Nice to see someone actually demonstrate how this is done instead of just telling you to use the foot and act like it’s magic
@abiyo506
5 ай бұрын
right i never knew how to do this
@user-sq8ug5ct1m
3 күн бұрын
Yes and slow enough that you can follow
@foreverNwonder
5 ай бұрын
I appreciate these videos that show EXACTLY what to set your sewing machine to… cos I’m a straight idiot who totally forgot how to do anything if I haven’t done it in awhile. Which for me, it’s been over 10yrs.
@rabbit0664
2 ай бұрын
Hey you're not alone with that.
@SAJK0KAT
2 ай бұрын
I’m here too because of that. I thought I was losing my mind 😂
@carolinareaper8089
15 күн бұрын
❤❤❤❤ love for mentioning the stitch, the width and tension for the sewing ❤❤❤ no one ever mention it !
@danielkwok1837
2 ай бұрын
#### That's GOLDEN for beginners! 😲👏 *Could you make a video or short to explain what "length", "width" and "tension" refer to?* Like varying each one of them in turns and show the audience what the changes of result one gets? 😋 THANKS! 💐🤗
@cremebrulee4759
2 ай бұрын
Yes, please!
@eileenbunch6747
5 ай бұрын
Pls show how to turn a corner with the rolled edge foot.
@knittingknut
5 ай бұрын
After a while the scroll part stops curling the fabric. You stop and adjust and that section looks like crap when you inspect it later. Works for short runs but if you have a really long hem - well good luck I certainly haven’t been able to get it to work consistently.
@wendowslive
5 ай бұрын
Same here xd. Have been sewing for over 10 years now and still cant get it to work. I prefer serging the edges first and use that as a guide for the rold hem and do it all by hand. I have way more control over it that way, especially with a curved hem with a circle skirt for example.
@SalTheCat
5 ай бұрын
I had the exact same experience... extremely frustrating
@updownstate
3 ай бұрын
My biggest problem was corners, which I still have trouble with on some fabrics. So I do them by hand. Otherwise I love thing.
@fionaneale3784
24 күн бұрын
Been sewing professionally for over 30 years. That foot does NOT work. In a factory, they use a huge, far more complicated foot to achieve consistent results. Also it's almost impossible to sew from the very beginning of the hem. Far easier to do the 2 stage method of a rolled hem.
@blowitoutyourcunt7675
20 күн бұрын
@@fionaneale3784now I'm off to go hunt to find out what that looks like on a commercial machine because I'm curious!
@megancooper6130
2 ай бұрын
You explain things better than any sewing machine CD
@saraaronzon4562
5 ай бұрын
It’s nice to hear a voice rather than annoying music!
@updownstate
3 ай бұрын
The hem foot on my 1929 Singer works great! Saves a lot of time too.
@cherylbennets343
5 ай бұрын
I’ve an Industrial machine as I’m a Dressmaker & you just cut the corner & it’s easy to feed into the foot when I was a junior working in a factory that was my job hemming 😂
@scottgray6276
5 ай бұрын
If you stitch onto the edge of your fabric, you can use the thread tails to pull the edge through the foot, without trying to pre-roll it!
@romonaelrod7870
4 ай бұрын
This would be great for blouses,scarves and doll clothes.
@TheTerriw31
10 күн бұрын
Finally I see how this should be done !! Thank you
@lauraseale8520
5 ай бұрын
I always snip a 45° corner off the start of the material and feed it through the foot.
@marierodd9451
5 ай бұрын
Love your videos!! What caught my attention, initially, is that you are using a machine identical to mine. 😅❤
@gabriel.gabrielle
6 ай бұрын
I didn’t know you could use it farther from the edge like that!
@nineredberries
5 ай бұрын
Thank youuuu!
@joannawoolley6007
5 ай бұрын
Excellent! Keep the tutorials coming x
@kimlinford3484
5 ай бұрын
Thank you!
@snowletsh5759
Ай бұрын
Ahh I can’t save to my playlist!! 😭😭😭. Thanks for the video!!
@lindalardner3745
Ай бұрын
Me neither sadly
@oakleyanderson6183
5 ай бұрын
I had no idea this existed. Thanks for making this video ❤
@claricebridges2436
2 ай бұрын
Hem foot? Who knew! Thank you for introducing and demonstrating. ❤
@h0n3ybr0wn016
Ай бұрын
Thank you 🙏🏽 so love this
@ChavezAmtz
2 ай бұрын
That’s so cool!!
@tomobedlam297
6 ай бұрын
Very professional. I will give this a try. 👍
@hannona1982
Ай бұрын
Thanks alot you cann't imagine how it help me and so useful for me❤
@evam4182
26 күн бұрын
I just started sewing like three days ago and WHAT 😮❤
@bj.6030
6 ай бұрын
Thanks 🎉😊
@PrettyInnovatory
4 ай бұрын
Beautiful! Thank you!
@cremebrulee4759
2 ай бұрын
Excellent! Thank you!
@dar4835
5 ай бұрын
Suhweet! Thank you for the tutorial. I've just got a new machine, and I want to learn how all of the feet work.
