Here's a link to the AWESOME scraper that I use on a daily basis! amzn.to/2Rt7HR4
@MrSeminole77
Жыл бұрын
agreed- the .60 is more versatile than the .80
@DanCanning
Жыл бұрын
For the first time ever I have managed to get shaving off of my scraper, thanks to this video. Thank you!
@zumkellerwoodshop4224
2 ай бұрын
That is awesome!👍
@kurtgoodwin9490
2 жыл бұрын
Good video. I like the use of the marker to ensure it’s bee touched uniformly. Have done that with cleaning up table saw sled runners too. It’s like using xylem blue in machining metal
@FlaminChicken231
Жыл бұрын
THANK YOU for making a quick, easy, and most of all, STRAIGHTFORWARD guide. so much better that all of the 15 minute videos with midroll ads and sponsors that interrupt the video
@christopherbeyer9614
7 ай бұрын
Great video, to the point.
@mrtablesawful
5 ай бұрын
This is a terrific and helpful video. Thank you! You've earned a subscriber.
@Greebstreebling
5 ай бұрын
Brilliant, works much better than my previous method. It's quite surprising how little pressure you need to make the edge. I used the round chrome stem of a screwdriver. I also found that 1000 grit seemed to work fine as the finish. Thanks for posting. BTW the oil is essential as otherwise the metal edge tends to rip.
@dframed9305
Жыл бұрын
I love my scrapers. They leave the wood looking bright and feeling very smooth. Whereas heavy to medium grit sandpaper leaves it looking dull sand feeling fuzzy. It took some time for me to learn the proper way to sharpen one. Not everyone does it the same. And some books show the scraper being burnished at a 90 degrees. It puts a burr on both sides.
@genekatauskas6904
Жыл бұрын
Nicely done 🔨
@naninano8813
2 ай бұрын
the other day i was listening to 'every tool's a hammer' by Adam Savage and he mentions these things. never knew they existed
@DJJustice327
4 жыл бұрын
This is excellent. Will definitely be adopting this.
@zumkellerwoodshop4224
4 жыл бұрын
Right on! I'm glad I could help👍. If you have any questions dont hesitate to ask. Thanks for watching!🙂
@AP-kl3qe
Ай бұрын
Nice video. Do you have a source for the small burnishing tool you use? I can only find large ones in stores
@zumkellerwoodshop4224
Ай бұрын
@@AP-kl3qe Thanks! The smaller one I use in the video is online from Lee Valley.
@dimensionswoodworks
2 жыл бұрын
Essentially the same as many other videos, but VERY WELL DONE 👍🏻
@robertdemon3550
2 жыл бұрын
I love it when you get big curly shavings, I’m a bit hit and miss when it comes to burnishing the card scraper.
@ismaelgonzales1694
3 жыл бұрын
Cool just learn something thank you very much
@zumkellerwoodshop4224
3 жыл бұрын
Thank you for watching! I'm glad I could help!
@alkssmith9762
2 жыл бұрын
Awesome, thanks!
@ZedEh
3 жыл бұрын
Watching this for the second time, because it just popped up in my feed today! Nice video brother 👍👌
@zumkellerwoodshop4224
3 жыл бұрын
Thanks man! I hope you found it helpful!
@rickschuman2926
2 ай бұрын
You might say somethingabout what sort of file you used and that scrapers need to work with grain in the same way planes do.
@Greebstreebling
Ай бұрын
That's an interesting comment. I make lute ribs from pieces of yew which I plane down to 1.5mm thickness. Planing areas where the grain switches direction causes tear out, so I use a scraper instead. They can be used very effectively against the grain :)
@zumkellerwoodshop4224
Ай бұрын
@Greebstreebling I agree. The scrapers are my go to for working on tough grain.
@ethanrobertson8921
4 жыл бұрын
Excellent!
@zumkellerwoodshop4224
4 жыл бұрын
Glad you liked it!
@hawkercnc8261
2 ай бұрын
Why do you not push the burr out on both sides so that you have two edges on each sharpening session or did I miss something or would this not work?
@zumkellerwoodshop4224
2 ай бұрын
Absolutely, you can do that. And you should.
