Beautiful job my friend. Keep up the great work!!!!
@treysterthepainterturner8404
9 ай бұрын
I preciate it brother I will. 💪🏾
@MargenAuto
9 ай бұрын
One thing I really don't like with the Satajet spray guns. It's the black plastic baffle that they use behind the fluid tip. It's not too expensive to replace it but once it's gone bad you'll have all type of issues with that gun. Anyway you still manage to make it look good. Keep it up 👍🏽👍🏽
@treysterthepainterturner8404
9 ай бұрын
I preciate it bro. I think it’s kuz my gun wasn’t properly cleaned.
@MargenAuto
9 ай бұрын
@@treysterthepainterturner8404 Humm. The way you keep your working area so clean I would never think that the spray gun wasn't properly cleaned.
@treysterthepainterturner8404
9 ай бұрын
@rigalmichel7863 yeah but idk. I haven’t used it after this job. On the next job I used the 3M gun so idk. 🤷🏾♂️
@Bert.adventures
6 ай бұрын
The 45 angle tip is a good tip 👍🏽👍🏽 thanks
@treysterthepainterturner8404
6 ай бұрын
No problem brother. It works big time for blends if u don’t use it u will see that blend because the paint soo concentrated.
@lilearlus4711
9 ай бұрын
Yo yo yoooo. You got the juice now.Nice clean job bro
@treysterthepainterturner8404
9 ай бұрын
Haha. I preciate it bro. 😎 💪🏾
@gregoryjowers3629
9 ай бұрын
Man oh man it turn out great my man.. take care
@treysterthepainterturner8404
9 ай бұрын
I preciate it brother.
@user-xg8po9zv9k
9 ай бұрын
Great work how many years have u been spraying for ?
@treysterthepainterturner8404
9 ай бұрын
Since I was little my dad and 2 uncles trained me. So over 15 to 20 years
@OBPODCAST
9 ай бұрын
Truly enjoy your videos. Did you find out what cause the fan pattern problem?
@treysterthepainterturner8404
9 ай бұрын
I preciate it brother I try my best to make it enjoyable. But I think kuz my him wasn’t properly clean. On the next job I haven’t used it I used the 3M gun to do the white Pacifica.
@sayaadsamad5825
9 ай бұрын
Great work again ,nice to see a young man taking pride in his work. What would you say are the differences between the sata cc gun and the sata jet x 550i . Thanks.
@treysterthepainterturner8404
9 ай бұрын
I preciate it. The difference is the atomization. It atomizes clear so well that u have very very little orange peel that it will come out like glass. Night and day difference. You’ll have to stay with a cc to see what I mean by that. But huge difference.
@sayaadsamad5825
9 ай бұрын
Ok I'll try one out. Thanks again.
@treysterthepainterturner8404
9 ай бұрын
@sayaadsamad5825 no problem
@sayaadsamad5825
9 ай бұрын
You prefer this cc over the iawata series 2?
@treysterthepainterturner8404
9 ай бұрын
@sayaadsamad5825 yeah. But if the had the series 2 I would still get it to compare the 2. But they still don’t have it for the US and won’t sell it from the UK if your in the United States
@anthonysalcido5645
8 ай бұрын
Definitely Nice work bro !! You maybe went to heavy with the wetbed ..and ,did you let it flash off b4 laying down the basecoat 🤔 ?? - from Chandler AZ..30+ paint tech
@treysterthepainterturner8404
8 ай бұрын
The wetbed it’s because the pressure was low and caused it to react. And if the let the wetbed flash u might as well not do wetbed with this paint system because it like it wet. If it’s not wet it start having problems.
@tlilli06
3 ай бұрын
@@treysterthepainterturner8404as a technical specialist currently dealing with spies 480, try not wet-bedding over the repair area. Film build is too much when applying base over the wetbed which can cause modeling. The metallics will slide and loose color position.
@GregoryGreenSr.-vs4ot
9 ай бұрын
I see you got the new paint gun. From what company
@treysterthepainterturner8404
9 ай бұрын
The Sata Jet CC. I bought it from SPSupplies.
@GregoryGreenSr.-vs4ot
9 ай бұрын
Thanks
@treysterthepainterturner8404
9 ай бұрын
@GregoryGreenSr.-vs4ot no problem.
@robertwalter6688
9 ай бұрын
What Hardner are you using with the 923, 365 clear 120 or 130 and what reducer’s
@treysterthepainterturner8404
9 ай бұрын
Both normal hardner and reducer.
@Tyler.56
8 ай бұрын
With the 365 Try 250 hardner with 10%740 reducer
@ajithsurasinghe6854
8 ай бұрын
Good job
@treysterthepainterturner8404
8 ай бұрын
Preciate it.
@latoyawilliams6322
8 ай бұрын
In toronto glasurit told us we have to spray at 29psi with the 5500rp .. how come you spraying at 26pis with the 5500rp ??
@treysterthepainterturner8404
8 ай бұрын
Save more material and not what glasurit told me in the US. Told me 26 to 27 PSi with the Sata RP. But I also don’t play by the rules either.
@jingliao1854
8 ай бұрын
Same here in Toronto they said spray with 29PSI
@treysterthepainterturner8404
8 ай бұрын
@jingliao1854 nope. I don’t spray at 29. And you’ll be going through materials spraying at 29 PSI. I also don’t have color issues or nun spraying at a low pressure.
@user-su5fc1ld9i
4 ай бұрын
Where did you order the RP CC…. Our jobber out here is telling me they never heard of them ? Da Fuc
@treysterthepainterturner8404
4 ай бұрын
🤣🤣🤣 I got it from SPSupplies.
@user-su5fc1ld9i
4 ай бұрын
@@treysterthepainterturner8404 I’m wondering after being out of the trade for sometime….. and presently spraying Spies Hi tech 480. What gun and tip sizes are appropriate for water based
@tlilli06
3 ай бұрын
@@user-su5fc1ld9i spies hecker you need a 1.2 RP for base if using Sata 5000. 1.2 O for 5500.
@americosanchez8228
7 ай бұрын
What's a wet bed is it the blender
@treysterthepainterturner8404
7 ай бұрын
Yeah. Helps u to blend metallic colors est. to keep from having sand piling on the blend area.
@americosanchez8228
7 ай бұрын
Hi there.i got the 90 m-5 clear blender glasurit . I don't know how to use it.i think perhaps u tell me how . Thanks.
@treysterthepainterturner8404
7 ай бұрын
@americosanchez8228 I only have 50, 50x and 40 mb wet bed blender.
@iamthead8831
13 күн бұрын
The 40 wat
@Tyler.56
9 ай бұрын
You for sure over applying the wet bed and that’s what happened when you laid your base down
@treysterthepainterturner8404
9 ай бұрын
Kinda figured that. The 100 line ppl said it has to be wet that why I do that but always having that issue
@Tyler.56
9 ай бұрын
@@treysterthepainterturner8404 it for sure has to be wet but more like medium wet not clear coat wet. You seem to be figuring out as you go! All about trial and error!
@treysterthepainterturner8404
9 ай бұрын
@Tyler.56 exactly. I mean I like the new paint system tho.
Пікірлер: 59