@brendaburgner-williams8515
5 ай бұрын
I have a brand new Brother. It worked for a bit. I made two quilts, a pillowcase and fixed a baby blanket for my grand niece. The tension stopped working properly. The thread is loose and happy looking. I never touched the tension knob! I have tried everything. The tension still won't work right. Ideas?????
@actualangel5133
5 ай бұрын
I'm having same trouble with singer machine... only one tension works..that too on cotton fabrics...tried all combinations but won't stich nylon, thick cotton or silk ..wasted lot of cloth....🙆♀️ Please help .. I'm at my wits end..losing interest in sewing.
@barbaragill5703
4 ай бұрын
What sewing machine did you demonstrate on?
@bboice08
2 күн бұрын
Thank you🎉🎉I think I have that foot and will try🎉🎉🎉🎉
@FashionSense518
Күн бұрын
Nice!😊
@rendaowe
2 ай бұрын
Awesome, thanks!
@dorismays2448
5 ай бұрын
NICEEEEEEEEEEEEEE❤❤❤❤
@gabsi77
4 ай бұрын
Everyone makes this look so easy and no matter how many tutorials ive watched i still can't get it 😅
@emorysumi
4 ай бұрын
Omg can you please do a video on how to use the foot on chiffon and do a 1/8 baby hem? It's driving me crazy at the moment 😅
@Woodlawn22
2 ай бұрын
Just saw a guy hemming chiffon. He marked a line to follow about an inch from edge. Then, using a very narrow and fairly short zigzag setting, he zigzagged along the line over a strand of topstitching thread. He held the topstitching thread up at about a 45 degree angle. Then he pressed the 1" of fabric to the inside along the line. Then he zigzagged over this crease, pressed again, and trimmed away the excess fabric very close to the stitching. A tiny, tiny hem! Hope this helps you!
@wingzofice
6 ай бұрын
I have trouble with using that foot across a seam. The rest of the hem looks nice, but going over a seam looks terrible!
@adaiyah-zyahudah9890
3 ай бұрын
Ty.
@hermajesty52
4 ай бұрын
Beautiful
@liliaalesan8201
2 ай бұрын
Good video..
@moniquem8093
4 ай бұрын
I would love to learn how to sew a summer dress. Its to intimidating though.
@viviannefraser5974
2 ай бұрын
Thanks for this I’ll definitely try it! I had tried on my own and couldn’t get it to work🧐
@huntress827
5 ай бұрын
I have been sewing way to long to not have known about this foot. At least I got really good at hemming with a normal foot though.
@SacdiyaAadam-ui8hd
2 ай бұрын
Wowww
@yvonnetootsie8702
5 ай бұрын
❤❤❤
@vickiel914
4 ай бұрын
I have such a hard time using a rolled hem foot. I keep trying though.
@OfficialLadyDarkSky
3 ай бұрын
jessica i have the same machine you do, how did you get the metal instead of the plastic holder for the foot
@aimeebrewer7175
6 ай бұрын
Could you use this with lace, and feed dogs that can’t be lowered?
@actualangel5133
5 ай бұрын
What's feed dog?
@aimeebrewer7175
5 ай бұрын
Feed dogs is a term used to describe the feed teeth that move the fabric when stitching. Sometimes the feed teeth are fixed on sewing machines and you can't lower them, or there aren't any cover options available for the machine (as is the case with the White sewing machines from the '90s).
@GabannaAmor
Ай бұрын
😍
@DrFumblesMcStupd
5 ай бұрын
Such a good tip, I've tried the stitch and pull the thread through and that never works
@markusmulder_
5 ай бұрын
Where it gets very tricky is on round curves or pointy edges 😕
@areschloch1846
Ай бұрын
Still doesn‘t work for me, after a while it unrolls each time, i bought a set of six… now i use an iron and the foot with the leading edge
@haseenabanu8050
4 ай бұрын
Which machine u r using?
@curious_eff8244
5 ай бұрын
Hi! What’s the name of your machine please?
@doralevitt2879
4 ай бұрын
Is this foot only for Singer machines or can I get one for my Kenmore??
@joanbeeldens6131
5 ай бұрын
Ive tried using the foot many times it never works for me
@leenaravikumar5242
4 ай бұрын
Use zigzag stitch. It will look prettier
@eclairlu7586
2 ай бұрын
Is this the same with a circle 🫠
@Jack-j8g
7 күн бұрын
Fuck yes
@Lic.en.derecho
5 ай бұрын
❤❤❤❤❤do brother presser footd fit singer machines?❤❤❤❤❤
@FancyRPGCanada
5 ай бұрын
Where do you get a foot like that?
@actualangel5133
5 ай бұрын
Amazon
@afterdark25
4 ай бұрын
Neat
@purpleblorb
5 ай бұрын
Wish i could use it but the foot costs $70
@AH-ux6kk
5 ай бұрын
Or use a magnetic guide
@actualangel5133
5 ай бұрын
What's that ?
@MajClanger
5 ай бұрын
Meh. You sew a hem when the garment is finished - so how do you get to the end when it's in a circle?
@kiira7493
4 ай бұрын
I swear i am not master in sewing but i think im not that bad but never ever i could use this foot it is just a mess
@aqsatasleem1532
3 ай бұрын
Hey sister ... is your figure fine now ??? It feels like injury is intense .
Пікірлер: 88