Instead of pouring the leftover into a smaller container, I just put a clear plastic film over the surface of the leftover paint. It minimizes the paint/air contact to prevent the paint from drying. Works well.
@velcroman11
Жыл бұрын
What do you mean. “Put a clear plastic film over the surface.”? Please detail your idea, it sounds interesting.
@stevec9669
Жыл бұрын
@@velcroman11 “clear plastic film” such as a clear plastic wrap used for leftover food, for example. It can be any plastic film. A plastic grocery bag will work too. The plastic is better to be soft and not too thick so that it can fold easily at the transition from the surface of the leftover paint to wall (inside) of the can, so that the plastic film continues onto the wall of the can without any air gap trapped in between.
@joeskis
9 ай бұрын
Well that would mean you'd have to transport it around carefully and you can't really shake the can without having a clump of plastic somewhere inside.
@Stashmo
8 ай бұрын
Sounds impractical and messy.
@Doris-y5v
2 ай бұрын
@@stevec9669 well explained
@GuyNoirxyz
3 күн бұрын
RIP, Ron. Thanks for all the great tips you gave us over the years.
@JustJereInCalif
Жыл бұрын
Ron: you are articulate and well-spoken. You are obviously well-educated, too. It was a pleasure listening to your informative and infinitely useful presentation. Thanks!
@tonyb83
Жыл бұрын
I like the 'masking tape pourer'. To save pouring left over paint into a smaller tin to reduce contact with air, I leave the left over paint in its original tin and put plastic film on top of the paint. Better still I cut out a circle of cardboard the same diameter as the tin, wrap it in plastic kitchen film and put that on top of the left over paint in the tin to keep the air in the sealed tin away from the paint. Feel free to add that idea to your video. All the best Tony.
@spelunkerd
Жыл бұрын
Well explained, with good ideas. Leftover paint left in the can forms a peel of hard paint on top. To stop that, over the past few years I've been placing Saran wrap over top of the paint, so there is a physical boundary between the top layer of paint and the air above. When it comes time to reuse the remaining paint, I lift the Saran wrap off and there is no dry layer of paint on top (and fewer flakes of dried paint to contaminate the remainder). Works great.
@1starshot
Жыл бұрын
Turn the paint tin upside down when storing so skin & air gap will be on bottom when reopening. We used to ask hotel receptionists if they had an old spare stocking or panty hose when decorating hotels, it served 2 purposes, they're great for straining paint through for really fine, lump & dust free paint especially when opening old pre-used tins but most of all it gave you a chance to chat up the girls behind reception for a date :) worked most of the time.
@wayne3754
Жыл бұрын
When you have your paint mixed, have the attendant print you a couple of extra formula labels to put in a note book, and put a piece of clear packing tape over the label on the lid.
@melillykitty9737
28 күн бұрын
I learned the things from this guy I never learned in 12 years of experience previously. Thank you so much
@fransmurati2370
Жыл бұрын
Nice snd concise presentation; Poormans tip: Use an old paint lid, make 2 holes in lid to pour paint, hole in bottom and oppisite side of lid, when done replace the original lid.
@ts-eu6mp
2 жыл бұрын
How cool are these tools?! Ron has been doing this since before he was born! Appreciate him very much! If you don't have one-here's hot to make one-and just like that, boom, a bit of tape, the right color and why-twist, fold, and bra-ca-dabra- Hazelton does it again! Thank you, Ron! TS
@paddlepedal4780
Жыл бұрын
Instead of using a rubber mallet to hammer down the lid, I've been using a length of 2x4 (about 20" long) to press the lid down. Put the can on the floor, set the lid in place, hold the 2x4 at each end and press lid into place as you work it around the perimeter. I find I have more control and do less damage to the can and lid.
@kevinklei3005
Жыл бұрын
Another tip from down under in Australia . 1; mark the can with a "V" with the top of the "V" on the lid and continue the rest of the "V" down the sides . just line up the "V" when replacing the lid to the other 2 marks down the side. This way the lid should always be in the same location . Tip 2 spend a bit if time making a lot wider lid removal tool I have one for smaller cans and another for the larger cans that gives me a lot wider radius area of contact to engage the lid and prevent the problem you highlighted you get with a narrow screw driver type removal tool.
@utubewillyman
Жыл бұрын
So glad Ron is still sharing his skills. I used to watch him on TV but he disappeared from my lineup at some point.
@robertthomas6127
Жыл бұрын
Great advice .... I know because I have been doing much of it for the greater part of my life. In addition I have a recomendation. After preparing the can properly for storage as shown here I lay out an old newspaper, piece of cardbord or such and set the can on it upside down for a day or two to be sure that it is sealed properly. When verified, I store the can upside down until I need it again. With that the air is then actually then in the bottom of the can and can be reopend and used for years. Any skin buildup is now at the bottom of the can. I have been doing it this way for at least 40 years and it has always been sucessful until now. Clean preparation is a must. If you are a sloppy worker I would not recommend this for you. Happy painting.
