If you shop on Amazon, please use Amazon Smiles to support Social Media Ministries. smile.amazon.com/ch/87-1084575 Wheelbarrow ebay.us/zseHD2 Garden Hoe ebay.us/yAxlUS Concrete Mason Hoe ebay.us/79IalE Concrete Trowels ebay.us/vJflwe Concrete Float ebay.us/CiEQIw Concrete Broom ebay.us/BRPS5t Push Broom ebay.us/UGhRlf Extension Handle ebay.us/KFnorw Kneeling Boards ebay.us/HDQqlI Mortar Mix ebay.us/pijHo2 Portland Cement ebay.us/eQLh0m
@1stFlyingeagle
6 жыл бұрын
You should've told people to use concrete bonding agent so the new skim coat bonds to the old. Less chance of separation.
@HowToVideoChannel
6 жыл бұрын
Yes, that is a good point.
@pensive69
6 жыл бұрын
and i'd suggest skim coating over a damp surface for the same reason
@HowToVideoChannel
6 жыл бұрын
Yes, that would work well.
@BradleyGrohs
6 жыл бұрын
Or make sure your base concrete is soaking wet. If it doesn't absorb water it needs to be etched to open the pores so you will have fusion between the old and the new. If you pour mortar on top of dry concrete have a dry layer between because the old concrete will absorb the water. Useing an cureing additives or bonding agents would help with this. But the principal is the same. That dry layer will be weak because of lack of hydration and any cracking will result in delamination.
@yeaok8859
5 жыл бұрын
That was my first thought about the bonding agent most of the material that's out there will specifically let you know if they're compatible.. I'm guessing for the simple reason that they can only guarantee their product although wouldn't imagine it would hurt if you applied it and maybe smooth out or maybe roll with a roller brush that way the milk wouldn't take too long to dry before applying product. . Anyways good luck to whoever is attempting this for the first time ..lol ..I say always get a smaller bag if available that way you can use that as your trial run just to get the feel for the product because they're all different and oh so pricey..lol
@garybrady7245
Жыл бұрын
You can always pressure wash and etch the surface with a acid and h20 mix . Also I remember back in the day when I was getting taught the excellent field of tile, the old man would mix up what he called a slosh or a slurry which is Portland and glue or water mixed sorta like a batter and slop it all around. Helps with bonding, wow man the old school days of tons of dry pack mix with 3 guys 1 raking and 2 turning. 3 to 1 mix all day for 12 13 hours we moved over 31 tons of sand one day never forget we was sore lol
@HowToVideoChannel
Жыл бұрын
Yes, that would be another good solution!
@retireearly7223
Жыл бұрын
That’s the way to do it. At a minimum, the guy should have dampened the existing concrete to allow the new concrete to bond better. But you’re right, a Portland slurry painted on first would increase the bond between old and new. They also sell bonding agents by the gallon for this type of application.
@coachdee5162
4 жыл бұрын
Power wash 1st everyone .. Then roll on concrete bond then make it loose amd use a magic trowel with pole no hand trowel .. Is easier
@HowToVideoChannel
4 жыл бұрын
Awesome!
@derek4844
2 жыл бұрын
It won't work. Don't mislead people. It's not a moral way to help the community. This doesn't work. Resurfacer has special bonding agents and polymers to ensure it doesn't crack and even that stuff cracks at times so power washing isn't going to make it work sorry. Sorry tried it.
@living9377
2 жыл бұрын
Good tip thanks!
@Arriscraft
2 ай бұрын
that is the hard way cause i did it for years that way ,Now i have use a drill and paddle .Lot lest work . Good vid thanks rob ! Canada
@HowToVideoChannel
2 ай бұрын
Drill and paddle is much better!
@Konski82
Жыл бұрын
Thank you. I am doing this and it saved me about 12k in contractor fees.
@HowToVideoChannel
Жыл бұрын
Awesome!
@jimh2061
5 жыл бұрын
Basically this is a bricklayers mix for parging and chimney caps.
