ADSL to FTTH .. I want to change my DLink VDSL router as an AP linking it via a Cat6 Ethernet cable .. my FTTH will be 20/20 .. im confident this tutorial will help
@Debraj1978
3 жыл бұрын
This did work for me. Thank you.
@thepedronix5318
3 жыл бұрын
wow nice vid arnold ill be back for more !
@masterchiefcode117
Жыл бұрын
Yess, this is it. The perfect explanation video.
@jimcrypto4690
3 жыл бұрын
its not a tuma... (thank you for this video Arnold)
@mohamedrahim6679
3 жыл бұрын
worked like a charm. Thanks
@non2614
3 жыл бұрын
can u help can you use as repeater but without ethernet cable
@brijeshsinghal
2 жыл бұрын
thanks man much appreciated
@jayan2316
3 жыл бұрын
good explanation brother. thanks
@bollywoodretrolover2151
3 жыл бұрын
Worked perfectly. You made my day. :). 1 Question 1 Have wifi USB dongle DWA 131 to connect my PC wirelessly with the WIFI. Can I use the same (DWA131) to remotely connect my DSL2750 through the USB port in 2750 to my main router and make the connection between my 2750 and main router wireless( presently it is wired as yours)
@hkiller8885
Жыл бұрын
This is from 3 years ago nice but what if i want to make this D2750U a WiFi Extender? use it to give my WiFi network more range.
@vighu007
2 жыл бұрын
Its worked!!!!! Thanks man
@mithun6055
2 жыл бұрын
Thanks for the clear explanation 👍
@MrIgottheway
3 жыл бұрын
I love you, it works perfectly 👌🏼
@floyd2250
2 жыл бұрын
Thank you so much, you made it very easy!!!
@travelsupport1260
2 жыл бұрын
How do I get it to work without the LAN cable, is there a way? Running the cable all the way where it needs to sit is going to be a mission and therefore thought it could be like an exact repeater/extender. How do I get it to connect wirelessly? or is D-LINK just not equipped for that and I need to purchase an actual wireless extender.
@Pranav-nn1lu
Жыл бұрын
did you find a solution for this?
@alirezafiroozbakhsh8092
2 жыл бұрын
Thankyou so much for your informative video❤️
@luxolomlatsha7822
3 жыл бұрын
I'm unable to tick on the relay at the bottom. It's not available for me to select it.
@GeorgePhilipBobby
3 жыл бұрын
Dude has anybody told u that u sound like Arnold Schwarzenegger
@saurabhjajo5414
3 жыл бұрын
Thank you buddy !!
@shreesharao4607
4 жыл бұрын
Thank you so much... Worked for me
@rohanji7918
4 жыл бұрын
Bro please explain to me by giving your mail id , I will ask you there
@jacquesjordaan437
2 жыл бұрын
thanks, but can you also add another ethernet cable to another router further on?
@abhijeetkamat2889
2 жыл бұрын
can we connect main router and dlink router wirelessly ??
@lesiakalane5536
3 жыл бұрын
Such a mzansi accent, love it
@aslamkhan01
2 жыл бұрын
Which port you connect cable lan or wan
@athulvs6361
4 жыл бұрын
Thanks it worked ☺️
@rogerumer1
4 жыл бұрын
Thanks I will try it.
@rajnikantkampelli2688
3 жыл бұрын
Thank you sir it's working 🙂
@yacinebelkemiti6058
Жыл бұрын
How can i connect to the website with the old router if it do not have internet ?
@egybecks
Жыл бұрын
Can I use the other ports ?
@newsboxhd4464
3 жыл бұрын
How to do it without cable? I need to make it repeter please info
@sgt-wd
3 жыл бұрын
The moment i change the ip and disable dhcp server, I can't connect or open the routers page anymore, new and old ip both don't work, ipconfig doesn't show the ip either Edit: figured it out, you have to connect the ethernet cable to the dsl router then you can continue from where you were
@harisbisati8910
3 жыл бұрын
Connect the ethernet cable to the main modem/router?
@sgt-wd
3 жыл бұрын
@@harisbisati8910 yes connect both routers together
@gordonmark9569
3 жыл бұрын
So I already have a CATe cross wired connected from LAN to LAN. Are u suggesting another or different connection? Cheers
@myjames48
2 жыл бұрын
Hi there, my D link won't allow to bypass as a repeater/Relay. What can I do to overcome this. The blog is there, but I cannot open it. Jimmy.
