UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust kzitem.infoUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
@ALinsdau
11 ай бұрын
Great!
@jasonchewy
3 жыл бұрын
You should really end your video showing you actually fixing and seeing after the fix how it sustains the pressure.
@ALinsdau
3 жыл бұрын
Thanks for the comments.
@JeremyCarnahan
24 күн бұрын
Agreed
@themaximusone
3 жыл бұрын
I hate to say it but they make garbage power washers
@ALinsdau
2 жыл бұрын
Thanks for watching.
@carolharbin1574
Жыл бұрын
I am so happy that you took the time to explain this. I've never used a pressure washer, and I finally purchased one. I had serious issues with the air built up in the hose. I am a single woman over 50 and had no idea what I was/am doing. Now that I finally located your video, (not easy to find online). Maybe because other users know what they're doing. 😂 Thanks so much.
@ALinsdau
11 ай бұрын
Thanks for watching!
@revisionistcrap211
5 ай бұрын
Ditto Carol. 50 something single woman playing with a pressure washer. After the water hose connection on the tap came loose I couldn't get the thing to work again properly, thought I killed it 🤣. Thank you Aaron!
@johnfoley2243
3 жыл бұрын
Great Video and thanks for the tip. ALSO, thank you for getting straight to the point and NOT spending the first few minutes babbling (like over videos by other people).
@ALinsdau
3 жыл бұрын
Thanks.
@1clkvideos
3 жыл бұрын
Great explanation. Here’s what I’ve done to minimize the time spent running air through my machine: I installed a quarter-turn shutoff valve at the end of my water hose, so I turn on my water and run all air out of water hose, then I shut off water with quarter-turn valve at hose end. Then I just attach water hose to pressure washer, open quarter turn valve, then I bleed air through pressure washer / hose before attaching wand assembly - this procedure moves the air out very quickly.
@ALinsdau
3 жыл бұрын
Great tip!
@wicklowabby7977
3 жыл бұрын
How TF does this comment have only one like? And it's from me.. what the Creator didn't deem it like worthy?
@ccreed50
2 жыл бұрын
I'm likin' it. Infact, Imma do it.
@frankplacido368
4 ай бұрын
I can’t believe that there are people who haven’t done this!
@lynnjones6386
3 жыл бұрын
Wow! I was afraid my pressure washer was broken, but this explains it quickly and how easy it is to fix the problem. Thank you sooo much
@Eternal_11_Sasha
3 жыл бұрын
Same!!!!
@ALinsdau
2 жыл бұрын
Thanks for watching & subscribing!
@Grey_Ghost_GX
2 жыл бұрын
Same!
@rajmohann
Жыл бұрын
Same here!!
@bricewilliamson1124
Ай бұрын
The GODS just saved my Husqvarna 2000 electric pressure washer and saved me about $500 . I was about yo trash it and buy a gas unit. Thank you my guy. I have been toying with this thing for about an hour in the yard. I tried your suggestion and bam! Water works and the pump is humming like a bird
@ALinsdau
Ай бұрын
Great!
@brooke9903
3 ай бұрын
Oh,.. I've been running the water forever! I feel like what you discussed is my problem. I didn't read the instructions correctly at first and ran the water for a minute after i connected it (i thought to make sure the water really ran through) instead of before, and i'm sure totally got a lot of air in the machine. I bet I have run the water (without the power washer motor running) for atleast 30min total now if not more and still the same pressure when I turn on the machine. Am I missing something? Any other tips before I return it?
@ALinsdau
3 ай бұрын
30 minutes sounds too long unless you have a leak in your supply hose.
@mikem6213
2 жыл бұрын
Nice vid. Thanks. I will mention that I've found that my older gas powered pressure washer has trouble starting with full water pressure, so I had to do it a little differently. I run the hose to release the air , then with water running and air relieved, I loosely attach the hose to the unit, start the motor and then tighten the hose fully. This works great for me. Again, thanks!
@ALinsdau
2 жыл бұрын
Great tip!
@slowjamcdub
2 жыл бұрын
Good idea!!!
@inandoutmobileautocleaning1530
7 ай бұрын
Hey man thanks for the video I’m going to try this tomorrow because I’m having a problem with my robi 1800 and it’s new. Would it matter that I have a 8 foot hose going from the pressure washer to a 50 ft hose reel.