@HowToVideoChannel
5 жыл бұрын
It's a good mix.
@franslam7398
Жыл бұрын
Thank you for this. I've literally been looking everywhere for an answer as to whether I can use mortar mix to no avail. I came across you by accident weeks later.
@HowToVideoChannel
Жыл бұрын
That’s awesome! Hope you like and subscribe!
@vapeking8882
2 жыл бұрын
I did my concrete a week ago and there was lines from the float and rain drops so I used the grinder on it and its brown just under the top just a 1/8 down they was calling for a clear 2 weeks then it changed the morning we poured it been raining every day at night even the night we poured it put big drop holes everywhere on it i may try this to clean it up. thanks for sharing
@HowToVideoChannel
2 жыл бұрын
Yes, a skim coat over the top could be a good solution for you.
@markdaniel8740
6 жыл бұрын
When you started spreading, it was obvious that ir was not completely mixed. It is easier and you get a better mix if you and and mix a little at a time rather than all at once. Concrete does continue to harden over time, but it takes 28 days (4 weeks) to reach design strength. When using 3,000 psi concrete, the tests usually break at 2,700 or so after 14 days and 3,500 after 28. Our supplier doesn't want to replace their material for substandard strength, so they make sure the it breaks at higher than spec.
@zeke112964
6 жыл бұрын
He didn't pour concrete....he used a mortar mix
@Jungla694
5 жыл бұрын
Thanks for clarifying that 28 days = 4 weeks LOL
@HowToVideoChannel
Жыл бұрын
Thanks
@mk8530
3 жыл бұрын
I changed up to use Top'N Bond [$15 #40 lbs]. This stuff is a little expensive, but it has a ton of Bonding agent in it. You can even feather down to 1/16th inch. Dries pretty fast: 24 hours "walk on time", 48 hours "Drive on" time. I cant say enough good things about this product. It stands up to anything, and will last as long as any concrete. Note: if you have cracks, fill them first. Also - if you have deep cracks, they will surely wind up reflecting up. (That's not the products fault).
@HowToVideoChannel
3 жыл бұрын
Those are some great tips. Thank you!
@paulwhited117
6 жыл бұрын
Try a tile fortified thin set. That stuff sticks better than just mortar. I’ve had pretty good luck with this. But it’s not a cure all or 100% fix. Has the ability delaminate I’m some climates.
@HowToVideoChannel
6 жыл бұрын
Thanks for the tip!
@2Jeezuzisreal
5 жыл бұрын
Great. Im in Mn freezing winters. I have a old badly pited concrete driveway. I read that a skim primer is needed first. Any thoughts.
@robertaylor9218
5 жыл бұрын
Please don’t. Thinset mortar isn’t intended for exposure or as a wear layer. The cellulose that allows it to retain water (which is why it bonds and allows you to adjust your tiles) will mean that it will hold extra water and break down early. Fun fact, the first thinset mortar was made by adding sawdust to brick mortar. That should illustrate the problem with using it for concrete resurfacing.
@philindeblanc
4 жыл бұрын
Thanks for this video, AND replying to as many comments as possible. That is commendable. Since 3 years have passed, maybe a quick update on the finish?
@HowToVideoChannel
4 жыл бұрын
Thank you! I try to stay as active as possible on the channel! Unfortunately, I’ve moved away from this house so I don’t know what it looks like today.
@1SpeedBug
Жыл бұрын
So it appears you are basically creating your own concrete minus the rocks. I have a concern of cracking/flaking in a fews years with temperature cycles. I'm going to try this method to overcoat my sidewalk, but add some concrete reinforcement fiber into the mix to add strength and hopefully prevent cracking. Thanks for sharing the info.
@HowToVideoChannel
Жыл бұрын
The higher ratio of Portland cement will help with your concern of cracking. As will the added fiber mesh.
