Could you Please do the mentioned FOLLOW UP TUTORIAL video for the Kpro 4? Thanks in advance. Peace
@SniperX_Cod
Ай бұрын
id like to send my ecu in to get this done but theres no option on the website for it.
@KuganTuning
Ай бұрын
@@SniperX_Cod here’s the link for it kugantuning.com/products/hondata-kpro
@andyhammond2212
7 ай бұрын
Couldnt find a option on the site for 02-05 civic si ep3? Ready to pull trigger on Kpro! HaMotorsports has em in stock
@KuganTuning
7 ай бұрын
Here you are 🙂 kugantuning.com/products/hondata-kpro-v4-k-02-05-civic-si-ep3-pnf-ecu
@wildinant9758
5 ай бұрын
Hello how do I run a wideband to kpro
@KuganTuning
5 ай бұрын
Depending on which wideband you have you run the 0-5v wire to AN1 and then open Kpro and goto Parameters > Analog Inputs and click on Analog 1 and click on "Conversions" and select your wideband and make you name it wideband. Then click on the Closed Loop tab and select External Wideband and select the wideband you just created. Press upload and it should work. Depending on how you wired the wideband's ground you might have to adjust the voltage offset under "Analog Inputs" make sure you adjust in small increments like 0.01 or -0.01 and keep adjusting until the kpro matches what your wideband reads
@grommyjohnny824
8 ай бұрын
hey man is there anyway to run the ecu without plugging it into the car to chec kif it works?
@KuganTuning
7 ай бұрын
You would have to bench power the ecu with power and ground to the correct pins
@Menace2Society23
Ай бұрын
Hey bro I got a k24a2 swapped RSX base and I can’t get it to run good
@Menace2Society23
Ай бұрын
Do u sale any base maps it’s a stock k24a2 dcsports headers and RBC manifold stock base 5 speed and a cold air intake
@KuganTuning
Ай бұрын
@@Menace2Society23 what issues are you having with it? Is the check engine light on and for what?
@bantu7078
6 ай бұрын
i just got my ecu back after purchasing a kpro - it does not rev over 3k rpm its undrivable after installing it like it just doesnt go over 3k rpm at all while driving, i have intake, exhaust and headers, will this solve my problem?
@KuganTuning
6 ай бұрын
If the file your using is corrupt yes. If your current tune file isn't corrupt then it probably wont help
@904khmer
8 ай бұрын
I bought a rsx with kpro already in it. Would i have issues getting in it and make changes? 🙏 Thanks
@KuganTuning
8 ай бұрын
Depends. Sometimes yes. Sometimes no. When you plug in you can download the map. There are times when you download the map but it’s corrupted because of software version differences.
@scavacadoyt9244
5 ай бұрын
Hi was it hard to pull the current tune? I’ve got a kswapped car and would love to do some tinkering but I’m scared af 😂
@user-zy8fh2ef5o
8 ай бұрын
Noob question. So what do i put for racing licensing number. Im just a guy trying to do a swap lol im not apart of any organization
@KuganTuning
7 ай бұрын
Its for off-road use only. Needs to be a competition vehicle
@bradparks1788
5 ай бұрын
Also desperately trying to to find the answer to this question.
@user-zy8fh2ef5o
4 ай бұрын
@bradparks1788 yeah I've decided I'm going haltech. Gotta get with the times anyway
@prcc8793
9 ай бұрын
Good info!!brother question, mine is a 05 type s rsx..with k24/20 swap..what a really need to get a kpro?do i need to find a 02/04 type s ecu or you guys have everything i need just plug and play?thanks
@KuganTuning
9 ай бұрын
Here is what you need for a plug and play solution. Make sure you select yes to the jumper harness, that is what is going allow you to run a 2002-2004 ecu. kugantuning.com/products/hondata-kpro-v4-k-02-04-rsx-typs-s-prb-ecu
@prcc8793
9 ай бұрын
@@KuganTuning thanks
@derrickseay942
7 ай бұрын
Noob here …. I think I downloaded a base map and uploaded itbefore I registered the ecu in my name now the immobilizer won’t turn off
@KuganTuning
7 ай бұрын
It can be turned off from in the parameters > Misc
@king0684
Жыл бұрын
Thanks for sharing!
@nvlavoz6424
11 ай бұрын
I get no power on ecu. It shows On line and ignition offline. Any idea what may be causing this?
@KuganTuning
11 ай бұрын
What engine harness what adapter harness?
@nvlavoz6424
11 ай бұрын
@@KuganTuning ktuned engine harness and hybrid racing conversion harness
@KuganTuning
11 ай бұрын
@@nvlavoz6424 check main relay and ground closest to the intake manifold
@nvlavoz6424
11 ай бұрын
@@KuganTuning main relay doesnt click and grounds are good
@KuganTuning
11 ай бұрын
@@nvlavoz6424 if main relay doesn’t click then there’s your problem
Пікірлер: 34