I did everything as in the video, but the reverse does not work for me. It activates literally by 9% and then to switch to gas, I need to click the mouse in the cabin itself
@quentinbouillet6218
7 ай бұрын
It does work, but it seems that you have to start the engine to see it working entirely. The reversers won't work when you are on cold and dark on the apron.
@molotkovdmitry
6 ай бұрын
Did you fix the problem with reverse?
@skywhywalker1
6 ай бұрын
@@molotkovdmitry Yes, the problem was that I checked when the plane was not in motion. As soon as I accelerated and turned on the reverse, everything worked
@Noob503sv
8 ай бұрын
id doesnt work for me, once the reverse levers go up they dont move anymore in sim
@Lwright
8 ай бұрын
Anyone else here had the issue that it selects reverse but then doesn't come back out of reverse when moving the throttle levers back to idle? Only way i can get it out of reverse is by moving the levers in the cockpit with my mouse!
@toastedtea
7 ай бұрын
SAME!
@Lwright
7 ай бұрын
@@toastedtea I figured it out in the end, turns out you have to have engines running! I was trying to set it up with the engines off and it wouldn’t work. As soon as I fired engines up it all worked beautifully
@PhysicsLad
Ай бұрын
👍👍👍
@diamondmafiamedia9100
9 ай бұрын
i copied you and have the same quadrant it does not work at all
@crazydanz
9 ай бұрын
Try giving this a shot. Flip the quadrant over and remove the 8 black screws that hold the black plastic tabs into place. Remove those tabs and flip them around. This will then remove all the detents from the quadrant. You can then lock the reversers into the upright potion which allows you use to the full range of the throttles. I then simply bind the left side "auto throttle" button aka the red button on the left engine throttle. So that if you press and hold it.. It'll activate the reverse thrust. This also then allows full range of both the throttles allowing you to not just 100% reverse when not needed. You would need to create a separate profile for Boeing and Airbus in msfs and would need to unscrew the tabs each time. But I found you can do that while the sim is loading up.
@diamondmafiamedia9100
3 ай бұрын
I got it work now thank you so much for this video your the best!
@goringo_
Жыл бұрын
I am really desperate... I have seen this tutorial and other one which are same settings, but even if I follow 100% all the steps, its not working for me - the IDLE to TOGA works fine, when I engage REV buttons and move to REV, PMDG will respon with REV idle (first position) and then its stuck here no matter what... I have to click with mouse to the REV lever in order to get the throttle back in control :(
@kingbarnab344
11 ай бұрын
same here any fix?
@gregsmith6089
8 ай бұрын
Same for me. The reverse does not fully engage, but then the levels stay stuck in one position and nothing moves. I created my setup by duplicating the default.
@christophersanford1689
Ай бұрын
I'm also having this issue, with this throttle as well as with other throttles. Seems like a bug with PMDG as I don't have this issue with other planes.
@seagilly1881
Ай бұрын
Same here
@seagilly1881
Ай бұрын
Found a workaround. You can assign button 1 to "Toogle reverse thrust". Once you move the thrust levers out of the reverse position into idle, just click the button twice and reverse deactivates. Not realistic but oh well..
@chrisclose6984
Ай бұрын
Important: You MUST assign the "Throttle# Axis (0 to 100%)"" Axis, not the "Throttle# Axis as for the Airbus 😎
@willroberts2773
Жыл бұрын
Absolutely nothing wrong with your set up using yoke and airbus throttle some people just love a good moan mate. Keep up the great work 👍🏻
@pansearedducklet9054
Жыл бұрын
Well said
@simpilotspud8296
9 ай бұрын
Wow! FINALLY. I’ve been trying to figure out a way to get this to work and now my reversers are working just like they would in the Airbus which makes it so much easier! Just tested this on a rejected take off and everything worked perfectly! Thank you!
@CornWolf
3 ай бұрын
I am not sure what I am doing wrong, I have your exact setting but it not fully registering like yours in the video. Its almost if I need to calibrate it with the 737 but nothing in the menu.