@deankay4434
17 күн бұрын
Should there be a cleaning procedure first? Mine had been coated with an epoxy and has some stains from vehicle oil. Muriatic acid would be my first choice. (Note: Handle with Care. This is an acid that will burn skin, destroy shoes and pants) Be careful, read all warnings and used outside requires no respirator if breeze is correct for your job. Clean with scrubbing action, repeat as needed. #2 What about a bonding agent? Even if the concrete is modified, by the measurements of Portland, the modified concrete will be weakened but a good dose of bonding agent will make the old surface sticky to allow better adhesion. I believe this is best practice unless the house is empty and on the market in 28 days for curing. Most folks and agents will be on the driveway to view the property. I truly believe your efforts are honest but on serious issues as a concrete driveway, best practices need to be reviewed. Thank you kindly for your video information.
@HowToVideoChannel
11 күн бұрын
Sounds like you should definitely clean your slab. In your case, the acid may open it up enough that you don’t need a bonding agent. However, using one may not be a bad idea.
@deankay4434
10 күн бұрын
@@HowToVideoChannel I look at a bonding agent is cheap insurance to get 10-20 more years of service. Belt & suspenders approach.
@manuelcalbert3404
Жыл бұрын
Mix all the dry mix before adding water
@HowToVideoChannel
Жыл бұрын
Thanks for you our input
@sharicross547
5 жыл бұрын
Lots of people mix a thin Portland mix and paint their driveways every year or so to give a nice look and temporary repair to extend the life of their driveway without investing what can amount to a fortune into more elaborate fixes. Ya, they do! So many of you don't consider what the cost to the home owner will be.
@HowToVideoChannel
5 жыл бұрын
That's a great idea to mix it into paint. Seems to me like it would be a great thing to do to a concrete block wall in your basement.
@mk8530
4 жыл бұрын
Thanks for the video, sharing your knowlege I learned a few things. I do a Portland, (Sika) Bonding agent and Sand mix, which saves me thousands of dollars. I don't mind having to do it over in a few years if I have to. The cost for polymers , or a complete resurface with concrete are astronomical. My Driveway is 2,500 square feet, that takes about (4) #94 lbs bags of Portland alone. @ $15 each or ($60.00). So you see, the cost is even less than concrete "stain" ($30 bucks a gallon + covers ~ 200 /ft 2), and you have to do 2 coats + and the stain will certainly wear off too. A Portland thin-set mix is not a permanent fix. Just know its going to need maintenance, of course, concrete does need maintenance.
@HowToVideoChannel
4 жыл бұрын
I’m glad you enjoyed the video! Thanks for sharing your insights!
@JEREMYFAIT
Ай бұрын
What ratios are you using approx of Portland, Bonding, Sand?
@combatvolta
4 жыл бұрын
This is the video i was looking for
@HowToVideoChannel
4 жыл бұрын
That’s great!
@whateveryousaypeople
5 жыл бұрын
Should have spray lightly water before skim coat.
@HowToVideoChannel
5 жыл бұрын
Yes, water helps it cure better.
@KingParisBuckingham
5 жыл бұрын
This mix may crack later.its too thin to just mix traditional Portland cement. ( for very thin skimcoating of concrete the best product to use is " concrete resurfacer " its specifically made for very thin layers like 1/4 inch or less. Basic Portland cement morta is for thicknesses 1 inch or more...under 1 inch it may crack later
@HowToVideoChannel
5 жыл бұрын
Thanks for the suggestion. So far, this is holding up pretty well. I'll look into concrete resurfacer.
@reaper-sz5tm
Жыл бұрын
@@HowToVideoChannel don’t listen to this guy. You never want to use mortar an inch thick. That’s not how it works. Portland is just fine.
@HowToVideoChannel
Жыл бұрын
Thanks!
@alcapony732
4 жыл бұрын
That's gonna have a nice hollow and crunchy sound to it when you walk around ....🤣🤣🤣 and maybe a few lines running through it after it cracks.....You should have primed the old slab.
@HowToVideoChannel
4 жыл бұрын
It’s held up nicely over the years. Doesn’t look perfect, but it serves the purpose.
