Watch my related videos here: kzitem.info/door/PLxXQYs_IkpqNgQ5ZNhAqX9gA7AZWpZsGg
@scottwright4330
Жыл бұрын
Good video. I currently use chlorine but considering switching to Bromine. Which gives you clearer cleaner water?
@jray7265
Жыл бұрын
Hello Jeff. Great videos! Non related question, but should you occasionally leave the cover off to air out if you haven’t used it in a while? Or does it not make a difference at all to leave it covered for an extended period. Thank you! Keep up the great videos.
@drdrew3
Жыл бұрын
Pretty slick video but it left the most important questions unanswered: 1. What is that “good” target level” for chlorine you keep referring to immediately after shocking the spa? 2. What is that “safe level” for chlorine you keep referring to when it is okay to again enter the spa after it is shocked Including this critical information would have made this truly useful
@billiamc1969
Жыл бұрын
We use a chitosan clarifier and bromine shock every 2 weeks to keep our hot tub with crystal clear water
@jackdawson3276
Жыл бұрын
Great video but you dont want to shock when unnecessary! Every time you add chlorine, you are adding stabilizer (Cyanuric Acid) which in high amounts hinders the effectiveness of your sanitizer. You are also adding to your TDS (total dissolved solids) You really should be shocking with chlorine (Dichlor) when your total combine chlorine is higher than your free chlorine which means you have a high level of chloramines. Chloramines are chlorine molecules that are attached to contaminants. Chlorine lock occurs when all your chlorine is tied up and not ssnitizing. You ll get a 0 free chlorine reading even though you keep adding chlorine. You ll also notice a strong smell. To shock properly, you must add enough chlorine to get the level up to 10ppm so "breakpoint" is achieved. Breakpoint is when the chlorine and the contaminants seperate (break away) from the chlorine and dissipate into the air. The chlorine is then free to sanitize agsin. How many times you shock also depends on type of sanitation you use. I have a HotSpring salt system and also add a silver ion mineral stick. It's Feb now and I only shocked with dichlor once since msy last water change in August. Water is pristine. I did use nonchlorine (MPS) 2-3 times.and hit the boost button on my salt system a couple of times as well. In the summer, I add MPS more often, generally after pool parties or every 2-3 weeks. I also shock with dichlor a bit more often because the tub gets used more, but I generally do so only when needed. Salt systems generate pure chlorine with no adding harsh chemicals. That's why the water can last up to a year. You dont want to add too much cyanuric acid and total dissolids if you dont want to change your water every -3-4 months. Keeping phosphates low is critical when you have a salt system.
@perfectsoulmates2023
Жыл бұрын
HTO HQ thanks for staying on youtube, lots of people will need you in the near future, so stay motivated 😎
@bayside6207
Жыл бұрын
Your videos get me pumped up and excited to use my hot tub!
@DanKauk1979
Жыл бұрын
It's great to see you making videos again, Jeff. Always enjoy the great easy to understand information you share with all of us! I have a 2012 Limelight Pulse that was gifted to me, so it uses the old ACE salt water system. I had to replace the salt cell with a more generic cell (similar to the one someone would us as an add-on). It would be great to share some of your recs on taking care of a salt cell system (I'm sure most of it is the same). Thanks again and keep 'em coming!!
@LoveMunch-ev8uh
Жыл бұрын
Thank you for this well informed video
@Ebikelover
Жыл бұрын
Great great videos Jeff your like an encyclopedia of hut tub knowledge. My hot tub manual says not to use a floater, is that true or can i use one ?
@johnhanson2532
7 ай бұрын
Very helpful!
@ktf6789
3 ай бұрын
Thankyou
@shortypalmer2560
Жыл бұрын
I am confused. I thought you could not mix chlorine with bromine. You are using shock with chlorine and a bromine floater
@faamecanic1970
Жыл бұрын
You can mix Bromine sanitizer Tablets with granular chlorine shock. You don’t mix bromine granular sanitizer with granular chlorine shock.
