I recently got the ILS Command. Basically I'm almost satisfied. If I have the Sound to Light mode active, the moving heads change extremely quickly. Way too nervous. This was also the case with the Gigbar (controlled without ILS Command) before the update. Great after the update. Now to my question: is there an update for the ILS Command so that the gobos change is slower? If so, how can I update the ILS Command? I currently have version v.14 on the ILS Command and on the Gigbar V2.06 Thank you for your feedback signal.
@elegancequartet
5 ай бұрын
How do I select which moving head to use for Follow Spot? Currently when I press and hold the follow spot button both moving heads just stop rotating and turn off. Even if I set the X Y points and save I still can't get any of them to turn on or move as a spotlight.
@georgethedj4946
Жыл бұрын
I notice that the Ils gig bar moving heads are the same color and gobos in AUTO mode as long as the pars or Derby’s are on and both movers match. But, the movers are different colors and gobos and do not match each other in sound mode. Any one notice this as well.
@radiodjs1
Жыл бұрын
Why is the power cord so short? It's 19" long! I can't even get that to an outlet. I'll have to run an extension cord to it!!
@timothykresko1984
3 ай бұрын
😂
@DanFallonMusic
13 күн бұрын
How do you use this controller with the Gigbar move (no ILS)
@pedrovillegasradio8516
10 ай бұрын
I need help y put the botton Follow Spot and the spot not respond
@rafaelunplugged
4 ай бұрын
When I press and hold follow spot - neither of my lights react. How do I choose the fixture?
@doubler2k
3 ай бұрын
Make sure you turn on follow spot on the gigbar move ILS. its not on by default. Took me forever to find that out.
@joeleonard3051
9 ай бұрын
I did everything and i can not get the gig bar move +ils to connect wireless. If i connect it through the dmx cable everything works.
@Rainbow-wd6sc
8 ай бұрын
check to make sure you are on the same d-fi channel on both the controller and gig bar
@marcatone
4 күн бұрын
Have the same issue, double-checked everything 20 times. Firmware updates are done too. Guess it is an hardware issue? 😫
@andrewwheatcroft9388
Жыл бұрын
Can you use the DMX wired for lights that aren’t compatible with the wireless
@Rainbow-wd6sc
8 ай бұрын
you can by d-fi dmx transmitters
@djchinolivecom4825
5 ай бұрын
I just got my ILS command. Turns out my Gig Bar is only move and doesn't have ILS. Can i still make it work? If so, how? Thank you
@maxjames6979
Жыл бұрын
Just got my Command. I’m struggling to get the follow spot function to work. When I hold go into the setting, none of the moving heads react. (Using 2 gigbar moves with ILS) Any help would be appreciated.
@Sarahbair
Жыл бұрын
I am with you, just got mine as well and also cannot get followspot working?
@djRockalot
Жыл бұрын
Same here, no reaction in Follow Spot edit mode
@matlightfxproductions
Жыл бұрын
Sooo I think it’s a software thing I believe as the software updates there will be a similar display on the screen
@djRockalot
Жыл бұрын
@@matlightfxproductions my display acts/shows as in the how to videos its just that the mover doesn't react. The fact that they show this w/o out explanation that it will work later or only works for some sucks. Also when setting up the Command for the first time you're screwed w/o watching a video since it doesn't say anything in the manual about putting your Gig Bar in Slave and RX.
@georgethedj4946
Жыл бұрын
Just set up as well but no go regarding the follow spot
@matlightfxproductions
Жыл бұрын
Oooooh I just preordered mineeeee
@djRockalot
Жыл бұрын
ordered mine April 16, 2023 still waiting...
@matlightfxproductions
Жыл бұрын
@@djRockalot they told me the end of August
@djRockalot
Жыл бұрын
Thanks for the heads up, dates keep changing!
@matlightfxproductions
Жыл бұрын
@@djRockalot yea it was at first supposed to be late June early July but I think so many people have preordered it it’s gonna be awhile
@djRockalot
Жыл бұрын
@@matlightfxproductions and they keep advertising it!
@djjerryg_soundexpressenter5874
Жыл бұрын
Also, what is the recommended DFI channel setting?
@Rainbow-wd6sc
8 ай бұрын
16 is the least crowded
@22arickz22
5 ай бұрын
what if i want to control various lights from other companies using the DMX out?
@ClevelandTerry
4 ай бұрын
You can’t.
@CableRayquaza
10 ай бұрын
I have a gig bar 2. Just the 2 pars, 2 derby, and the lasers/strobes. Is this compatible with this controller?