@ALinsdau
7 ай бұрын
My longer garden hoses seem to hold a lot of air so I have to clear it first. Good luck!
@roylindsey7030
Ай бұрын
Man, you helped me feel better about my pressure washer. I was having the same problem. I always let the water just flow through the line before I use it but this time I guess I did not do it enough and it would not pressurize. I am going to try this again, but this time thoroughly water the lawn first. Thanks
@ALinsdau
Ай бұрын
Good luck!
@e_g7736
3 жыл бұрын
Thank you! It helped me! I was waiting for 30 seconds, how it was specified in documentation. But the device stopped working after several seconds. I tried to delete the nozzle and let the water go for 5 minutes. After that the device started working properly.
@ALinsdau
2 жыл бұрын
Thanks for watching.
@marymoney9730
Жыл бұрын
So ive had mine for about 4 years and only used it once. Everytime I would be using it, it would start to smoke so badly that I had to turn it off. What could be the problem. I bought it brand new from Home Depot and it has oil and gas in it. Please help!!
@ALinsdau
4 ай бұрын
Oh, that's bad...definitely get it repaired.
@irishtwin6146
3 жыл бұрын
Wow, I’ve looked everywhere for a solution and thank goodness I ran across your video because I was ready to put my 1yr old power washer to the curb! Thank you! Thank you!
@ALinsdau
3 жыл бұрын
Glad it helped!
@mosesjonathan1240
3 жыл бұрын
Pro trick : you can watch series at flixzone. Been using it for watching lots of of movies recently.
@dangelojustus3337
3 жыл бұрын
@Moses Jonathan yup, have been using Flixzone} for since november myself :D
@marceloterrance3532
3 жыл бұрын
@Moses Jonathan Yup, have been watching on flixzone} for since november myself :)
@davidmartinez5459
Ай бұрын
Whoa, was about t put my pressure washer out to pasture, going to work on doing this first! Hope it works. Thanks!
@ALinsdau
Ай бұрын
Good luck!
@jamesbacon300
11 ай бұрын
What if your handle/gun doesnt let preassure build? Like it just stays on forever and you just cant get it to stop without kinking a hose somewhere?
@ALinsdau
10 ай бұрын
Sounds like it needs to be serviced?
@DonSchademan-sk4lp
4 ай бұрын
My washer runs great, except when I let up on the trigger, the minute I let up the engine quits! When I pull trigger and keep it pulled it will start and run fine, but let up on trigger it quits!
@ALinsdau
3 ай бұрын
It's a bit strange but yes, that's how it's supposed to work.
@fabricandflowers83
Жыл бұрын
Ok I just bought the 2700 psi ryobi. I sat with it off running water through it for 5min. Turned it on to see if it would work but nope. With it on if i let off the trigger the motor turns on then sounds like it releases air. I guess ill run water through it for 10min. Wish me luck
@ALinsdau
10 ай бұрын
Hope it worked out.
@aquariuswithfire
2 жыл бұрын
Can't be stressed enough that all air must be purged before putting on a pressure tip. I like to put the feed hose on loosely, turn on the water at the house and back the hose nut off as far as I can with out it coming off to purge most of the air from the feed hose. Depending on how long your feed hose is it can save 5 -10 minutes evacuating the air. Take the time it takes to do it right and the unit will last a long time. Great video.
@ALinsdau
2 жыл бұрын
Great pointers, thanks.
@DrLaFuria
5 ай бұрын
My situation, pressure washer running fine, then I stop to change tips, and when I restart the pressure washer unit stops. I have to reset the breaker on the cord. Don't know why this happens. New unit
@ALinsdau
5 ай бұрын
Good luck with the new one!
@michaelmcgill-uu5ox
6 ай бұрын
My nilfisk does that al try putting it on fr 5m8ns without nozzle run water thro then try nozzle great vid thanks
@ALinsdau
6 ай бұрын
Cool, thanks
@steveturner864
Жыл бұрын
THANKS MATE YOU HAVE JUST SAVED ME £340, I WOS ON THE VERG OF GETTING A NEW ONE, TOP BOY! Ye ha!