@95andyj
2 ай бұрын
Using the "decrease" to move the throttle to reverse is just brilliant! Thank you!
@pilotpawanc
6 ай бұрын
Tried every setting as is, the throttle didnt move an inch though in settings the bar moved...
@aerobloxgermany
25 күн бұрын
You need to restart the plane
@CaptianK
11 күн бұрын
Any idea why pmdg 777 when I moved the throttles from full to idle it also changed the flaps from 25 to 20… even tho the throttle has nothing to do with the flaps in settings..
@emreisldag2303
Жыл бұрын
Subscribed so instantly! Thank you for clear and concise explanations. Keep bringing us more contents like this.
@AirNOTT
Жыл бұрын
Thank you kindly! Maybe catch you in a live stream soon 🙂
@johnderperez
11 ай бұрын
Love the “agnostic” setup - makes practical sense!
@AirNOTT
11 ай бұрын
Tell that to the commenters 😅
@therealpoody7485
Жыл бұрын
Thank you for this. My only issue now is that I have to check reverse axis to make it go in the correct direction, whenever I'm out of reverse thrust my plane shoots forward for some reason, and everytime I exit the menu back into the game no matter where the stick is, it's always full power.
@DinoBroers
Жыл бұрын
You made the right video for me at the right moment. You saved me a lot of work! Thx, mate! 😎👍🏻
@AirNOTT
Жыл бұрын
No problem! Glad it could help 👍
@Skyramper
2 ай бұрын
Hello i have followed your tutorial regarding the set up of the TCA but what happens is the following.when i try to activate the reverse on engine 2 instead of reversing it goes full throttle.any chance to explain me what happened here?thanx in advance
@JYang365
Ай бұрын
Hiya, how do you do the hold button, then increase power one? Thanks.
@irishbigdan38
2 ай бұрын
For some reason my throttle randomly increases speed to full throttle when taxiing
@Benny_74
2 ай бұрын
Mine on the sensivity part it doesn't go smooth, in 3/4 of the thrust it just gives a jump to toga.
@galaxydrones
Ай бұрын
this worked but my throttle doesnt get to 100% it get to 70 % how do I fix it?
@samuelcv6565
Жыл бұрын
you are legend!!! ..great explanation, but can you tell me how the hell did you figure out that is button 12 and 16 :)?
@AirNOTT
Жыл бұрын
I forget where I saw it, a forum post months ago I think. Didn’t seem like many knew so figured I’d share
@Big_Sierra
8 ай бұрын
Sweet! Do the fuel cutoff switches work as well? If so, do you know what they’re actually called in Controls Options?
@AirNOTT
8 ай бұрын
It’s my understanding you need something like spad.next for that
@Big_Sierra
8 ай бұрын
@@AirNOTT Ok, thanks! Maybe I’ll fart around with that this weekend.
@ItzHussain
2 ай бұрын
My maximum throttle is only 60% when my throttle is at max
@MrHitchhicker
3 ай бұрын
My Axis is not in sync with the plane. When the TCA is in idle the throttle in the plane is still at about 25% What am i missing? Thanks!
@tar21man
Ай бұрын
Same here..did u solve this issue?
@Oven97
28 күн бұрын
There’s no throttle decrease for me how do I add that?
@chittychad18
29 күн бұрын
Doesnt work with 0-100 axis
@Zestflation
Жыл бұрын
Great video but I’ll never be able to afford it.
@dsfullframes964
3 ай бұрын
Why make it so complicated with the b747 and b737 etc etc, just make a new one and concentrate on b7373 , it's so fucking confusing tbh
@AirNOTT
3 ай бұрын
It’s really not lol
@Elijah-MS
2 ай бұрын
great video thank you so much, i have a question did anyone find a way to make use of the eng 1 & 2 levers aswell as the autobreak or are those just dead on the pmdg 737 and 777? i cant find a way to do it, thank you for any advice!
@AirNOTT
2 ай бұрын
I believe spad.next will help here. I’m planning another video on the topic soon
@aidenaviation
4 ай бұрын
Does the pmdg 737 still work properly if you have a side stick? (before anyone says just buy a yoke, I don’t have a lot of room and I don’t really want to buy one for 1 aircraft)
@AirNOTT
4 ай бұрын
Yeah you can fly with a side stick, I did for many months before getting the yoke.