@marcb2241
4 жыл бұрын
How do you know, if you moved away from the house and 'don't know what it looks like today' as per your previous comment?@@HowToVideoChannel
@JamesMike-nu8zh
7 ай бұрын
How about you stop treating this guy like he did something wrong?h can do whatever the hell he wants. Shut up and mind your own business.@@marcb2241
@SulaimanTheWordSmith
4 жыл бұрын
Mix mortar and concrete. Your advice saved my porch resurface project. I mixed Quickcrete S Mortar with Resurface Concrete. Thus far so good. Do you have a video on repairing basement cinder blocks that mover away from the lower block that connects to the concrete floor.
@HowToVideoChannel
4 жыл бұрын
That’s great to hear! Currently no video on the blocks.
@John-Rambo81
4 жыл бұрын
100% this will crack in cold climates the first winter. We have used this method on stoops and little patios and it cracks usually in the first winter def not good for drives.
@HowToVideoChannel
4 жыл бұрын
Winters are tough on concrete.
@walterdiaz2003
2 жыл бұрын
nice video. I need to level a bathroom floor with 3/4 to 1 inch think cement/concrete slab. You mentioned mortar mix and plain Portland cement to add strength. Which mortar mix would you recommend?. I found bought one bad of Sand mix, topping and bedding. It says on the bad that it's ideal for applications up to 2 inches thick but I'm not sure. I've never worked with cement/concrete before. Excellent video. Thanks.
@HowToVideoChannel
2 жыл бұрын
For leveling a bathroom floor you may want to call your local concrete distributor and ask for a floor leveling mix. They’ll ask you some questions about the project and then you can ask them what type of mix they have for the job. If that doesn’t get you anywhere then I’d suggest using a mix with very little aggregate. Perhaps only Portland cement or type S mortar mix. The other option would be to tile the bathroom floor and simply use extra tile mortar to level the floor.
@Ineedahandle75
2 жыл бұрын
Maybe this could be done with just lime and sand, without any Portland. If for some reason using cement was undesirable.
@HowToVideoChannel
2 жыл бұрын
It’s possible.
@stevenyhof9816
5 жыл бұрын
From all that I have researched you have found a combination of materials for less than pre made resurfacer cements. I want to also test with fibers for added strength and polymer.
@HowToVideoChannel
5 жыл бұрын
Adding mesh or fibers will definitely help with surface strength.
@philindeblanc
4 жыл бұрын
Yes, you can use a bonding agent and roll out a mesh on top. This helps the entire surface stay together and remain strong per square inch. I bet that there is a polymer you can add to the mix to make it more water proof.
@TimKollat
3 жыл бұрын
All you need is Portland cement, sand and acrylic polymer..1 part cement to 3 parts sand (good clean sand) and mix with polymers..NOT straight water. Bond coat the surface with the same polymer...its not to.ensure bonding but to seal the surface from drawing all the moisture from resurfacer too fast and it will crack.. Main thing is surface prep..grind the surface do not acid wash unless you're 100% positive you remove all residue.
@lizardfirefighter110
4 жыл бұрын
Should you wet down the old survive with water ( damp with no standing water) before adding the new coat?
@HowToVideoChannel
4 жыл бұрын
Yes
@philindeblanc
4 жыл бұрын
I get the sense of reading some comments from guys who sell their overlay packages for $8-16 sqft, and all those custom premixes, like the stuff Laggari puts out, which looks really bad in my opinion. The Ardex and Skraffino stuff are pricey compared to this. I guess using mortar is the key to get the ultra fine sand/gypsum, which I think CURED gypsum is waterproof, isn't it? Maybe that is heat treated only? BUt Mortar plus portland, and maybe a polymer powder mix would be great for more waterproofing. I hear that basic self leveling cement like Sika IS a poly mix, and why its a self leveler, and can be used as a floor finish. Couple guys demo this and it looks sweet.
@HowToVideoChannel
4 жыл бұрын
Yes, you are right on track!
