Eight years later, this video is still relevant!! It really solved my issue. Thank you!!
@nomatterwatialwayswin
2 жыл бұрын
Cordless Andis master too loud?? Mine are n its driving me nuts. They dont chatter they are just too loud😩😩
@lunaticasai
10 жыл бұрын
The one person who disliked this video probably threw his clippers away before watching the video. Now he's pissed. Great video short and to the point. Godspeed
@bartdiperi9223
4 жыл бұрын
After taking Apart my trimmers for cleaning and reassembling the trimmers they made a shit load of noise and really didn't cut. After watching your video I was able to fix the problem , thanks for video , well done.
@JustBreakingBreadTV
2 жыл бұрын
🤣😂🤣
@chrisgaddy10
Жыл бұрын
A decade later, and this video is still helping! Thank you!
@isaacaugustin2483
3 жыл бұрын
Straight to the point! I almost sent mines in for repair! Now I’m confident on maintaining these!!
@MrBill22s
Жыл бұрын
9 years later and video still going strong. Thanks!
@matthewschuring
10 жыл бұрын
Thank you for all the knowledge bro! You're not just saving me money you're helping me make a little side money! I'm new to barbering and it's really helping me get by until my clientele builds. Thank you for helping me pay my bills!!!!
@keepitsharp357
10 жыл бұрын
your welcome. I am doing what i would want some one to do for me when I was grinding in the shop trying to feed my family
@NYC_Man
9 ай бұрын
Ten years later you saved the day for me. Thank you very much for this video.
@mercuryMAYAN
6 жыл бұрын
Brahhhhh many blessings to you and your children for this gem!
@bocon007
4 жыл бұрын
What a great video! My Andis is 20 years old and i was wearing ear plugs and about to chuck it in the garbage but this video makes it clear why it is so noisy. Thank you!
@wbp9488
7 жыл бұрын
THEE REAL MVP!!!🙌 u don't know how many useless videos....weeks of useless videos I've searched through to fix what u fixed in minutes thanks bro✊🏾
@bksmile22
4 жыл бұрын
You saved my clippers fam. How could anyone dislike this. thanks again G
@keepitsharp357
4 жыл бұрын
Thanks glad it worked out for you
@Dominicocho
3 жыл бұрын
Dooope sheet papá. Eloquent. Informative. Thank you kind hearted gentleman. I love the Eddie Murphy Harlem Nights stache. God bless 🙏 stay healthy my friend 😊
@harryharry3193
2 жыл бұрын
sweet. My Father was a Barber.....heard his making that noise.....he's smiling from heaven now....wish I had his old andis
@lennywilliams2300
5 жыл бұрын
You tha man!.. Was just about to buy a new set bacause of that noise..... Saved me 100 bucks. Thank you very much
@eagleswingswood8979
7 жыл бұрын
man I wish there were more people that told it Straight Like You
@thugassassin
8 жыл бұрын
This video really helped out my clippers and, while I have only tested them a couple of times, I think this adjustment keeps them from grabbing hair. Big thanks!
@copyrock
3 жыл бұрын
You’re a life saver, this has been driving me crazy.
@MarieSansom
8 жыл бұрын
Thank You! This was so helpful! I appreciate you sharing what you have learned with the rest of us.
@rain3743
2 жыл бұрын
I can't believe there was a video on exactly my problem! Thanks!
@MarvelousMarv760
3 жыл бұрын
I like this video, straight to the issue and problem solved, you helped me tremendously, without all the rambling nonsense like other KZitemrs... Peace Brother! Great Job
@mysterybat35
8 жыл бұрын
dude u saved me $100.. and took less than 2 mins. thanks man
@swampthing86_
8 ай бұрын
Heading to fix mine now. You’re a life saver
@dizzolve
8 жыл бұрын
bless your heart! Mine are waking up the neighborhood right now
@luissepulveda2052
5 жыл бұрын
Bobby Vincent jajaja
@TheMrFrank101
5 жыл бұрын
😂
@alexandertorres9469
10 жыл бұрын
I tried the screw in the center & it work perfectly on one of my Masters but the other didn't quite fix the issue but it works just good enough. Thanks I really appreciate the responses.
@davidspl
3 жыл бұрын
Thanks for all your video helping tutorial on haircut machine hello here from Puerto Rico 🇵🇷
@keepitsharp357
3 жыл бұрын
Your welcome bro and thanks for watching
@johnakamatsu4589
4 жыл бұрын
If all youtube videos were this short and effective... Thanks for sharing!