@Flywithcraig
2 ай бұрын
Do you mind showing your binds for the Airbus add-on pack? Just got them and can't seem to get the spoilers to map correctly!
@AirNOTT
2 ай бұрын
All default I believe.
@CaptainCarter1
Жыл бұрын
Anyone else having the issue of the throttle decrease option not showing up? Help?
@AirNOTT
Жыл бұрын
You don’t have it filtering only assigned inputs? (on the left hand side of the screen)
@CaptainCarter1
Жыл бұрын
@@AirNOTT ohhhh… Thanks a ton!
@AirNOTT
Жыл бұрын
@@CaptainCarter1 no problem, happy flying!
@taffman1
Ай бұрын
Hello, got the levers set nicely, have you been able to set up the engine switches? I've been trying, but with no luck.
@AirNOTT
Ай бұрын
I have, but only recently. I did so using spad.next - there’s a recent video on the channel with the details
@MWcw709
3 ай бұрын
@AirNOTT have you ever run across where the 737 throttles with TCA Airbus become unresponsive? Like when you hit reverse it doesn't do anything no movement from the throttles in-game?
@yevafarn12
Ай бұрын
Absolutely what I needed to use my TCA Throttle Quadrant for the PMDG 777. Amazing thank you! New subscriber here.
@ttv.missyidiot
3 ай бұрын
Can you help me setup the Airbus TCA Throttle Quadrant for the A340? I'm using your settings for the 4 engines (and only dual throttles on the thrustmaster) but I cannot for the life of me get them in cl, flex togo etc. i'm going crazy here.
@dineshk2911
4 ай бұрын
Hi there, I am using Airbus throttles for PMDG 738 which is set up following your settings. I noticed when thrust reverse goes to idle thrust my auto brakes disarms. Would greatly appreciate your help on this. Thank you!
@paulburley2524
3 ай бұрын
Thanks again for your Boeing profile. I have bought the Black Square Turbine Duke and cannot set up my TCA Airbus panel to work properly with reverse prop pitch. Do you have any advice on this. Thanks Paul
@molotkovdmitry
6 ай бұрын
Hello! Thank you for your video. I did everything like you said but reverse thrust doesn't work... Idk why... Can you help me please?
@bobykim5311
8 ай бұрын
Thanks for the video. Just recieved my airbus trhottle quadrant but i have problems binding the right axis. IIn the windows device manager i have turned on the virtual buttons option. I copied a profile to PMDG. Once in the 737 i can move the throttle up and down and in game same happens until i activate the reverse thrust on the trustmaster quadrant, the PMDG throttles get stuck. Once i delete the binding in MSFS i cannot rebind the throttles as i can only bind buttons...Can you explain how you mapped engines 3 and 4 to the quadrant?
@joshuablakeman9829
Жыл бұрын
Thanks!! This helped me get my throttle setup.
@AirNOTT
Жыл бұрын
No problem! Glad it helped
@Markiiieu
23 күн бұрын
THANKS!
@PowerAirSimulations
5 ай бұрын
so when i uncheck my reverse axis to show like yours everything works backwards, but when i check my reverse axis then my reverse does not work?
@valet2972
7 ай бұрын
I did all you said in the video and it works but I have an issue where one of the levers on the 737 randomly rolls back without me touching it especially when setting toga thrust dont know whats happening anyone can help?
@kingbarnab344
11 ай бұрын
Everything else works fine but my throttles wont fo toga they get stuck at 89% thrust any known fix. I have copied your exact settings
@havoc23
2 ай бұрын
for the 777-300ER: It works fine until i actually go into Reverse, then i seem to stay stuck in reverse and cannot get out of it anymore
@AirNOTT
2 ай бұрын
Weird, I’ve heard people say the same but it’s not an issue I can replicate
@ShaeLenae
2 ай бұрын
im having the same issue. I'm hoping theres a fix
@Jalkur83
2 ай бұрын
I bought the PMDG-777 as my first Boeing or even Aircraft with an irl yoke a week ago and since then I was trying to set up my Thrustmaster Officer Pack and you are the first one to actually get it perfectly explained and working! Thank you so much!!!