@shawnlarry8943
5 жыл бұрын
Good work , Boss
@HowToVideoChannel
5 жыл бұрын
Yeah.
@derek4844
3 жыл бұрын
Sorry this doesn't work. They're going to waste your money and it's going to crack a few days after you finish. The problem is it's not polymer modified and it's not designed for high strength at low thickness. Unfortunately there's no quick fix to concrete resurfacing you're going to have to pay the money for the bags but make for certain that the bags you buy are fairly soft and not hard. If they're hard then they're no good and pick a decent brand and stay away from Lowe's products
@HowToVideoChannel
3 жыл бұрын
Thanks for the insight!
@wantsLDA
Жыл бұрын
Sounds like a user malfunction to be honest
@blueman5924
7 ай бұрын
My old Croatian boss always had me first brush on Weldbond bonding glue to the old surface prior to top coating. Whether it was repairing broken steps or slabs, it always gave a great bond for the topping crete. 🤙
@ci8158
5 жыл бұрын
that looks like the moon's surface now
@HowToVideoChannel
5 жыл бұрын
Nice
@fieldtrailer
4 жыл бұрын
Don't worry, he said it will dry and you can just brush it away. Lol
@jeffreyogden8802
3 жыл бұрын
Nice video. Very helpful.
@HowToVideoChannel
3 жыл бұрын
Glad you thought so!
@williamdubon5034
6 жыл бұрын
Nice video, but that won't last long before cracks again
@HowToVideoChannel
6 жыл бұрын
So far so good.
@miguelcastaneda7236
6 жыл бұрын
William Dubon yup 2...3 years...theres another type of concrete that has a polymer bled in it so it flexes...people use it for concrete counter tops it gives
@josevargas7407
5 жыл бұрын
Chip fix
@philindeblanc
4 жыл бұрын
@@miguelcastaneda7236 Cant you add a polymer powder to the mix?
@KingParisBuckingham
5 жыл бұрын
Concrete resurfacer you shoulda used its $44 a bag.it works miracles for very thin concrete resurfacing.try it
@HowToVideoChannel
5 жыл бұрын
Thank you.
@MrSoothingjazz
6 жыл бұрын
I'm pretty sure it would've been more efficient to just use a self leveler
@diversify210
6 жыл бұрын
Self leveler is a substrate that should not be used as a primary wear surface, so no it wouldnt have been better to use self lever
@mr.wizeguy8995
6 жыл бұрын
There are self levers on market that can be used as wear surface and are meant for it.
@jimlahey988
5 жыл бұрын
There is self leveling that is hard enough to be grounded so yes there is a strong enough topping
@raymondolinger6392
5 жыл бұрын
absolutely
@philindeblanc
4 жыл бұрын
@@diversify210 overruled. Self leveler has been used plenty to do just this. No dust comes up and has some waterproofing quality. I suspect that there is some polymers in self levelers, as there is some agent less dense than the cement that helps it level. ALL liquid solutions are self leveling, but you dont want it to run off if not contained..
@supercharged2414
2 жыл бұрын
All the dents and marks will broom off? That doesn't look like a finished surface. I guess I don't understand how to get a totally smooth surface like my driveway is now.
@HowToVideoChannel
2 жыл бұрын
You would use a troweled finish instead of a floated and broomed finish.
@Mackandal-
3 жыл бұрын
Thank you for this video!
@HowToVideoChannel
3 жыл бұрын
You’re welcome!
@joeaverager
4 жыл бұрын
So we bought a house that has a painted concrete porch. It was not poured right 25+ years ago and doesn't drain correctly. Could I resurface over the paint and how would I re-level it? It hasn't settled, it just wasn't sloped correctly in the first place. Float it with a piece of wood along the front wall to provide the correct slope?
@HowToVideoChannel
4 жыл бұрын
You could definitely pour over it with another layer. You’ll probably want to have a concrete mason come out and give you an estimate so you can pick his brain a little bit about your specific situation.
@joeaverager
4 жыл бұрын
@@HowToVideoChannel Thank you!