@terjehimle3107
Жыл бұрын
Hi want to say i like your chanel and watched all videos :) I did like you and started with chlorine and are now using bromine wit chlorine shock nr.1 I always use measuring tool ml cups 5-10-20-50-100mg. makes it very easy to know what your spa needs i rise the ph and alkalinity and hardness Nr.2 i always remove the bromine before i shock with chlorine ( dont know if i have too)? Nr.3 I have river water and its a little brown. I shock the new water and its clears right up (need too clean filter) Thanks again for a great video :) 😀
@BlackoutWS6
Жыл бұрын
Great video thank you for this
@roberthiggins7323
Жыл бұрын
Great video. Any thoughts on using both types of shock. Our bull frog uses Frog @ ease and chlorine levels are super low by design. Their strip measures good but doesn't even register on a standard strip (1 -3 PPM). They say to use non-chlorine shock only. I want to use chlorine shock occasionally because of those low levels.
@stifflers69mom1
10 ай бұрын
Solid question…..bought a new jacuzzi and I’m in the same boat at you right now ….🤷🤷🤷 chlorine low …not even visible on normal strips ….at a loss ….I might ditch the frog thing ….they’re CRAZY money anyway
@GreenMountain565
3 ай бұрын
With the Frog System you don’t want to use granulated chlorine as this will raise your CYA levels and make your frog system unable to sanitize. You can add pool chlorine as this does not contain CYA
@ruthboyd7830
Жыл бұрын
My 1900 gallon swim spa has a UV/Ozonator system to purify the water. Since that does the same thing as shock (adding oxygen to the water), is shock even necessary? My water stays clear and bromine levels are stable (using only tabs in a dispenser). If I do add (non-chlorine) shock in any significant amount, the bromine levels shoot up really high and take quite a while to come back down to an acceptable level. The only answer I have ever found says that 'with an ozonator, you don't need to add shock as often'. No mention of how often or how much. Can you help?
@gabrielleluyando1381
Ай бұрын
I have a inflatable hot tub by 6 person tub, it's about 290 gallons. I been confused on how much shock to use, because the dishlor I got only speaks about 500 gallons on the label. Is it safe to use the same amount for 290 as the 500?
@KBradAdams
Жыл бұрын
Can you use the chlorine Enhanced Shock with an @ Ease sanitizing ball system?
@jv122798
Жыл бұрын
Hi there, i use a product called spa 56 from leisure time and it states that it can be used as a shock treatment and also a sanitizer. Have you heard of this product and does that make sense that it can be used for both? Thanks for your input.
@machinegundroner9411
Жыл бұрын
I just bought a hot tub with the EcoPure charge filters and the manufacturer says that Bromine is not recommended due to the minerals (copper and zinc) in the EcoPure filters. The manufacturer says these mineral filters are supposed to "reduce" the amount of sanitizer needed. How accurate is that statement?? I've also been using hot tub shock after every use, sometimes five times a week and the chlorine levels are showing zero on the test strips. Should I get a chlorine floater instead? And we've also had an outbreak of hot tub rash. So I'm guessing the mineral filters aren't really all they're cracked up to be? Long story short, I've only had the tub a month and I've already done a water change. Another question, what's the point in non-chlorine oxidizer if it doesn't kill anything?? What does it do, exactly? Thanks for the video.
@musashiasano4188
Жыл бұрын
If you forget to shock your hot tub a few weeks or it better to just drain and start over or can I do a high dose of shock?
@reedrobb
Жыл бұрын
What chemical makes your hair turn purple?
@tadlautner
6 ай бұрын
I thought it was ill advised to use chlorine shock with bromine?
@SmokinMesa
Жыл бұрын
Are you mixing choline and bromine? 😮
@jv122798
Жыл бұрын
I just got my tub with chemicals from jacuzzi. How do i know if my sanitizer is chlorine based?
@faamecanic1970
Жыл бұрын
Look at the bottle. If it’s chlorine it should be dichlorine (dichlor) sanitizer. Or it will say Bromine.
@swn2727
Жыл бұрын
i just left out my GFI that way don't have to shock my hot tub
@kelleeb7823
6 ай бұрын
why don't you just add the amount recommended on the label instead of just winging it with a chlorine based shock. do you just add this same amount for a 200 gallon hot tub? 800 gallon hot tub? all the same to you? exactly. follow the label people.
Пікірлер: 34