@tonyevans2967
5 ай бұрын
Very good tutorial. As I am sure you are aware, you can adjust the sensitivity so that Reverse Thrust is not always at 100%, it can be graduated exactly as you want by where you put the levers in reverse thrust, exactly like the forward thrust.
@JoeyNewOFFICIAL
8 ай бұрын
Why does my rudder not work when twisting the sidestick, it has no movement for rudder
@gregstarjun
Ай бұрын
you can actually remove a little element out of the bottom of the throttles which can remove the detents
@AirNOTT
Ай бұрын
Yes that’s right, but I personally don’t find them to be annoying when flying Boeing and just push through them
@gregstarjun
Ай бұрын
@@AirNOTT that’s true, I’m interested to see how long I’ll have the due diligence to unscrew and replace the little thing at the bottom when switching aircraft types before I just push through them aswell 😅
@Fruit_popsicle404
7 ай бұрын
Reverse thrusters not working when i assign button 12/16. any idea whats happening
@matthewpavel1313
7 ай бұрын
Same. It was working before and suddenly it stopped working. Any fix @AirNOTT ?
@AirNOTT
7 ай бұрын
No idea! Mine still works fine, sorry!
@FernandoNuno100
4 ай бұрын
Very efficient. Functional. Tanks
@TheCirrusflyer
2 ай бұрын
Great, I'm using the TCA Airbus pack with Boeing - very happy with the setup but your video really helped me set it up correctly! Thanks so much....
@AirNOTT
2 ай бұрын
Great to hear!
@nickhill6020
Ай бұрын
After watching 20-ish different videoes, finally I found one that makes sense.... and works first time. Thank you. 😁
@AirNOTT
Ай бұрын
Glad it helped!
@devinconway4512
8 ай бұрын
ABOUT THE DETENTS!! If you want to remove them, you can find 2 plastic pieces under the quadrant held in with two screws each. They are right under the actual levers themselves. You can un-screw these and remove the detents as a whole. When you want them back, just simply screw them back in. The ridges should be facing up towards where the levers would be at 100% throttle
@AirNOTT
8 ай бұрын
Yep, very true. Though i switch between Boeing and Airbus quite a lot so it may get annoying switching them out
@person_147
2 ай бұрын
Works great on the tfdi md11!
@adrianbeadell9149
11 ай бұрын
Hi, great vid many thanks. Do you have you engine buttons and engine crank switch setup at all with the 737?
@steve8219
6 ай бұрын
This is so much helpful! The default only work for an Airbus, not 738. Love it! Thank you!
@francescobertezzolo9239
10 ай бұрын
I've found your video a lot different from others on KZitem, specially thrust and reverse setup and sensibility. In any case i'm testing it now. I'd like too a way to use the Eng on/off of Tca Throttle quadrant for cutoff option ( when reaching 25%), do you believe possible? Many and many thanks
@AirNOTT
10 ай бұрын
I haven’t tried it, though I wonder if spad.next could help. I’ll make a video on it if it’s turns out well
@fynn4880
5 ай бұрын
Why i've got the problem that my boeing is only going into "idle" thrust reverse? I think i've done everything like you explained in the video :(
@bosanac8358
3 ай бұрын
Same here, got the same problem
@kevinfiranda
6 ай бұрын
How to set reverse on the throttle axis?
@foster6352
4 ай бұрын
Good job !! Thank you too much !!
@Off.Richard
10 ай бұрын
I have the bigger airbus throttle pack with the speedbrake and flaps etc however the auto brakes and as you may have noticed engine starters dont work on the boeing and if it does I haven't found a way to do it
@AirNOTT
10 ай бұрын
I keep meaning to try spad.next to see if that can hook in with it
@Buttachopper
11 ай бұрын
Hey man just a question will this mess up the settings for the Fenix if I switch back to the Fenix?