@jjballestrini
Жыл бұрын
Do you have an update video?
@HowToVideoChannel
Жыл бұрын
I don’t.
@lonewolffarms8313
2 ай бұрын
You should wet the surface before pour..it makes it stick
@HowToVideoChannel
2 ай бұрын
Definitely
@brianvinzant1893
3 жыл бұрын
What exactly is the Portland to morter ratio i should use and do i use straight mortar or mortar and sand mix
@HowToVideoChannel
3 жыл бұрын
Put a couple shovel fills of Portland for each wheel barrow full of mix.
@mattleggett5609
3 жыл бұрын
Would this method work if say you need to add like 2inches to part of a driveway like an 4×8 section
@HowToVideoChannel
3 жыл бұрын
It should.
@vegasbullys7538
3 жыл бұрын
This works on winter ❄️ temperatures outdoor patio. Wisconsin. -20 ?
@HowToVideoChannel
3 жыл бұрын
I would recommend pouring it in the winter. However, it should hold up to winter temperatures.
@towdoctor670
6 жыл бұрын
So basically 200lbs In the wheel barrel go ahead I'm listening....😂
@HowToVideoChannel
6 жыл бұрын
Wheelbarrows are strong.
@mmaboxingko4298
4 жыл бұрын
Danielle Gardner I’m sorry for your size
@jeffp7776
4 жыл бұрын
Dude when I was 16 I was wheeling redi-mix full wheelbarrows full for my Dads business those were more like 450-500 lbs
@towdoctor670
4 жыл бұрын
@@jeffp7776 I know you thought it might have been that Heavy
@jeffp7776
4 жыл бұрын
@@towdoctor670 a REAL contracts wheelbarrow has a capacity of 6 cubic feet. A cubic foot of concrete weighs 150 lbs +/- do the math.
@nebas.7074
4 жыл бұрын
Heavy duty work!! I
@HowToVideoChannel
4 жыл бұрын
All that Portland gives it heavy duty strength.
@nebas.7074
4 жыл бұрын
@@HowToVideoChannel 😀👍
@tedwhe
2 жыл бұрын
Sprinkle colorant on concrete skim
@HowToVideoChannel
2 жыл бұрын
Nice.
@RAIDERJAKE4
6 жыл бұрын
Can I add keep adding to a low spot on my patio? maybe to 2 inches, let it dry, then resurface the patio?
@HowToVideoChannel
6 жыл бұрын
Yes, you can do that. You'll be able to tell where you added the fill but it will work. Make sure to feather it out so that it's a little more blended.
@gale3684
2 жыл бұрын
will this cover cracks?
@HowToVideoChannel
2 жыл бұрын
Yes
@felixnungaray3253
5 жыл бұрын
Will this work for a driveway? Would I have to add more mortar mix
@HowToVideoChannel
5 жыл бұрын
Yes, I received an email from a guy who said he did this on his father's driveway 30 years ago and it is starting to crack now. He mentioned that he mixed 3 bags of regular mix and 1 bag of pure portland.
@scottwitkowski1298
5 жыл бұрын
Did you wet your patio first? I've had better wetting the suraface first.
@HowToVideoChannel
5 жыл бұрын
Yes, that way the concrete doesn't dry up too quickly.
@johnroddy8756
4 жыл бұрын
It has simular consistancy of cow scutter
@HowToVideoChannel
4 жыл бұрын
Looks like it
@psnewsauditor-az5244
3 жыл бұрын
Is wetting area optional?
@HowToVideoChannel
3 жыл бұрын
It would be best to spray down the existing pad before spreading any new concrete.
@davidmulhall2710
4 жыл бұрын
Would this work on an outdoor patio?
@HowToVideoChannel
4 жыл бұрын
It sure would.
@benitocaspo8493
5 жыл бұрын
mortar on the floor??
@HowToVideoChannel
5 жыл бұрын
It works.
