Previous Video ▶︎ • Cast vs. Forged Wheels...
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
In this video, I not only show you guys that I picked up a 4-piston BBK for my Nissan 240sx, but I also take you with me as I refinish the brakes, remove the imperfections on the caliper, and paint everything so it looks AMAZING!!!
SHAVING STAGE
Carbide Milling Bits ▶︎ amzn.to/2AXyMog
DeWalt 20v Drill Max XR Kit ▶︎ amzn.to/2jmxf0X
DeWalt Safety Glasses ▶︎ amzn.to/2krF497
3M Professional Multi-Purpose Respirator ▶︎ amzn.to/2B6muug
Dremel Kit ▶︎ amzn.to/2ktBXNJ
3” Griots Garage Dual Action Polisher ▶︎ amzn.to/2BR9S7s
3M Sanding Disc 80 Grit ▶︎ amzn.to/2i52koQ
3M Sanding Disc 120 Grit ▶︎ amzn.to/2j6rqVv
PAINTING STAGE
3M Automotive Masking Tape ▶︎ amzn.to/2jln9O0
Olfa 9mm Stainless Steel Utility Knife ▶︎ amzn.to/2kw3dvm
Rustoleum High Heat Primer ▶︎ amzn.to/2AXNpI1
VHT Caliper Paint ▶︎ amzn.to/2AYtLMg
VHT Clear Coat ▶︎ amzn.to/2kqz00C
NISMO Stickers ▶︎ amzn.to/2jlOgZb
BBK PARTS
Z32 300ZX 4-Piston Aluminum Caliper (Front-Driver) ▶︎ amzn.to/2ksze7t
Z32 300ZX 4-Piston Aluminum Caliper (Front-Passenger) ▶︎ amzn.to/2B5M8iV
Slotted & Cross Drilled Brake Rotor & Pad Set ▶︎ amzn.to/2BONkEj
P2M Stainless Steel Brake Lines for Z32 300ZX Calipers ▶︎ amzn.to/2B6j5vA
Z32 Brake Hardware Kit ▶︎ amzn.to/2kqTvKH
Camera Used for this Video ▶︎ goo.gl/C1mN2C
I’m waiting for a few more parts to come in for the install, but as soon as they arrive, I will be installing these brakes, I’ll make a comparison between the two setups, perform a test to see which is actually better with numbers, and show you what is needed in more detail.
These brake calipers are made out of aluminum, so if any area of the caliper isn’t painted, it isn’t a big deal as it will not rust. Nissan made the same version of these calipers out of steel, and those need much more attention as any are that is bare steel will rust and begin to corrode as soon as it comes in contact with oxygen (& water, & salt). So take your time to paint your brakes and protect them from the elements. If you’re looking to do this to your Audi, Honda, Subaru, or whatever brakes you have, instead of picking up the Nismo stickers as I did, pick up your appropriate one, and then install them before you spray on your clear coat.
If you have any questions, feel free to send me an email at milanmastracci@gmail.com. Thanks for watching!! :)
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
Please give it a like 👍 and follow 👣
milanmastracci KZitem Channel ▶︎ / milanmastracci
milanmastracci Facebook Page ▶︎ / milanmastracci
milmast Instagram ▶︎ / milmast
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
Music provided by Argofox:
Ghost'n'Ghost - Lighthouse
• Ghost'n'Ghost - Lighth...
Негізгі бет How to Shave and Paint Your Brake Calipers
No video
Пікірлер: 526