@AirNOTT
11 ай бұрын
If you make a profile for the Fenix and a profile for the Boeing you should be able to switch between them without them conflicting
@mortenhansen130
7 ай бұрын
Thank you! Helped me alot! :)
@jackwong1013
8 ай бұрын
That works perfectly for me on PMDG 737 and Horizon 787-9, thanks and Happy 2024!
@AirNOTT
8 ай бұрын
Glad to hear it. You too!
@k.precht6849
2 ай бұрын
Thanks a lot for this video. I tested it for the PMDG 777/Msfs and it works. One Question. Did you also have a instruction for the engine start with the Thrustmaster Airbus TCA?
@AirNOTT
2 ай бұрын
No, but that’ll be coming soon. Got a video planned with spad.next
@tar21man
Ай бұрын
@AirNOTT I tried doing the same as per your video for thr pmdg 777 but when my tca is at idle,the throttle in the pmdg777 is at around 25 percent throttle...any fixes please? Love the videos.❤
@ivo1707
11 ай бұрын
Do you have any ideas for Boeing throttle setup for airbus?
@AirNOTT
11 ай бұрын
Afraid not, never had the Boeing throttle. Sorry!
@F.A.S.D
Жыл бұрын
Oh my god ive been looking for this I want to buy one but im just in deep doubt that it will work with boeing thank you so much i sir im subs
@AirNOTT
Жыл бұрын
You’re welcome! Thanks for the sub 🙂
@LMH01cannal
8 ай бұрын
Nice Video, I almost got it working, however the reversers in the aircraft gets stuck (id say about 20 percent extended) when I enable reverse thrust on my physical throttle. I did bind Buttons 12 and 16 to Thottle 1/2 Decrease. The only way I can unstuck it is by manuelly resetting the thrust reverse levers inside the aircraft. Did something similar happen to any of you and does anybody know how I can fix that problem? Maybe there is a setting inside the aircraft that I missed?
@Marco-vp1fy
8 ай бұрын
I managed to work around this by mapping button 12 and 16 to Throttle cut, but only on Button Release (instead of Button Press).
@LMH01cannal
8 ай бұрын
@@Marco-vp1fy Thanks for your reply, but the Issue has actually fixed itself: It seems that the thrust reverse freeze only occurs on ground / when parking. I have flown about 3 approaches and it worked everytime without a problem.
Ай бұрын
thank you
@AirNOTT
Ай бұрын
You're welcome
@HanselWozniak
8 ай бұрын
Thanks! This helped me a lot, not only for Boeing but other aircrafts without detend and having a more fluid throttle
@EAbe1208
8 ай бұрын
wow, thank you so much. It works perfectly.
@AirNOTT
8 ай бұрын
Glad it helped!
@yams900
Жыл бұрын
Thx for sharing ! I thought you've done one of these videos in the past..anyway, must check your approach :)
@AirNOTT
Жыл бұрын
I spoke about it briefly in my setup tour, but never went into the details of setting up the finer details. Thanks for watching!
@Cloud.Cruiser
8 ай бұрын
Does anyone know what the button 12 and 16 would be on xbox
@Marc1999th
Ай бұрын
no unfortunately I am also looking for that... did you find an answer??:) would be much appreciated
@Ali271194
7 ай бұрын
i have the issue that my throttle isnt using the full length of the quadrant, idle position on the quadrant is in the sim at 30-40%, full reverse on the quadrant is idle in the sim how do i fix this?
@stepfordgames5096
7 ай бұрын
You need to calibrate your throttle in the aircraft.
@Ali271194
7 ай бұрын
@@stepfordgames5096 you cant calibrate in the PMDG
@Airmackem
Жыл бұрын
Great video yet again sir. 😊
@AirNOTT
Жыл бұрын
Cheers! How’s that internet holding up?
@Airmackem
Жыл бұрын
@@AirNOTT we managed a stream this morning and tonight without any problem so fingers crossed it’s fixed.