@mryan4452
3 ай бұрын
Genius... but risky!
@robertthomas6127
3 ай бұрын
@@mryan4452 .... Not at all as long as one prepares the can and lid properly. There is no room for working unclean here.
@mrskravitz1
11 ай бұрын
I learn something new everyday! Thankyou!😊
@AlanScottDavies1957
Жыл бұрын
Excellent tutorial - looks so obvious when an expert tells you about it. Many thanks.
@anthonymiley188
Жыл бұрын
Well and precisely presented. These products should be in every do-it-yourself store.
@ChechiDLR
2 жыл бұрын
Love the concise info.
@lillybell6024
Жыл бұрын
I always put left over paint in a mason jar, label it and keep it in a closet of the room it belongs too. Easy touch ups. Thanks for sharing
@tmeinc
Жыл бұрын
The information on keeping the sealing surfaces clean is great. Keeping air out is not important. Keeping oxygen out is very important. When ready to close the can take a deep breath and hold it as long as comfortable. Exhale into the can and quickly turn away to inhale. This puts CO2 rich air into the can. Seal CO2 in and your paint will last indefinitely. You can also use a CO2 cartridge in a bike tire tool or drink carbonated. The ball bearings don’t sound like a good idea because they can rust in latex paint which will always have entrained oxygen. Marbles, however, do sound like a good idea.
@macroyspencer655
19 күн бұрын
very clear and concise presentation with great tips👍
@tomgorman748
Жыл бұрын
Great tips. I always try to keep the paint can as clean as possible, but sometimes I get a little lazy, especially when I’m in a hurry. I like the idea of transferring to a smaller container when you have less than a half a gallon left for long term storage. And I learned the labeling lesson after painting my whole house after moving in. Trying to remember which can was for which room was really annoying.
@ultraali453
3 ай бұрын
This video is pure gold! The tips are very useful, and I really appreciate that you included alternatives.
@KaioStryker
2 жыл бұрын
Love this. Thanks as always Ron.
@lmcsquaredgreendale3223
Жыл бұрын
Great ideas thank you. I do love that Wipe it Paint Squeegee and the tape best. I've dealt with the other vinyl pouring solutions but I have found that as I paint on my own (I have 2 apartments I lease) the paint on the inside of the can dries or thickens especially when I am cutting in. Both the squeegee and the tape make a lot more sense for me because my house is over 130 years old and I am cutting in around a lot of wood trim. It is beautiful but a pain in the ass and I take my time or I ruin the finish on the wood trim. Love the ball bearings but I would worry that they wood rust over time. I like the marbles idea so I will look into that.
@heatherwolfe329
Жыл бұрын
The marble idea is awesome, thank you! :)
@luxman9463
2 жыл бұрын
Always bringing the useful content!
@H_Artist0432
4 сағат бұрын
Great ideas. Thanks.
@gweggslist4460
4 ай бұрын
Great tips here.. I used to store paint in my heated garage but the metal cans always rust so I started keeping them in my basement furnace room which seems to work well. I know the moisture in the air causes the cans to rust but is there a cheap solution to preventing the cans from rusting? I may try wiping them down with WD40 or some type of oil or spray some type of dry sealer?
@drizler
Жыл бұрын
Oh I like the ball bearings. / marbles idea. That’s slick. I remember now my father painting cars back in the 70s with metallic . He tossed a couple marbles in the paint gun to keep it stirred up.
@rehetzelprdxyw3317
Жыл бұрын
All good tips. One more which I have found to help with paint stored over long periods is to tip the can upside down for a few seconds before storing it away (right side up). The film of paint around the lid seals any small gaps where the rim may have been damaged.
@mryan4452
3 ай бұрын
Simple practical tip 💪 thanks
@davearnold731
Ай бұрын
Very nice video with excellent instructions. Thank you. I feel like the paint manufacturers designed the can to fail so you have to buy paint again after your leftovers get ruined. There really must be a better design if they cared.
@KaylaBuhdayla
2 жыл бұрын
Cool! Thanks for the video!!
@dedethom9
2 жыл бұрын
Great info. Thanks
@graceinguelph
Ай бұрын
Excellent!! I love the tip about the green tape. I’m going to use that one in about an hour. Thanks!
@royfranc
11 күн бұрын
I have left over paint from decorator. The paint is fine but it has dry flakey paint around the rim which drops into the paint. Is there any way of fixing this ,filtering etc. Thanks for the videos
@rosc2022
2 ай бұрын
About the yellow pour spout that wasn't a full circle: You can also use it on quart can, you'll just need to muscle it around the smaller curve. This is very good to know.