@Rainbow-wd6sc
8 ай бұрын
if you buy a usb or dmx d-fi transmitter and plug it into the bar then yes
@section8sam
Жыл бұрын
How many gig bars can you use on an ILS command
@chrismueller1805
Жыл бұрын
I believe you can have 2 ILS gig bars
@DizziB23
19 күн бұрын
Great Question. This is what I needed to know…
@DizziB23
19 күн бұрын
I’m assuming you would just mirror the settings and Slave it to get the same functionality.
@djMotivation77
Жыл бұрын
Does this work with the gigbar move? The gigbar Without +ils?
@Rainbow-wd6sc
8 ай бұрын
you will need a d-fi usb or dmx transmitter
@RyanGrantOfficial
10 ай бұрын
How do you control the second moving head follow spot I can only do one for some reason
@djRockalot
10 ай бұрын
Currently the follow spot function only works with one mover
@louguzzo4977
8 ай бұрын
@@djRockalot Can I run the spot function with my 160's spots?
@djRockalot
8 ай бұрын
hey@@louguzzo4977 if you're referring to your remote ILS 160's that are not fixed to the GigBar then NO, only the ones that are actually on the GigBar are controllable with the Follow Spot mode, at least that was the case the last time I checked.
@jenneric
Жыл бұрын
Just got mine and I'm not sure how I can get the lights to react to "sound mode"
@Rainbow-wd6sc
8 ай бұрын
you have to plug in your device using a 3.5mm headphone jack
@user-ij2zj5cn6k
10 ай бұрын
MY ILS 160 Movers, do not have an ILS option on the setup option....where am I missing this? There is no follow spot mode on it either.
@user-ij2zj5cn6k
10 ай бұрын
And yes, they ARE Chauvet 160 ILS
@DJDarrylGreen
9 ай бұрын
@@user-ij2zj5cn6ksame, any luck?
@cconnerolson
Жыл бұрын
Connect hardwired with an XLR cable? Seriously? This is an official Chauvet video, I would expect better…
@lloydbridgessniffinglue
3 ай бұрын
Did you only watch the first few seconds?
@timothykresko1984
3 ай бұрын
Huh?
@quentinsmith4358
11 ай бұрын
Can you control a gigbar move non ils by the dmx port?
@Rainbow-wd6sc
8 ай бұрын
yes
@djchinolivecom4825
5 ай бұрын
How? Please let us know
@Rainbow-wd6sc
5 ай бұрын
@@djchinolivecom4825 you’ll need a lighting controller to patch the gigbar into and to set the gigbar to the same address
@karMyloPonderosa
7 ай бұрын
Does this work for wash fx2 ?! Im so sixk od using dmx peogram
@joegrimmemusic
5 ай бұрын
Why is this system so non user friendly? I've got all the cables setup and canmot get the board to take control of the lights.
@djkillabees95
Жыл бұрын
Do you need a D-fi usb stick.?
@maxjames6979
Жыл бұрын
Not for gig bars with ILS, but you will for any other fixtures with ILS, such as pars or swarms.
@djRockalot
Жыл бұрын
you don't need a Di-fi USB for the Command, its built in.
@anthonyfreiwald268
Ай бұрын
Wow! What a major disappointment this has been. I WOULD NOT RECOMMEND ILS or anything Chauvet. Ever again. I ordered the command, the gigbar move, and two of the 4bars. First, no manuals. You have to have internet and a device handy. Second, they ought to perhaps train their authorized dealers on what is needed to make this stuff work together. Maybe clue them in how Chauvet wants another sixty bucks a fixture to make it work with the system it's supposed to work with. The command module is overblown, oversized and poorly designed. Especially, the idea combining the enter/select button into the x scroller. Finally, let's talk CHEAP quality. Plastic housings and the REAL kicker is the cheap n flimsy bags for the 4bars with... (I'm not making this up) just a thin strip of styrofoam tossed in there. Sent it all back. I'm dropping this review wherever I can.
@samuelmunoz3793
Жыл бұрын
Gig bars have pedal control😂😂
@jimbogrits3
Жыл бұрын
Probably one of the worst explainer videos I've ever seen from a pro company. You can't see anything he's doing or how it affects the fixtures when he presses buttons. Tons of dead space. Also, "I want a blue light setting on the pars...so I'll save that preset button color as RED." ....what??
@jamesskinner8779
Жыл бұрын
I absolutely agree. Nowhere does he explain that too use the Followspot mode the Gigbar itself (not the Command) has to be running Firmware v2.07 or higher and then you have to activate Followspot mode in the Gigbar menu system, where you can select head 1 or 2 to act as the followspot.
Пікірлер: 78