@emerycorp
4 жыл бұрын
Benito Caspo 2
@jondoe7636
5 жыл бұрын
Good work looked nice
@HowToVideoChannel
5 жыл бұрын
Thanks!
@justinhafner12383
6 ай бұрын
Do you use concrete bonding agent? Thoughts
@HowToVideoChannel
6 ай бұрын
It wouldn’t hurt.
@joelheaton8738
5 жыл бұрын
Use a round nose shovel. Mich faster.
@HowToVideoChannel
5 жыл бұрын
Sounds good!
@chrisberardi3063
3 жыл бұрын
Why use mortar and not 100% portland cement ?
@HowToVideoChannel
3 жыл бұрын
You could use 100% Portland if you’d like. The mortar mix has a little more flexibility to it.
@mr.apache5455
6 жыл бұрын
a good idea , add it or not ?
@HowToVideoChannel
6 жыл бұрын
Adding more portland will make the mix stronger.
@Joe-jb1jf
6 жыл бұрын
What kind of concrete did you use?
@HowToVideoChannel
6 жыл бұрын
All Star - Green Bag
@joy8091
5 жыл бұрын
Do you think a woman could do this job without hurting herself or does it take male strength?
@HowToVideoChannel
5 жыл бұрын
I think a woman could do it without any issue. You'll want to have someone to help you though. It's a two-person job, whether men or women :)
@MMGJ10
5 жыл бұрын
A women could've done a better job than this clown with her eyes closed
@philindeblanc
4 жыл бұрын
@@MMGJ10 YOu know what...he fixed the patio spot, and it looks better than before. I think he could have gotten a slightly looser mix so he can trowel it better. His troweling is what he could improve on. But he is one of FEW people letting you know that you dont have to spend $50 a bag for overlay mix. His information is PRICELESS, and gives not only DIY folk, but many that get ripped off at $12sqft for something that can be done for $2-3 sqft. THATS the difference. SO WHAT it looks a bit rough. Sick of videos pushing product vs teaching material compounds.
@FM-rx5kk
4 жыл бұрын
Go at it girl, anything he can do you can do better!
@rainmaker3700
3 жыл бұрын
Are you good on your knees?? If so, the answer is Yes.
@girdlestonemutambara9592
6 жыл бұрын
Where are the stones?
@silviofontana3666
6 жыл бұрын
recovering after their last concert
@johnjacobsen1915
5 жыл бұрын
no aggregate. it is NOT concrete. it is skimcoat, applied for aesthetics, not structural use
@maurocanizalez1537
5 жыл бұрын
I believe the Stones are on tour right now!😆
@Seaventeares
5 жыл бұрын
girdlestone mutambara Well, i KNOW Mick Jagger is recovering from heart surgery.
@Rick-the-Swift
2 жыл бұрын
I believe the Stones are still hiding in the Beatles' shadows😆
@sabooramir5061
2 жыл бұрын
👍👍👍👍👍👍 nice
@HowToVideoChannel
2 жыл бұрын
Thanks
@stevenlaubach7222
3 жыл бұрын
I would of used a magnesium float on it not a hand trowel.
@HowToVideoChannel
3 жыл бұрын
Yes, magnesium floats are much better.
@noiseviolation2634
5 жыл бұрын
Can that also be used to fill in parts of a slab where there's some low spots where puddles form? Pour it over those areas and then pull the 2x4 over it to make it level?
@HowToVideoChannel
5 жыл бұрын
Yes, however, the new concrete will be a different color. Make sure you clean and score the existing concrete so that the new stuff can adhere. Then trowel it out sort of like Sheetrock mud when fixing a wall.
@its_danielle_fuckers3177
4 жыл бұрын
Bradley Jon they also make a self leveling mix.
@NerdDrops
4 жыл бұрын
I need to do the same exact thing, looking for an easy fix. Patch up some cracks and a low spot that builds puddles. Any advice would be great
@akitaman1988
5 жыл бұрын
Nice mess.
@HowToVideoChannel
5 жыл бұрын
Yeah.