@businesswoofer
Жыл бұрын
doesnt work at all man, for me when i go back to idle the reverse move a notch and then get stuck. Same exact settings as yours
@AirNOTT
Жыл бұрын
You’ve set the sensitivity curves too? Make sure you don’t have any other controls mapped to the throttles also
@businesswoofer
Жыл бұрын
@@AirNOTT yeah set the curves and no others are mapped to the throttle
@theflightsimulationexperie6894
9 ай бұрын
massive thank you
@liquitech1
10 ай бұрын
Simple but effective video. As they should be my friend. This works like a charm. Bravo!
@AirNOTT
10 ай бұрын
Awesome! Happy flying!
@SplitNotion
Жыл бұрын
Do you know if flying the 737 with the airbus joystick would work instead of the yoke?
@AirNOTT
Жыл бұрын
I used to fly 737 using the stick for several months before getting the yoke
@SplitNotion
Жыл бұрын
@@AirNOTT So it works fine then?
@roberttresland1545
6 ай бұрын
Brilliantly good explanation. Thx
@AirNOTT
6 ай бұрын
Thanks, Robert!
@antikuo
Жыл бұрын
Thank you so much, super effective and well explained! Saludos from Spain!
@AirNOTT
Жыл бұрын
You’re welcome!
@gianc60
6 ай бұрын
Tks !!
@HashtagFelix
Жыл бұрын
New Vid who this!
@Capone78
Жыл бұрын
Do you have the Fenix. Having issues with the calibration
@AirNOTT
Жыл бұрын
I do indeed.
@Capone78
Жыл бұрын
@@AirNOTT having issues with the detent on rev/idle. It seens to be same
@LilBobbyWT
11 ай бұрын
What if when I plug it in pc it says the Last USB device you connected malfunctioned and Windows does not recognise it? Please help
@AirNOTT
11 ай бұрын
Try a different usb port? Make sure your drivers are up to date. Your unit could also be faulty I guess
@LilBobbyWT
10 ай бұрын
@AirNOTT it was the unit thanks for help
@paulburley2524
Жыл бұрын
Thanks so much, I would never have figured this out by myself.
@AirNOTT
Жыл бұрын
No problem, glad it helped 👍
@WestWind93
10 ай бұрын
Thats very helpful, thank you.
@AirNOTT
10 ай бұрын
Glad it was helpful!
@jjstevenz
9 ай бұрын
this is everything ty
@TiTaniumGamesOn
10 ай бұрын
THE BEST VIDEO ... I LOVE YOUUUUUUUUUUUUUUUUUU MAN
@AirNOTT
10 ай бұрын
🫡
@Froug332
Жыл бұрын
Does this work with the yoke too ? For the 737 -800 cause recently got one
@AirNOTT
Жыл бұрын
The Boeing yoke would work alongside airbus throttles without issue, if that’s what you mean?
@Froug332
Жыл бұрын
Yea beacuse I do want the airbus thrustmaster soon @@AirNOTT
@ppwm56
11 ай бұрын
Thanks, great instruction video!
@kingofspodnekaty9969
Жыл бұрын
reverse thrust does not work for me with those settings and sensitivity
@AirNOTT
Жыл бұрын
And you did the button 12 / 16 thing?
@kingofspodnekaty9969
Жыл бұрын
@@AirNOTT yes
@mrtai4503
Жыл бұрын
Can confirm this works! great videos!
@AirNOTT
Жыл бұрын
Thanks! Glad it worked out for you
@jbatz9954
Жыл бұрын
do you have any settings for the airbus tca joystick for the 737
@AirNOTT
Жыл бұрын
I don’t thing I made any changes to the stick beyond the defaults. What are you struggling with?
@jbatz9954
Жыл бұрын
when i try to use the the airbus sidestick whith the 737 the yoke won't move
@jbatz9954
Жыл бұрын
also whe i try to put the revers trust to idle it won't go to idle and in won't go full revers and once i put it to reverse it won't go to idle
@jamieaviation
Жыл бұрын
Tried so many tutorials for this issue! Found one that semi worked but not happy with it. Never seen it done like this before. Look forward to trying it when I get back!! Thanks as always 😁👍🏻
Пікірлер: 197