The red button is a 12-volt momentary switch. It can be used for a trans brake, nitrous or line-lock activation or nearly any 12-volt powered accessory that you can think of. It does not have to be hooked up but the button will be on all Hurst Quarter Stick Shifters. If you have any additional questions about the Quarter Stick or any other Hurst performance parts just give us a call at 707-544-4761. - Jason @ Hurst
@andywahl9202
6 жыл бұрын
Can you skip a gear on an agressive shift with a quarter stick? I know shifters such as the Mega shifter you cannot but I didnt know if this had the same mechanism.
@HurstPerformance
6 жыл бұрын
No, you cannot skip a gear. The Hurst Quarter Stick is a racing shifter, so the trigger on the Hurst Quarter Stick must be actuated to allow the shifter to go to the next gear (when going from low to drive) to prevent unwanted gear changes/misses. Unlike the B&M Racing Mega Shifter, which is a "ratchet style" shifter, the Hurst Quarter Stick is a "gated style" shifter. For additional information on how the Hurst Quarter Stick operates check out the link, I posted below. You can always give us a call at 707-544-4761 for an answer to your questions. - Jason @ Hurst
@waynehorsin7457
6 жыл бұрын
Could you change the gate on this shifter to a 4 speed gate and make it compatible with a 4 speed transmission (700r4) ?
@HurstPerformance
6 жыл бұрын
Unfortunately no, the gate plate on the Hurst Quarter Stick Shifter is welded in and is not serviceable. The Hurst Quarter Stick (either traditional shift stick style or pistol-grip style) is not designed to work on a 700R4 application. The majority of our Hurst shifters are geared towards manual transmissions, you may want to take a look at what our sister Company B&M Racing has to offer. If you like the look of the black Hurst Quarter Stick Pistol-Grip, B&M Racing offers two similar looking shifters. Head on over to B&MRacing.com and search for part #'s 81052 & 81120. Both of these shifters are designed to work with the 700R4, both options are black, anodized pistol-grip shifters and both will arrive with all the hardware, brackets and levers that you will need, no additional parts are necessary. Other than looks both shifters are very similar. The biggest difference between the two is part# 81052 is the B&M Racing Pro Stick and this shifter is a gated style shifter just like the Hurst Quarter Stick. Part# 81120 is the B&M Racing Pro Ratchet and this is a ratchet style shifter. I have included a KZitem link below that details the Pro Ratchet Shifter. If you have additional questions please give us a call at 707-544-4761. Part# 81120 kzitem.info/news/bejne/r5truYWNs4OUnKA - Jason @ Hurst
Пікірлер: 6