Read Description!
Deutsch:
Anmerkung!: Für das Video wurden die Wischer demontiert! Das könnte auch ohne Demontage funktionieren!
In diesem kurzen Tutorial zeige ich euch, wie ihr beim Hyundai der Baureihe PD/ PDE den Soundgenerator ausbauen könnt.
Für das Video wurden teile des Windshield-Noise-Fix-Videos verwendet, da ich bei diesem Wetter nicht nochmal alles aufnehmen wollte. Für die die es kennen, einfach vorspulen.
Wieso das Ganze: Beim N der ersten Baujahre gab es ab und an immer mal wieder Probleme mit dem Teil. Dazu gehören Vibrationen, Rattern, sporadische Ausfälle(...).
Falls ihr Probleme mit Vibrationen habt, der Generator aber funktionsfähig ist, versucht einfach zwischen den Soundgenerator und die Aufnahme ein bis 2 Unterlegscheiben aus Plastik zu Schrauben. Das hat oftmals das Problem behoben.
Da ich den "Klang" dieses Geräts aber eher als störend empfand habe ich mich dazu entschlossen, das Ding ganz auszubauen. Jetzt kann man in aller Ruhe den klang des Auspuffs genießen.
Was benötigt wird:
- 14mm Nuss mit Rätsche
- 10mm Gabelschlüssel
- Einen Schraubendreher oder Ähnliches
- Klebeband (Position der Wischer markieren)
Zeitbedarf: Ca. eine halbe Stunde, je nachdem wie einfach sich die Wischer entfernen lassen.
Wie immer hoffe ich euch hat das Video gefallen. Wenn ihr mehr Tutorials und Diverses zum N wollt, lasst ein Abo und einen Daumen nach oben da,
falls ihr gerne etwas sehen würdet, Ideen oder Anregungen habt, schreibts in die Kommentare. :)
English:
Note !: For the video, the wipers were disassembled! That could work without disassembly!
In this short tutorial I show you how to remove the sound generator on the Hyundai PD / PDE series.
Parts of the Windshield Noise Fix video were used for the video because I did not want to record everything again (bad weather). For those who know it, just rewind.
Why the whole thing: On the first years of construction, there were sometimes problems with that part from time to time. These include vibrations, rattling, sporadic failures (...).
If you have problems with vibrations, but the generator is functional, just try to screw one or two plastic washers between the sound generator and the mount. This has often solved the problem.
Since I found the "sound" of this device really annoying, I decided to remove the thing completely. Now you can enjoy the sound of the exhaust in peace and quiet.
What is needed:
- 14mm nut with razor
- 10mm wrench
- A screwdriver or similar
- adhesive tape (mark the position of the wipers)
Time required: approx. half an hour, depending on how easy it is to remove your wipers.
As always I hope you liked the video. If you want more tutorials and stuff about the N, leave a subscription and a thumb up,
if you would like to see something, have ideas or suggestions, write in the comments. :)
Music
Song: Good For You - THBD
Source: • Good For You - THBD (N...
Негізгі бет [How To] Soundgenerator ausbauen / Removal am i30N
Пікірлер: 53