@ALinsdau
Жыл бұрын
No problem 👍
@AbelardoCardenas1972
9 ай бұрын
Mine just has no pressure the pump is on and stays on the handheld throws wayer as if I was holding tje trigger on what could be the problem
@ALinsdau
6 ай бұрын
Might want to contact the manufacturer for safety.
@ajdavies4677
2 ай бұрын
Yes! This was apparently my problem. Thank you!
@ALinsdau
2 ай бұрын
Great to hear!
@davidb100
5 ай бұрын
30 seconds of watter flow with the washer off will solve it... its actually written on the machine instructions
@ALinsdau
5 ай бұрын
Thanks!
@stuartjohnson1238
5 ай бұрын
Maybe getting air out of hose before attaching to pressure washer also. Thank you for the video!
@ALinsdau
4 ай бұрын
Great point!
@jf8250
Жыл бұрын
2 minutes was all it took before full pressure. Thank you so much!
@ALinsdau
Жыл бұрын
Sweet.
@toddage83
Жыл бұрын
Kinda confused , is the pump running when he’s watering his lawn with the tip off? Doesn’t sound like it
@ALinsdau
Жыл бұрын
I keep the pump off until the air is cleared.
@richardarredondo9311
Жыл бұрын
Wish this would’ve helped . My gas ryobi pressure washer runs the same when on or off
@ALinsdau
Жыл бұрын
Sorry to hear that.
@22TheJuggernaut
2 жыл бұрын
MY issue was my Hosebib by my garage doesn't have enough PSI.
@ALinsdau
3 ай бұрын
Darn!
@johnstelluto9101
3 ай бұрын
Have you tried running the water through your hose first to get the air out then connect it to the power washer? Would that be easier?
@ALinsdau
3 ай бұрын
Yes, I've run the hose but still end up with some air for a while in the compressor.
@paulsharp6559
Жыл бұрын
Sorry but that do not fix the problem. Thanks anyway.
@ALinsdau
11 ай бұрын
I've seen the carts running around the terminal with people.
@lamplighter2085
2 ай бұрын
bought a ryobi PW pressure today pressure is surging was going to return tomorrow, I'll purge the air and try again, thanks for the tip!
@ALinsdau
Ай бұрын
Good luck!
@lamplighter2085
Ай бұрын
@@ALinsdau It worked I turned on the machine and ran water without the tip on the wand it took about a minute it burped twice, now works perfect thanks much
@samuelbarbary8603
Жыл бұрын
My sun joe trips the breaker even after installing a new gfci plug. The first time turning it on it had low pressure, then it trip. Changed the plug and it immediately tripped. Any ideas? Thank you
@ALinsdau
10 ай бұрын
Is it on a 15amp circuit? Do you have other items on that circuit? Best to consult a licensed electrician - that doesn't sound good/safe.
@samuelbarbary8603
10 ай бұрын
@@ALinsdau yes, it's on a 15 Amp circuit. Nothing else on that circuit. Sun Joe help is worthless. Thanks for your comment.
@flowingracefully893
6 ай бұрын
THANK YOU, THANK YOU, GOD BLESS YOU MY BRO!😎
@ALinsdau
6 ай бұрын
Thanks for watching!
@dmdtorres
Жыл бұрын
do you have any idea why the pressure washer shoots automatically
@ALinsdau
Жыл бұрын
Not sure...
@RoamingShark
3 жыл бұрын
Wow, Alinsdau! You just saved me buying a new pump for pressure washer I use on top of my Dock. I attached a Y connector to the Pressure Washer let the air bleed out then turned it off and opened up the one connected to washer. Instant pressure! Appreciate you man!
@ALinsdau
2 жыл бұрын
Thanks for watching & subscribing!
@terryh985
2 жыл бұрын
@RoamingShark Came across this video last year and it saved me from buying a new pressure washer because I thought the pump was crap. My problem is having patience to stand there for five minutes every time I use it (100 ft hose). Your Y connector suggest is "Gold". Just ordered one from Amazon.
@larryfriedberg9851
2 жыл бұрын
Question..Forgive my understanding here. How are you purging the air from one side? It seems like it's open(with nothing connected to it) than turned off. Meanwhile the water source is connected to the other side and is just waiting to be turned on. Another question..does limiting the pass thru from a 3/4 inch hose thru the smaller valve ball reduce the amount of water (GPM)going to the washer itself? Thanks.