@alexandertorres9469
10 жыл бұрын
Finally some post a video on this issue, it worked for me. Thanks man I appreciate it
@keepitsharp357
10 жыл бұрын
nice happy I could help
@Locoote03
6 жыл бұрын
Yo this saved me a lot of money. I was about to get some new ones.
@AppyTX
5 жыл бұрын
Thank you, simple and to the point! Thus is all i needed to know. 👍
@beargardenroad5469
3 жыл бұрын
I keep learning something new every time .
@gunit140
3 жыл бұрын
Bro you literally saved my life I love you!!!! Hahah
@keepitsharp357
3 жыл бұрын
Happy I could help
@raheenb
2 жыл бұрын
Thanks man, that noise was scaring my toddler!
@MyTSultan
3 жыл бұрын
Thank you so much! It was so annoying to hear that rattling by my ear all the time! Now I just need to buy a replacement screw which fell into a "black hole".
@Spoonylove85
10 жыл бұрын
This fixed the one i just bought on ebay! Thanks a lot man!
@halseyballistic
3 ай бұрын
Outstanding explanation!
@michaelwhite3164
Жыл бұрын
Thank you so much my brother, that absolutely solved my problem. Salute!
@keepitsharp357
Жыл бұрын
Glad I could help
@TheRedmanmark1
10 жыл бұрын
Wow saved me 80$ I was going to buy me a new pair Thanks
@keepitsharp357
10 жыл бұрын
your welcome
@markalexander774
Жыл бұрын
This seems to be a flaw in the design. I would get it if this happened to them after a decade of barbershop, regular use, but mine started doing this on the third time I ever used them. And these things aren't cheap, so why did I spend so much money to buy a pair of clippers that I have to repair this fast? Thanks for the video though, this saved me from trying to return them.
@TransHerring
7 жыл бұрын
awesome video, short and to the point
@TPOOK01
3 жыл бұрын
Thanks! I was about to throw away my second Andis Master.
@k3il
7 жыл бұрын
You rule!! This was incredibly helpful. Cheers!
@ADANESHAL
10 жыл бұрын
thank you thank you very much for sharing, i needed it!!!
@evocre8r
11 жыл бұрын
Awesome thanks! Gonna give it a try on my T-Edger this week. Its been clanking pretty loud lately.
@lumbaracres3587
2 жыл бұрын
good explanation - thank you!
@adriandeveraaa
8 жыл бұрын
amazing bro. very smart. i have another issue though. Even with the blades off completely, the metal near the magnetic coils rattle. Ive adjusted the side screw but it just gets loud and if i losen it up itll be quiet like it should BUT its not tight enough to actually vibrate the mechanism
@cjmastablasta
10 жыл бұрын
And fixed, that was so easy. And I was looking to replace my clipper set.
@keepitsharp357
10 жыл бұрын
nice I am happy for you glad I can help
@zblackrook
8 жыл бұрын
Well gooooood-dam, who would have ever known. Saved me $50.00. Thanks Man....
@desertrose7058
7 жыл бұрын
You just saved the day for me ! Thank you for this!!!! :-)
@atomicsean
6 жыл бұрын
You just saved my day. Thank you!
@amywarren8380
3 жыл бұрын
Thank you! Fixed my problem. :)
@keepitsharp357
3 жыл бұрын
Your welcome
@tommykane8143
8 жыл бұрын
Brilliant advice. My man,
@MILLZx1986
11 жыл бұрын
Try this today and it worked thanks
@gdr4115
10 жыл бұрын
Thank you. Vibration ended with your fix.
@keepitsharp357
10 жыл бұрын
your welcome
@arkdesignsTT
6 жыл бұрын
Dang worked like a charm, thanks buddy
@alvinreviewsthing
2 жыл бұрын
Thanks boss. I couldn't figure out what was wrong with my fade master.
@keepitsharp357
11 жыл бұрын
what kind of clipper is it? if it did not come with a sponge it don't need a sponge. to make it quiet you need to make an adjustment. I can help you if you tell me the kind of clipper it is
@Macx43
9 жыл бұрын
Hey keepitsharp My master cutting blade does not move straight left to right When I cut the power on it seems to drop down a little more on the right side of the moving blade How can I fix it to move evenly? Btw thanks for fixing my andis gtx I sent to you a while back from instagram
@tulipvalley111
2 жыл бұрын
Thank you! Saving us 💰
@shawnearly6572
3 жыл бұрын
Thank u! U are the man
@anthonyestevez5762
3 жыл бұрын
Is this only for corded masters ???
@osogoodairsoft6668
9 жыл бұрын
You've been a great help thanks
@petejones292
8 жыл бұрын
cool little trick that works great. thanks man
@antahmad
11 жыл бұрын
You are a genius. Thank you!