@GM-gc8gg
3 жыл бұрын
If you want a truly simple method of sharpening the scraper, just use it after you file it. After all, the filing process raises a burr. That's why you're stoning the faces after filing: to remove the filing burr. The filing burr is actually sharp enough to raise shavings. If you don't believe me, try it, it works just fine. The only time I use a burnisher is to sharpen a scraping plane iron.
@zumkellerwoodshop4224
3 жыл бұрын
Thanks for watching! 🙂 I have used the scraper after filing and it works just fine. I use the stones as it helps get a cleaner cut. Right off the file it cuts but tends to leave long lines in the wood. At least that has been my experience. They usually show up when finishing. Using the stones helps get finer "teeth" and leaves a cleaner finish. I find it lasts longer before it needs to be sharpened again too (just my experience). It really depends what you are using the scraper for as to how much effort you want to put into honing it👍
@dwcrusso
2 жыл бұрын
Stupid question, but I assume when orienting the scraper you are cutting opposite the angle you create with the Burr?
@Philadelphia19147
2 жыл бұрын
So simple. Yea
@sethsballs8479
2 жыл бұрын
Wish I knew this before! Unfortunately mine were left out in a dusty shed and got rusty but they should still work find for what I need
@dodgersfnshepard8673
3 ай бұрын
Where'd you get that case for your scrapers?
@zumkellerwoodshop4224
3 ай бұрын
I believe it is called a "cabinet scraper case" at Leevalley.com
@horsetowater
7 ай бұрын
Tgankyou
@RemarkableWoodworks
4 жыл бұрын
What’s that Huile stuff?
@zumkellerwoodshop4224
4 жыл бұрын
Thats just 3 in 1 oil from canadian tire. Probably should have filmed the English side😋. Any kind of oil will do though👍
@toonybrain
4 жыл бұрын
Remarkable Woodworks “Huile” is just French for oil
@briholt100
Жыл бұрын
hmm.. You mention simple, but I've never seen any other way of sharpening a card. What are other ways of doing it?
@johnterdik4707
8 ай бұрын
Do you have a source for the card scraper pouch? I've been putting my scrapers in a drawer and this method is far from the best.
@zumkellerwoodshop4224
8 ай бұрын
Lee Valley cabinet scraper case. It's available for order on their website.
@johnterdik4707
8 ай бұрын
Tks, I just placed my order.
@dframed9305
8 ай бұрын
One thing is for sure. Sandpaper dulls the wood whereas a card scraper keeps the wood looking natural.
@pauleohl
3 жыл бұрын
Will the sharpened scraper remove an existing finish?
@zumkellerwoodshop4224
3 жыл бұрын
Absolutely! I have done this many times. It will quickly remove the finish where a sanding disk would get gummed up. This is where it pays for itself in my opinion.
@grlygirl1264
3 жыл бұрын
Why don't these come already sharpened??
@zumkellerwoodshop4224
3 жыл бұрын
The burr can be fine tuned for the type of work you are doing. Typically they come with a squared edge so that they can be "honed" by the user. The burrs don't last all that long so being able to sharpen them is an essential skill, even if they did come with a burr already on them. Thanks for watching :)
@Γ.ΠΑΠΠΟΥΣΜΟΥΣΙΚΟΣ
2 жыл бұрын
very dood video. i make music instruments (boyzoyki greek) an i use sharpen very mach
@Christopher_Giustolisi
2 ай бұрын
would be a good video if you dropped the annoying backround music. Not everything needs music. When there´s no value in adding it, just don´t.
@NippyKindLangur234
2 ай бұрын
Poor little guy has to endure some background music 🥺🥺🥺 You sound like a massive Karen
@Christopher_Giustolisi
2 ай бұрын
@@NippyKindLangur234 It´s just some objective criticism. No need to feel triggered. Feedback is important and before adding something a creator should ask themselves "does this add any value?". Many experienced youtubers have already talked about this and there are you with a comment that provides no value at all.
@NippyKindLangur234
2 ай бұрын
@@Christopher_Giustolisi hahaha bruh you're the one triggered by a bit of background music lol. Also freakin lmao what kind of person thinks their OPINION is "objective". Perhaps look it up in the dictionary, because in my opinion you're a bit too big for your britches 😹😹
Пікірлер: 55