@georgekatsouras5507
2 жыл бұрын
great video, thank you
@MayankDehgal
3 жыл бұрын
Thanks man
@cupidjrrobianto
2 жыл бұрын
not finish yet.. how to setup from lan become access point
@mohithalder3169
Жыл бұрын
Umm... So I'm having an issue where I am unable to connect to the access point because my device can't obtain an IP address..... Any suggestions?
@lolososo6760
Жыл бұрын
Does it work also an 2740U?
@Marty501000
3 жыл бұрын
can this be used as a wifi repeater
@Bruisader
2 жыл бұрын
2750U in my case doesnt have DHCP server relay option/ Is this thing country specific?
@nkosanabavuma5295
4 жыл бұрын
Hi, I would like to Enable DHCP Server Relay my Router shows Grey as Disabled and another question my Primary Router is Different from DSL-2750U and also its Gateway IP Address is 192.168.88.1 and the IP address for DSL-2750U is 10.0.0.2. I would like tu setup this DSL-2750U as wireless point on Ethernet network, please assist and thanks for the Video.
@ecologicaltime
4 жыл бұрын
you can change the routers IP address to whatever you want to. It does not need to stay at 10.0.0.2
@veron4404
4 жыл бұрын
Hey did you find DHCP server relay option on DSL-2750U? If yes please tell me where it is
@waldonortje
4 жыл бұрын
Please note that if your DHCP server relay option is disabled under local network setup, you need to delete all configuration under internet setup and 3g internet setup and this should make the DHCP server relay option availible.
@eomax8835
4 жыл бұрын
Thanks a lot
@mohammedasifshaikh9064
4 жыл бұрын
sir in my dsl 2750u modem its not showing wireless setup wizard
@suhass4532
Жыл бұрын
How to connect without lan cable
@otienokojwang
2 жыл бұрын
Where is the 'Remote Management' menu for this router. A friend asked me to go help him out and I couldn't just figure it out!
@riaanpretorius2858
2 жыл бұрын
Could I make the dlink router receive a wireless signal from a router
@subinraj9532
3 жыл бұрын
Can we use wireless N 300 ADSL2, DSL-2750U as a repeater by wireless method?
@gordonmark9569
3 жыл бұрын
Greetings After reading and watching several articles and videos; finally able to configure properly my 2 routers to work properly. Made one adjustment. Have manually set my 5Ghz signals on different signals since both my routers close together. My reason for 2 routers mainly for security purposes not so much extended range. U da man. Like a subscriber below, I can no longer access, my second router but I can access my main one. Second router DHCP off, LAN to LAN, (main to secondary) with CAT 5e cable (cross wired) , but no longer access to second router D-Link via new IP address. Any help would be appreciated. Cheers
@andysnew385
4 жыл бұрын
THANKS
@ranjithkanagaraj9162
3 жыл бұрын
Everything working but finally internet not connecting, help me to solve.
@justinjagadao7123
2 жыл бұрын
enable dhcp server relay is graded out on my router
@villianinurheart9219
3 жыл бұрын
How to delete the items on channel config
@MacacoMoninheiro
2 жыл бұрын
when I go into my d-link settings for my router it doesn't give me the option to make it a repeater. I cant click on the box. Anyone know why?
@rahmanenam
3 жыл бұрын
Can help me i have dlink dir632 but i like to use as a extender
@gunjanagarwal415
4 жыл бұрын
I have done all the step but stil my secondary routers is not able to allot IP.. I'm getting the error. Could you please suggest.
@azharessop916
3 жыл бұрын
After rebooting it logged me out and I can't log back in. It says "Authentification failed". And idea on how to get past this?
@WRMILLER
3 жыл бұрын
Hi and thanks for the upload, question tho... my D-Link DSL-2750u the enable relay is greyed out... how can i get past that??? i have tried resetting my router to default. but its still greyed thus not allowing me to setup the relay option.
@WRMILLER
3 жыл бұрын
no worries 7:00 i delete the internet settings and then the option for relay was click able :D
@jtoeleraj
4 жыл бұрын
Nice advice But to which port(1,2,3 or 4) I have to, need to connect my ethernet cable(local network cable) ? Also can my local area network (office network) the connection cable of which is coming to my office and its a ethernet cable. (for office work). Please reply I mean to say I want 2750U to use as wireless router.