@kareno8634
23 күн бұрын
*Thanks!* never have seen pour spout attachment, and Tape, Nice idea.
@mnmi2248
Жыл бұрын
Thank you very much for posting this video for all of us. So helpful!!
@lincolnjoseraad4578
2 ай бұрын
Hi Ron, Thanks a lot for these tips! Sure I'll follow all of them...
@stucook9587
Жыл бұрын
Looked all over for Ron's tools in the UK but cannot find them
@jimirayo
2 жыл бұрын
Excellent info indeed! I need to get me that paint squeegee.
@jsmcguireIII
5 ай бұрын
Thanks Ron. When can you come over get my paints in order?
@edymoss3466
Жыл бұрын
Great video and really great tips I especially like the masking tape pour spout trick Really good idea thanks for sharing
@eternalfizzer
22 күн бұрын
Excellent tips! Especially the last one - now I have a use for the marbles I found digging out my basement ;-)
@savannamc407
Жыл бұрын
Absolutely phenomenal video!! I love this. I seriously was beside myself when the squeegee and pouring spout was introduced. I cannot believe I had no idea theses even existed. But more so, I love the tape idea if you don't have a spout. I just learned so much, thank you!! And Ron, you're awesome.
@Stelios.Posantzis
26 күн бұрын
Excellent tips!
@fredparsons5134
Жыл бұрын
Great painting tips!
@robertpanetta7912
Жыл бұрын
Good tips especially the ball bearings
@SamKGrove
Жыл бұрын
I transfer leftover paint into emptied and rinsed Clorox jugs. Smear paint on the outside and write note on them with a marker.
@patmat.
2 жыл бұрын
Awesome tips, video saved.
@mikmop
Жыл бұрын
What I do to create a spout is take a small pill bottle with a screw on lid and glue it to the lid of the pain can. I then drill a hole in that and this becomes my spout with a screw on air-tight lid.
@gregarmstrong4653
Жыл бұрын
store paint upside down, this way, all the gravity sinks to the bottom, and magically seals the can. not sure this works in Australia though.
@johndufford5561
Жыл бұрын
Very helpful & clear. Thank you, Sir.
@barbaracodner2504
2 жыл бұрын
Great tips!! Thanks for posting.
@gilbertknight6617
2 жыл бұрын
Great tips Thank you very much 🙏 for the useful info
@cynthiaewing6584
Жыл бұрын
Thank you! Fantastically informative video!!! 🎉🎉🎉
@frunomaol5069
Жыл бұрын
Some good tips there, thank you.
@royster3345
Жыл бұрын
I found water based paint would rust the lid and rim, so I now place a plastic carrier bag on the can then apply the lid. You simply trim off the excess plastic then.
@jameskoh2945
Жыл бұрын
Excellent tips.
@joequillun7790
Жыл бұрын
Excellent tips. Thanks.
@mhub3576
Жыл бұрын
As for the environment in which you store paint, do not leave it anywhere it might freeze. Once its been frozen its done for good. Here in MN this is a real concern for anyone thinking of storing their paint in an unheated garage.
@thomask4836
Жыл бұрын
This was very informative! Thank You Sir!
@martinalbert5653
11 ай бұрын
Well done. Thank You.
@mikefitzgerald4278
Жыл бұрын
Thank you Ron! Great video👍 Mike Fitzgerald Calgary Canada 🇨🇦
@thelotteryguycash3mississi661
10 ай бұрын
Very good video video thank you very much . All this information will help me on all my honey due list
@darrenharris6319
Жыл бұрын
great tips thankyou
@horaciocastillo1435
Жыл бұрын
Thanks for this interesting video. I will like to know where can I find those plastic items shown here and the name of each one of the two he used in this video. Thanks in advance to anyone who can answer this question to me. Thanks
@pamelah6431
5 ай бұрын
The pouring spouts I bought do not fit in Pittsburgh paint cans - the round one that goes inside doesn't fit, and the one that snaps on top of the can doesn't, either. Going to have to switch to the paint tape method or change brands.
@jayneela3077
Жыл бұрын
Really great tips. Thanks. 👍
@kerrygleeson4409
Жыл бұрын
Totally correct thanks for sharing your knowledge 🦘
@citaknox8191
Жыл бұрын
Thanks
@petroflorence7962
Жыл бұрын
I also use cling wrap to seal then lid on
@robertthomas6127
Жыл бұрын
I just recalled another thing that I have been using for decades. I keep jars (generally from intant coffee... Maxwell or so) and pour used fluids (mostly terpintine) that are used as thinners, brush clearners and so forth for reuse into them (Not Mixed, but Seperate jars of course!) The paint will settle to the bottom of the glass and the used fluid will swim on top. Every so often I empty as much of the used fluid that is now semi clear into a second jar (filter it through a clean rag) and store it for further use to clean brushes or wipe down a surface that needs to be cleaned before painting or possibly degreased. I wouldn't necesssarily recommend it for thinning new paint to paint a new surface though, but if one wants to try it at their own risk 🤷♂..I have used this for diverse thinners and brush cleaning substances for decades with success and reduced the amount I had to buy of at least 50-75%. I'd rather use the saved money for good quality brushes and rollers IMO. I started this to recycle roughly 40 years ago (when no one was even talking about doing so) and found it to be worth the little additional effort as well as not having to dispose of those substances in fluid form. Back then we didn't have the possibilities we have today to bring them some where. Just be sure to always close the jar tight so that the fluid does not evaporate and you can store the fluid of a longer time. One more Idea..you have paint to dispose of? Keep your sawdust, add it to the paint, let it harden and through it away. 👍
@steven.h0629
Жыл бұрын
Good tips!