@bluentan1384
2 ай бұрын
Thank you Lord for allowing me to find your video!!! You’re a blessing! We got so discouraged when it sounded like the pump wasn’t working after we even thought we primed it sufficiently! You sir are appreciated!!!!
@ALinsdau
2 ай бұрын
Glad it was helpful!
@johncarter8735
10 ай бұрын
Thank you 🙏 problem resolved!
@ALinsdau
10 ай бұрын
Great!
@haleyclark1164
6 ай бұрын
What if I can’t hear anything or nothing is coming out of that part ??
@ALinsdau
6 ай бұрын
Water line might be clogged.
@SQD-1
Жыл бұрын
Helped so much thank you
@ALinsdau
Жыл бұрын
Glad to hear!
@davetaylor528
Жыл бұрын
I was looking for a video on my power washer to help me tare it down and try to fix it ,but luckily for me and my machine I found this video instead. I won't hesitate to go to wrenching on it but I'm going to try your idea first. I didn't know it could take that long to purge. Thank you you may have saved me and my machine.
@ALinsdau
Жыл бұрын
Great to hear!
@richardefriend
2 жыл бұрын
Here's a trick I've found that eliminates most of the air problem: add a hose shut-off valve to the end of the hose that goes into the washer, and turn it to shut before removing the hose (and I also have a quick release connection that goes between the valve and the washer). That way, the water doesn't squirt all over the place when the hose is removed, and there's hardly any air in the hose when you go to reconnect the hose.
@ALinsdau
3 ай бұрын
Great pointer!
@marialago8677
2 ай бұрын
Thanks a lot. You save me some money 😊
@ALinsdau
2 ай бұрын
Great!
@loudiamonds23ify
3 ай бұрын
Super helpful thanks 😊
@ALinsdau
3 ай бұрын
So glad!
@BabyFresh2.0
Жыл бұрын
But the water shoots out by the part used for cranking
@ALinsdau
10 ай бұрын
Not sure on that one, would have to see it.
@BabyFresh2.0
10 ай бұрын
@@ALinsdau I feel ya on that one,I might need to replace that whole part.
@bluerineimb1148
2 ай бұрын
Well if you have a quality unit it should be self primming
@ALinsdau
2 ай бұрын
That'd be nice!
@bluerineimb1148
2 ай бұрын
@@ALinsdauwhat pressure washer do you have
@JohnS-m5t
Жыл бұрын
Thank you it worked!
@ALinsdau
Жыл бұрын
Great!
@dadtechmech
3 ай бұрын
nice sharing
@ALinsdau
3 ай бұрын
Thank you! Cheers!
@shaniaa9287
10 ай бұрын
Thank you so much. I had issue.
@ALinsdau
10 ай бұрын
No worries!
@MisterHen
2 ай бұрын
Thank you!
@ALinsdau
2 ай бұрын
Sure thing!
@buffi944
Жыл бұрын
When did it rain in that place one time
@ALinsdau
Жыл бұрын
Not too much rain here.
@williamumstetter8518
5 ай бұрын
Thanks so much for this. We could not power wash last year due to illness so it has been 2 years and everything you showed was what was going on. I had to take plyers to get the tip off but once I did, the machine came alive. It was just as you said. Thank you.
@ALinsdau
5 ай бұрын
Excellent!
@shaneksmith1957
Жыл бұрын
I'll try it. That is exactly what happened to mine. Before I use a sledge hammer I'll try your trick.. First day worked well for a couple of hours. I'll come back and report. Thank You.
@ALinsdau
11 ай бұрын
Best of luck!
@Promisedland_garage
Жыл бұрын
Thanks you so much sir, just fixed my Hart electric pressure washer, did this and 1minute started working as always,never happened to me
@ALinsdau
Жыл бұрын
Great job!
@jhard94
7 ай бұрын
This is what mine does
@ALinsdau
7 ай бұрын
It's a problem for sure.
@jsnfrantz
3 ай бұрын
Amazing advice!
@ALinsdau
3 ай бұрын
Thanks!
@jayyfreshh7538
2 жыл бұрын
I was really pissed off, because I just recently got one and it’s keeps pulsating and I thought the thing was broken….