@DJAlax909
4 жыл бұрын
You sir are amazing 🙌
@nomatterwatialwayswin
2 жыл бұрын
Yo thats fire. Can u make a vid for the cordless masters please?!😩😭😭😭😭
@gustavoalvarez8125
3 жыл бұрын
Me funciono muy bien 👍 Y no hablo inglés.
@lavi5hp
9 жыл бұрын
I'm having the same problem with my masters and I've tried this and it's still making that the same noise do you do repairs??
@keepitsharp357
9 жыл бұрын
yes we do repairs you can send them in to us. you also can look at our mater tune up video. it could be the power screw
@FreshPanda17
8 жыл бұрын
Hi, I did the what the video said and it's still making the loud noise ! Please help me fix it
@user-ee4tr3rx7m
6 жыл бұрын
This just helped me....thx
@alexandertorres9469
10 жыл бұрын
Well it worked for one of my Masters. Any idea what else can cause this? I'm still having trouble with my other clipper, it chatters like crazy!
@keepitsharp357
10 жыл бұрын
chattering is usually an issue that can be fixed by adjusting the small power screw. turn that screw with a flat head screw driver. all the way to the right then slowly bring it back until chatter goes away or all the way the left then slowly bring it back until chatter goes away. try that then get back to me
@lunionfaitlaforceilovehait5378
6 жыл бұрын
Great good brother.
@loyalty864
8 жыл бұрын
man, thank u for this video, thumbs up
@eagleswingswood8979
7 жыл бұрын
thank you where are you located?
@Kwamzter
4 жыл бұрын
Worked for me!!!!
@SteveThaBarber
10 жыл бұрын
yo thanks for this video, it was very helpful!
@rafaelt7564
4 жыл бұрын
Just did that it worked easily
@PACIFICBboy
10 жыл бұрын
Thanks man, fixed my issue
@keepitsharp357
10 жыл бұрын
your welcome
@BcCooper
7 жыл бұрын
Thanks for your help.
@rogerjaramillo9472
9 жыл бұрын
You the man bro Saved me some bread
@SouthSideLadyWright
4 жыл бұрын
Thanks for instructions but I threw my clippers away. I cleaned it and the first blade wouldn't fit properly on the yoke and I tried everything but still wouldn't work. I rarely used the clippers but wanted to clean it and now I have to buy a new set.
@americanryan
8 жыл бұрын
Hell yeya. I learned something
@newmusictv2026
9 жыл бұрын
Appreciate the help
@xgcg50
11 жыл бұрын
I'm living outside of the USA and my Andis clipper is making crazy noise. I hear I need to put sponge inside of it to stop the noise. Do you know how this is done?
@EmilEonoe
4 ай бұрын
Thank you.
@DoronBond
8 жыл бұрын
Wow! Thanks! 👊🏽
@joseromero916
2 жыл бұрын
Genius!
@CathyCollazo-x2n
9 ай бұрын
Thank you 😘
@MathiasMedina
8 жыл бұрын
thank you it worked !
@lavaneanderson3661
6 жыл бұрын
Thanks for the info....
@donjekdemarco4900
7 жыл бұрын
it still made noise at the end.. its really a humming type of sound u wanna hear..
@MrLj29128
2 жыл бұрын
What about the cordless ones?
@paulitothegreat4063
4 жыл бұрын
Thank you bro
@fadincomb
7 ай бұрын
Still relevant content.
@brittneyc6275
4 жыл бұрын
Is this for cordless too?
@keepitsharp357
4 жыл бұрын
Not sure. I will buy one and do a work up for it and do a video
@pottershand91
7 жыл бұрын
I just finished watching this video and if the saying no is your Andis Masters makes at the end of this video how can I get it to be quieter
@lazarusflores5240
5 ай бұрын
Thank you
@ShaneGrossdesign
10 жыл бұрын
you just saved me $120!!!
@OR_BLOG
10 жыл бұрын
hi men, i bought a week a go andis fade master so when i turned on for first time the clipper vibrated a lot of so i I adjusted the tourniquet and the noise was less but the blade stopped moving so i cant cut hair noissless. can u help me please? may be i need adjust something but the andis fade master is new.
@keepitsharp357
10 жыл бұрын
this happens allot with new masters. in this case the power screw under the cover have to be adjust as well to get the noise down and keep the power strong
@othonielcervantes4410
5 жыл бұрын
From phoenix tan you 👍
@tomasjc3
10 жыл бұрын
Do you think I can send my clippers to you to be fixed
@keepitsharp357
10 жыл бұрын
Tomas yes. go to 2keepitsharp.com under services our address in up there
Пікірлер: 202