@bhavyayarora6487
3 жыл бұрын
Did you figure out how to do that?
@jitendrasharma252
2 жыл бұрын
please provide me a driver installation setup in zip file.. because my cd has lost so can't unable to install it
@meurtrie
2 жыл бұрын
Thank you mister schwarzenegger
@phrodisiac
3 жыл бұрын
Hi I'm battling with my setup.
@AjmalKhan-sf4dm
4 жыл бұрын
Hello I have a problem...I have a D-Link dsl 2750u..I have reset to default....when I go to 192.168.1.1 it asks for password and username...when I type admin and admin (my default credentials given at the back of router) ...it doesn't open the router settings...it just disappears and reappears asking for password and username..plz help
@Rendon276
3 жыл бұрын
Just one problem though. My 'Enable DHCP Server Relay' option is grayed out. How does one resolve this? (Anyone?)
@SAM_DIVINE
4 жыл бұрын
Can u help in mac filtering??
@mtngwane2066
3 жыл бұрын
What do I do if my connection is still weak even after installing the access point?
@bridges5659
3 жыл бұрын
Get a High frequency range extender , N300 and up. Your Ethernet cable shouldn't be more than 100 meters from main modem to relay router.
@nirmalthapa8846
4 жыл бұрын
How to convert tp link modem to bridge router
@hobsonguy
4 жыл бұрын
I have the same router. Is it possible to use it to connect to the home network over WIFI and share it to a WIRED device such as an old xbox 360 that doesn't have wifi? I really don't want to run a cable that way
@ecologicaltime
4 жыл бұрын
yes
@Fyre_Fuoco
3 жыл бұрын
Can either of you please explain how or lead me in the right direction to do this?
@ankitakataria7773
4 жыл бұрын
Even after enabling relaying and deleting Internet configuration my DSL 2750 U (modem + router) is not working as a repeater...Please help
@sandhyamanjunath
4 жыл бұрын
Please try the below steps: 1. First update the modem to latest firmware version. 2. Enable the mac address of your computer which you are using for configuration inside the white list in mac filtering advanced. 3. Once this is done remove anything in 3g settings. 4. now change the IP address without disabling DHCP server. This is the important step which has been missed as in case there is DHCP manual in your laptop settings it will not allow you to change the IP address of the modem. Once this is done uncheck DHCP server as well as DHCP relay. It should work fine.
@ricky-gl7of
4 жыл бұрын
Hello I have done all the steps . Here my main modem is genexis which comes with ftth. I am using dlink 2730 as secondary modem via ethernet cable from genexis modem. Now the device is connected and internet is also available. But the devices have obtained ip address from the first modem and now im not able to access the dlink router page. Do you know what is the reason . If yes pls reply
@ecologicaltime
4 жыл бұрын
you should set your Dlink to have static ip address. Then set it as DHCP relay. Some Dlink routers are not designed as access point even though they can act as access point. there are some issues with some.
@petersalazar1790
3 жыл бұрын
As soon as I enter the IP address and enable the DHCP server relay and click on Apply, I am unable to go to the next page. It says ‘site cannot be reached’even though I am still connected to the net. Please help !
@thabanimathenjwa6459
3 жыл бұрын
Hes too fast on that part
@karrystudioold
3 жыл бұрын
cannot use wifi briging ?
@jestin210
4 жыл бұрын
I tried to do with 2790 U. My primary ip is 192.168.100.1, so i gave 192.168.100.10 to my secondary. But after these clicked on apply button unfortunately it is not rebooting my secondary router. What did i miss 😥
@gordonmark9569
3 жыл бұрын
I would try for second router 192.168.100.2 the numbers have to be closer
@nams15
4 жыл бұрын
There's no Router Ip address setting rather Lan IP address which doesnt change. Help!
@athulvs6361
4 жыл бұрын
First factory reset the router.
@becool420
8 ай бұрын
This model probably not suitable to connect to ur main router wirelessly. U need to run a cable betwee ur main router and ur old D-Link 2750U, follow the setup process of this video and then connect wirelessly to 2750U.
@dannyabishekscott5640
3 жыл бұрын
Im having an issue with setting up d - link as repeater can I contact you via email?
Пікірлер: 157