@JerradAdams
4 ай бұрын
no air in the line but still no pressure. new gun and new hose.
@ALinsdau
4 ай бұрын
Maybe exchange?
@JerradAdams
4 ай бұрын
@@ALinsdau it was a stupid problem and just needed now tips
@handyjoe6937
Жыл бұрын
Thank you for the video, very helpful. I will have a try. I used my pressure washer today, then I took a hour break.whne I back to use it ,it just like what you showed in your video. The pressure goes down and up and down again. I actually bought a brand new one just started using the first day!! So I was thinking that it went fault. I will try your way to see if this is the reason.
@ALinsdau
Жыл бұрын
Good luck!
@llllKAGEllll
5 ай бұрын
Thank you sir
@ALinsdau
4 ай бұрын
Welcome
@toddcastle3926
4 ай бұрын
Very interesting video. I just replaced my water manifold and had this problem…. I was sooo mad!
@ALinsdau
4 ай бұрын
Hope it worked out.
@josephcallahan5496
2 ай бұрын
Good job bro! You're the man. I haven't even done it yet but I know it that's what it is. You know I kind of thought maybe it needed to be primed because it didn't start right when I hook the hose up. I was going to try that anyway but now I know for sure thank you
@ALinsdau
2 ай бұрын
Thanks!
@marybischoff-moore8615
4 ай бұрын
Thank you!❤
@ALinsdau
4 ай бұрын
Sure thing
@ahmadshareef1342
3 ай бұрын
Excellent 😊
@ALinsdau
3 ай бұрын
Thanks 😊
@LARRYHOOVER467
Жыл бұрын
This is not a video about solving pressure washer issues it's a video how to prevent issues. Video was completely useless from my situation I was hoping it would fix
@falconwings3864
Ай бұрын
Thanks a ton but Did you say at you are “Polar Explorer” at the end? Let’s talk abt that 😍
@jacobsharp4985
3 жыл бұрын
I was just about to take my ryobi pressure washer back for warranty work for this same issue but your video helped me out. Thank you
@ALinsdau
3 жыл бұрын
I hope it helped. Thanks for watching.
@ferrellspruell7928
10 ай бұрын
Thank you.. I've tried everything on this portable Teande Pressure Washer.
@ALinsdau
10 ай бұрын
Glad I could help
@azbatz
Жыл бұрын
Hi Aaron, I am a little confused. Do you "water the lawn" with pump on or off. In the video you showed both ways. The problem I am having is similar but a little different. The motor will come on and the 1st few seconds after pulling the trigger will be high pressure and then only a single tiny stream. When I release the trigger the pump seems to build up pressure and the same thing happens.
@ALinsdau
Жыл бұрын
Water the lawn with the pump off until all the air clears, then turn it on.
@DuckMcDuckinson
11 ай бұрын
Hey Aaron. Would a shorter garden hose be the best option for less air? I just got a 3 foot one so it’ll be the best for my pressure washer instead of the 20+ foot one I was using beforehand
@ALinsdau
11 ай бұрын
It'll take less time to clear with a shorter hose for sure.
@willspeed112203
Жыл бұрын
Thanks!
@ALinsdau
Жыл бұрын
No problem!
@ZenLillyPhoto
8 ай бұрын
Thank you, thank you! I was just about to give up. Your advice worked perfectly and I was able to finish the job.
@ALinsdau
8 ай бұрын
Excellent!
@sirpatmcc
11 ай бұрын
Thank you for demonstrating that,very helpful.
@ALinsdau
11 ай бұрын
You are welcome!
@TheSaint226
2 ай бұрын
Maybe I am not understanding, but couldn't you turn the hose on (before connecting to the pressure washer) and wait until waters is coming out, then(turn off water just long enough to connect the hose to the pressure washer, then turn water back on? Wouldn't that clear most of the air, and you wouldn't have to clear it for 5 mins? Thanks!
@ALinsdau
2 ай бұрын
As long as you can prevent the hose from draining.
@25inspector
2 жыл бұрын
What about if the nozzle doesn't shut off? It's leaking all over where it connects.
@ALinsdau
3 ай бұрын
Might need an intermediate shutoff valve.
@williamgallagher25
2 жыл бұрын
Thank you! This is exactly what my washer was doing!