@lovewenwin
11 ай бұрын
Thank you 👍🏾
@stucook9587
Жыл бұрын
Looked all over for Jim's tools in the UK but cannot find them
@terrystephens1102
Жыл бұрын
Thanks for some very useful tips 😁👌👌👏👏👏
@jalexander305
2 жыл бұрын
I’m freaking out because I’m on a lunch break from painting my mother in laws house and I was just thinking about storing paint. I don’t know whether it’s luck or creepy Siri is listening.
@gilbertknight6617
2 жыл бұрын
Ron the man to the rescue 😉
@michaelosmon
Жыл бұрын
My mind defaults to the latter
@IRDeezlSmoke
Жыл бұрын
I notice most all of these videos never pour a full can of paint. It's always easier to pour from a half can than a full one.
@mpetersen6
26 күн бұрын
I transfer my left over paint into empty Dutch Boy containers. Has worked well. Paint cans are getting on the flimsy side of things.
@johnburns2940
3 ай бұрын
You Da MAN!! Thanks!! 🙏😊
@teslarex
Жыл бұрын
Great tips
@georgejetson4378
25 күн бұрын
Aside from keeping the paint can rim clean and free of dried paint dribble that keeps the lid from sealing properly, is the problem of rust. Most gallon paint cans are made of cheap metal that rusts over time. The rust flakes off, contaminating the paint. Some, but very few, paint cans have a plastic internal coating that eliminates this problem.
@craighellberg4366
2 жыл бұрын
Great advice.
@williamphillipson548
Жыл бұрын
brilliant...very useful tips //Thanks
@debstokes7439
2 жыл бұрын
I appreciate the info!!! 😊
@diverdave4056
Жыл бұрын
come on now ... seal up the paint can and store it upside down ! if you decide to put the paint in a smaller container - make sure to put a complete description of the brand name - color and sheen of the paint !
@simonfunwithtrains1572
8 күн бұрын
All great tips some I already do, but the paint pouring with tape is a peach.
@patmash
2 жыл бұрын
No need to clean can rims with the new Behr pain cans from HD. Best paint AND cans to date.
@normstavin6290
2 жыл бұрын
Ron ..invented and prototyped plastic lip spout in 1973-4 . My agent at time discouraging pursuing Norm
@bobmac9070
Жыл бұрын
Well that’s all good however anytime you have a metal container that comes in contact with paint, moisture or air….you have a environment for rust from the inside out on metal cans and lid with almost never come off or be destroyed trying to do so. The best solution…. But paint the comes in the newer plastic container s, non rust proof! Any used paint put in smaller plastic jars or containers. It will last a lot longer than metal.
@beerbandit291
2 жыл бұрын
Since I lost my marbles I often forget to clean my rim.
@americafirst2785
Жыл бұрын
You break stay out of the beer joint with that rim,buddy.
@BartAppleseed
4 ай бұрын
Woah Father Fish is very talented
@dtm8073
Жыл бұрын
I put my leftover paint in glass Mason jars, works awesome!
@robertthomas6127
Жыл бұрын
My whole adult life I have cleaned jars from Jam, mustard, pickels and so on in different sizes just for such purposes. Sealing them tight and storing them on their head as I explained above enables me to not only store the content long, but to always easly tell what paint, stain or other substance is in the jar should the label no longer be readable. It is also so much eaiser to see what condition it is in and dispose of it when it is obviously no longer good.
@grom7826
Жыл бұрын
I put a plastic bag over my used paint. I like the marble idea, especially with my air-operated paint can shaker.
@darrennew8211
Жыл бұрын
I really could have used this advice back then. :-)
@GlennLecus
21 күн бұрын
Wise words old timer.. it’s people like you that still give out Good advice and for that I thank you. Go Trump!!
@piper0428
Жыл бұрын
Don’t leave outside, temperature will affect it. Place can inside plastic bag (sealed) during storage.
@MHS_ART
2 жыл бұрын
Omg you live a hour in a half away from me!! I live in griswold!! Wowwww
Пікірлер: 152