@darrinvandemark4781
5 жыл бұрын
Wheelbarrow, not wheel barrel. Nice job though!
@HowToVideoChannel
5 жыл бұрын
Thanks.
@dragonfitter
4 жыл бұрын
I think the Americans call wheel barrows wheel barrels
@believenman
5 жыл бұрын
Could you drive a car over this without it breaking apart? My 20x20 garage needs a quarter inch skim coat.
@HowToVideoChannel
5 жыл бұрын
Yes, I received an email from a guy who said he did this on his father's driveway 30 years ago and it is starting to crack now. He mentioned that he mixed 3 bags of regular mix and 1 bag of pure portland.
@believenman
5 жыл бұрын
@@HowToVideoChannelNot bad for 30 years! That's way more than you would expect before cracking.
@broken1965
4 жыл бұрын
Get some rapid set and be done with it
@HowToVideoChannel
4 жыл бұрын
Yes, perhaps for a future video!
@rayjohnson4074
6 жыл бұрын
Looks like a peanut butter spread to me
@HowToVideoChannel
4 жыл бұрын
That's alright.
@baitmain55
5 жыл бұрын
whats going on with all of the dents and knees marks it looks horrible
@HowToVideoChannel
5 жыл бұрын
It's not perfect. Suits the purpose though.
@duskinlouie1370
6 жыл бұрын
Not going to hold
@HowToVideoChannel
6 жыл бұрын
Maybe
@littlefarmerette123
2 жыл бұрын
WHEELBARROW, not wheel barrel.
@HowToVideoChannel
2 жыл бұрын
Yes
@Quebicrecords
5 жыл бұрын
Rough as a platt bridge
@HowToVideoChannel
5 жыл бұрын
It's a rough floor.
@Quebicrecords
5 жыл бұрын
It is not concrete...it’s a screed, concrete is a mixture of sand, cement and stone, this is called “aggregate “
@joshuamcnew1200
5 жыл бұрын
I.... hope you got paid for this job lol
@HowToVideoChannel
5 жыл бұрын
Nope.
@therealoxitsworththeart9637
6 жыл бұрын
Nice vid but it's going to crack bro
@HowToVideoChannel
6 жыл бұрын
Nah, that Portland will hold it together. Be perfect for a side patio or a dog kennel.
@chrisfry436
5 жыл бұрын
@@HowToVideoChannel right! if your not parking a truck on it, etc it should be fine!
@CSLFiero
3 жыл бұрын
@@chrisfry436 if you are parking a truck on it, mix it a bit dryer and replace most of your water with an acrylic fortifier. that should bring it up to spec.
@elwinnordman2578
5 жыл бұрын
looks like a wet mess
@HowToVideoChannel
5 жыл бұрын
Only until it dries
@MMGJ10
5 жыл бұрын
@@HowToVideoChannel Then it's a dry mess
@joesheetmetal4658
5 жыл бұрын
This will not last very long
@HowToVideoChannel
5 жыл бұрын
Long enough.
@williammadden3851
5 жыл бұрын
That is as rough as a bears hole
@HowToVideoChannel
5 жыл бұрын
I don't have any experience with a bear's hole.
@Rick-the-Swift
2 жыл бұрын
Do you mean a sheep's hole because of the wool?
@Rick-the-Swift
2 жыл бұрын
@@HowToVideoChannel The roughest part of a bear's hole must be in getting the bear's compliance😆
@tlb3855
4 жыл бұрын
Won’t last...
@HowToVideoChannel
4 жыл бұрын
Still there today. May not last 40 years, but serves its purpose.
@watchingyou4058
5 жыл бұрын
No thanks...
@HowToVideoChannel
4 жыл бұрын
No problem.
@lissaklopf9337
3 жыл бұрын
pretty rough looking,
@HowToVideoChannel
3 жыл бұрын
Yeah, but it got the job done.
@j-kane5922
5 жыл бұрын
not what I would expect, but if it's good enough for you, then hey...
Пікірлер: 243