"the way this one landed is kind of goofy" thanks for making me laugh 🤣🤣 cool video
@Lifes_Apprentice
2 жыл бұрын
No problem!
@patrickpeterman8736
11 ай бұрын
WHAT SEALANT DID YOU USE AROUND THE STORM COLLAR?? A FURNACE FLEU PIPE CAN GET HOT; SOME SPECIAL HEAT RESISTANT SEALANT; GREAT VIDEO,S LEARNING AND LEARNING MORE THANKS PJP SORRY ABOUT THE CAPS !! KEY BOARD IS MESSED UP!!
@pollackroe8566
Ай бұрын
Thanks..! I know you just want to get the job done...but for you to take the time and help others....well that right there shows you are a ''Class Act'' very rare these days.......
@Lifes_Apprentice
Ай бұрын
Thanks!
@brianpanks5846
Жыл бұрын
You should have added a scrap piece in that row above that exhaust pipe and then ran a full shingle to cover that pipe flash. There should never be a seam on top of that flashing for that exhaust pipe,that seam should have been moved to one side or the other of that exhaust flange 💯💯
@Lifes_Apprentice
Жыл бұрын
how is it wrong to have a keyway above a flashing? what if you have a 4 foot boot? You gonna make special shingles so you dont have a keyway above it? lol your trolling bro If you think that you have not done much roofing because there are so many situations you do not have a choice. large chimneys rubber roof tie ins etc
@tannerbarlow6888
11 ай бұрын
No way! I love watching Zach’s videos
@Mr76522
11 ай бұрын
Thank you for this video. It really helped me.
@michaelirizarry3831
Жыл бұрын
That’s the proper way to do it, a lot of roof leak with time because they only use caulking to keep water away but u need to keep in mind that caulking shrinks
@brianstarkey1824
Жыл бұрын
Thanks for the video I am doing this for the first time today on my own roof. This answers a lot of questions I had on how to attack these exhaust vents. I like the ice and water shield idea I’m also going to do that on mine.
@Lifes_Apprentice
Жыл бұрын
Happy to help
@Oneklickmedia
11 ай бұрын
Same I did temp patch but I want to replace that vent and Re shingle . This help
@jonnybegood14
9 күн бұрын
Right on. Thank you
@wrightsrrt871
5 ай бұрын
I like the snow and ice membrane trick I'm use to using calking as well but ill be doing it that way from now on seems easy enough!! Thanks
@hhprogressiveconstruction1140
3 жыл бұрын
It won’t hurt adding that weather watch but honestly must leaks come from those galvanized pipes rusting on collar or boot . Those shingles covering around are just as good since the shingles seal themselves . Hopefully you got the dumpsters business to provide disposal of the old shingles .
@Lifes_Apprentice
3 жыл бұрын
we were in indiana filming with another youtuber so we were using his dump trailer
@danahasson2892
3 жыл бұрын
Justin you might turn me into a roofer, nah I will just stick to the tear offer.
@Lifes_Apprentice
3 жыл бұрын
the tearoff is definitely roofing!
@danahasson2892
3 жыл бұрын
@@Lifes_Apprentice see what you did to me. Lol
@awac4577
2 жыл бұрын
I'm just curious but is that underlayment or weather shield directly beneath the pipe flange (prior to the shingles)? How was that applied? Looks like one, continuous piece in the video. In any case, thank you for the video. Very helpful as I need to do the same thing on my roof around a chimney pipe (except the roof is on already).
@Lifes_Apprentice
2 жыл бұрын
we installed 2 continuous rows of ice and water at bottom of roof. that is why. it is not neccessary to have ice and water under or over
@joerobijr
Жыл бұрын
Great content man! Is there a reason for putting the ice and water shield on last?
@Lifes_Apprentice
Жыл бұрын
The reason we put it on last is just for water flow. If water was to get in it would run over water shield and onto metal or lower courses of shingles
@andrewtorres9081
Жыл бұрын
Instead of leaving that seam there I would of ran the other side of those steps up until before that shingle that had a seam and then used a smaller shingle on that top course and then a full shingle next so then there is no seam . 👍🏽
@NWIVeteranConstruction
3 жыл бұрын
Great video! Good enough for who it's for lol
@Lifes_Apprentice
3 жыл бұрын
You got that right!
@robbieklein6162
5 ай бұрын
Really helpful, man thanks!
@jamesscheidt4278
11 ай бұрын
Hey, great videos, but I wanted to caution that most codes will require a minimum of 1" clearance from combustibles. It looks like you shoved the flue into the roof sheathing.
@Brandon-no3vc
Жыл бұрын
No tar underneath the metal?
@dbarr8261
Жыл бұрын
What I do if the shingle edge falls so close to the edge of the flashing is cut a short one about 18" and then run a full one just so a seem doesn't line up so close to the edge of the flashing.
@Lifes_Apprentice
Жыл бұрын
add a shingle about 12 inches and then a full one but be careful with your nail spacing so you dont have nails in keyway. or just caulk the edge or seam of shingle
@ar2632
Жыл бұрын
Hey, your explanation is much better than other KZitemrs on why we're shingle in such a way, will you please share that nailer model?
@JDCBenitez
2 ай бұрын
Like it
@tysoncarpenter8628
4 ай бұрын
Yup always we use ice and water around a pipe awesome. his way is definitely the correct way lol
@Lifes_Apprentice
4 ай бұрын
I do not think it is completely necessary and is time consuming but it could stop a leak from a shitty job
@henryhofschneider471
Жыл бұрын
Righty goin Lefty
@richardmitton4115
3 ай бұрын
Yup, somebody else noticed that too!
@maciemoon8776
Жыл бұрын
Do you ever come to georgia?
@markbons7766
7 ай бұрын
10:08 he says "not to go through then metal" (vent flashing) . He nails into the flashing. No big deal if you put roofing cement on the nail heads(?)..
@DOPE_SESH
Жыл бұрын
Awesome vid, many ways to skin a cat type deal. Whatever works best for you. Nothing bad to say and this isn’t a rant of some sort, but why are you nailing left handed when your right handed? Lol maybe a leftie started it idk just curious.
@TractorMonkeywithJL
7 ай бұрын
Dang, you must have some tough knees if you can wear shorts on a roof.
Пікірлер: 44