That was probably the best, detailed video on steam bending I’ve ever seen. It would be well worth your time to set up a steam bender similar to yours if you needed to bend maybe more than 10 pieces of wood or so, or if you thought you’d bend approximately the same size wood several times in the future. However, if you only need to bend a piece for a project, all you really need to do is build a quick rectangular box, plug up one end and put a door or plug on the other, similar to yours, but not with the dowels to hold up a shelf, or temperature gages. A steam generator is sweet, but you can essentially use anything to generate steam. I’ve seen guys drape a thick cloth over the open end of the box and place boiling water under the cloth. Not the best method, and you have to continually turn the wood while steaming, but if you have nothing available, it works. I have a small portable steam cleaner that I place in a hole that works great, although I have to push the steam trigger often throughout the process, but I just work on the project and push the trigger
@mohamedabd1176
27 күн бұрын
لكن السؤال اي نوع من الخشب الذي قام بحنيه هل هناك نوع معين من الخشب يمكن حنيه ؟
@t.j.marian7338
10 ай бұрын
Its insane to think that this is how they built Pharoah's chariot incredibly technical and sophisticated
@Mr_Chuckles
6 ай бұрын
Thanks for the video, hope to try this myself very soon! Not to be a troll, but just a note for noob woodworkers: one should not wear gloves while using power machinery, all it takes is a small touch and your whole hand can be pulled into a moving blade.
@kabovasya
9 ай бұрын
Класно получилося!!!!!!!!!!
@gametogether0073
Жыл бұрын
I should be asleep but I couldn't help but watch this video
@steve_bagi
Жыл бұрын
crazy wearing gloves around a drill press
@myhoneyshandmade1077
Жыл бұрын
Great video. Just bought a steamer. Wanting to bend some wood.
@mohamedabd1176
27 күн бұрын
هل كل انواع الخشب يمكن حنيها ام أن هناك نوع من الخشب
@Farih-f6z
Жыл бұрын
What type that wood? Pine wood ok or not?
@Mr_Chuckles
6 ай бұрын
Its walnut, don't see why softwoods wouldn't work too?
@roberttdaniels3857
Жыл бұрын
Any way to steam a complete circle if you have the circumference?
@Mr_Chuckles
6 ай бұрын
You would prob need to make it an inward spiral judging by how the wood relaxed at the end after removing the forme. Probably possible!
@Hydroverse
5 ай бұрын
It's probably more practical to do two half circles. All it adds is one more connection as opposed to trying to get the exact circumference after it expands with one connection.
@davemillan3360
3 ай бұрын
You would overlap the ends on the mold and then after the wood is set make a taper on both ends and glue them up.
@akashdhiman4272
Жыл бұрын
What is tha. Name of wood please
@KevinSmith-qi5yn
10 ай бұрын
It sounded like Walnut
@ConcreteLand
8 ай бұрын
@@KevinSmith-qi5ynI listened carefully and couldn’t hear the wood at all. 🤣🤣🤣
@Mr_Chuckles
6 ай бұрын
walnut
@punchtheball5748
5 ай бұрын
Man I cannot afford all these equipment. And I don’t have a home to put them😂
Пікірлер: 21