@Fast333i
3 ай бұрын
Life saver. Was about to take my newly bought toy back to the warranty until I watched this video. Super helpful 👍 Edit: I was so eager to find out if this solution actually works that I got up at night to test it myself
@ALinsdau
3 ай бұрын
Great to hear!
@kellineal5369
4 ай бұрын
Thank you for this information! I thought my pressure washer was broken but after following your instructions... it's working again!!
@ALinsdau
4 ай бұрын
Thanks!
@KirstenScott-m3p
Жыл бұрын
Thanks for the info! Worked like a charm after following your advice.
@ALinsdau
Жыл бұрын
Excellent!
@itsninjamo752
Жыл бұрын
Dude! Exactly my power washer exactly my issue thank you so much !
@ALinsdau
11 ай бұрын
Thanks for watching.
@familymoseley1393
Жыл бұрын
That was great! Nice job! Makes me want to pick you brain on some other things I need to learn about just so I can have you teach me in a private lesson, lol, one on one!
@ALinsdau
3 ай бұрын
Thanks for watching!
@Liverpool67890
3 жыл бұрын
It’s a beautiful area you live my friend..
@ALinsdau
3 жыл бұрын
Yes, thank you
@Liverpool67890
3 жыл бұрын
@@ALinsdau Which state if u don’t mind my asking
@Gque_
Жыл бұрын
Ok I’m about try this today. I thought I was headed to the store to buy another one. You may have just saved me a few dollars. Wish me luck.
@ALinsdau
10 ай бұрын
Best of luck!
@DHSFPD2211
Жыл бұрын
This is exactly what I have been dealing with - Thank you for posting this, very helpful!
@DHSFPD2211
Жыл бұрын
Followed you process and my pressure washer worked perfectly!
@ALinsdau
11 ай бұрын
Thanks for watching.
@ALinsdau
11 ай бұрын
Excellent!
@johnnylowellabercrombie5258
19 күн бұрын
Yeah but what about real pressure problems
@Recowreckin
2 жыл бұрын
Wow teacher and explorer he does everything thing
@Daanial1234
4 ай бұрын
I've had this issue, wanted to return it, watched your video and now it's working like new again... Thank you so much! 😊
@ALinsdau
4 ай бұрын
Great to hear!
@waterhead1027
Жыл бұрын
The machine is brand new, and you helped me learn how to troubleshoot it. It primed, but still wouldn't work when I attached the wand. The reason was that the person I had loaned it to returned it with the tip clogged and the coupler seized up with gravel. At least it didn't cost me any $$$. Thanks!
@ALinsdau
4 ай бұрын
Sure thing.
@joshoeproductions8681
Жыл бұрын
Thanks for this good sir!
@shannonbailey7580
3 ай бұрын
Lol he looks like David Strathairn
@meanbean98
3 жыл бұрын
also the tips make you think its broken when the tip is clogged ...
@ALinsdau
3 жыл бұрын
Good point.
@singhaviation
Жыл бұрын
Thanks for the solution. I always thought it was pump.
@ALinsdau
11 ай бұрын
Thanks for watching!
@gregwysocki8696
2 жыл бұрын
My ,P,,,w is electric and motor not respond after I reset
@amadornj
Жыл бұрын
Thank you you saved me much aggravation! Best to you!
@ALinsdau
4 ай бұрын
Best of luck.
@tokin420nchokin
2 жыл бұрын
Use one of those plastic shut offs and pre charge the hose. That you can screw it on and just twist the valve open.
@ALinsdau
2 жыл бұрын
Great idea.
@Beth4653852
Жыл бұрын
Thank you so much!!! I didn't even think about that!
@ALinsdau
Жыл бұрын
No worries!
@nashole23
3 жыл бұрын
use a quick connect fitting the same as your pressure washer, keep a hand spray nozzle handy prime the hose with water, then the quick connect won't let air back in the hose. it will be primed all the time.. (until you let some air in somehow)
@ALinsdau
3 жыл бұрын
Great tip!
@WalkOverHotCoal
2 жыл бұрын
Air lock is a problem with hoses. Why not just do these ? (1). reel out the hose, (2). turn on the water, but don't connect it to the washer, and (3). connect it to the washer once the water flow is consistent enough to plug it in.
Пікірлер: 527