Thank you NJS for your great videos, will be watching more soon. Sorry I have to add something to this one.. I just spent the last few days stripping steel parts from my 1981 land rover to send for galvanizing. Like in this video I tried paint stripper, but some parts had several coats of paint, rustproofing and filler putty. If anyone watching this finds that paint stripper does not work for filler & rustproofing.. make sure you remove any fire hazards (fuel tanks, solvent cans, etc) use additional protective gear like welding gloves & use a gas blow torch to burn the filler putty, chisel, painters scraper & wire brush - it will save you a lot of time. Don't use blow torch on delicate steel parts or aluminum as they may warp.
@orlandoprklz3929
3 жыл бұрын
I recommend you use a plastic scrapper. It should be enough and it wont damage your piece :)
@NJSInstructional
3 жыл бұрын
Cheers, good tip.
@JayTwizzle
Ай бұрын
Great suggestion!!!!
@sarablowers3111
23 күн бұрын
Thank you for this video!
@NJSInstructional
21 күн бұрын
Glad it was helpful!
@David-sw3on
Жыл бұрын
Thanks for the Great Video! And some excellent pointers from the comment section also👍😉🇨🇦
@NJSInstructional
Жыл бұрын
Glad it was helpful!
@theropesofrenovation9352
3 жыл бұрын
Guess I'll get my wire wheel. I've done the stripper. Thanks for the vid
@NJSInstructional
3 жыл бұрын
Cheers
@davidrosen4951
Ай бұрын
Just a thought: You assume that being outside protects you from fumes. However, air current can easily carry fumes right to you, rather than away. If you're downwind you'll get substantial exposure. In any case, if you smell it, you're getting exposed. Far safer to use a a respirator. Available at hardware stores. Easy to use.
@NJSInstructional
Ай бұрын
Yes you are right. Outside certainly helps to reduce the level of exposure compared to inside, however, a respirator would also greatly help.
@krausecommercialpainting3359
3 жыл бұрын
Great video. Thanks for posting.
@NJSInstructional
3 жыл бұрын
Thanks for watching!
@jeffdavies9099
2 жыл бұрын
I sprayed a metal fire basket with Hammerite spray paint by mistake.Will this stripper remove it.Thanks.
@chrislewis4830
Жыл бұрын
you shouldnt be painting it on you should be stabbing and dabbing it on with the end of the paint brush to ensure a thick coat if you paint it on then your brisles will be wipeing most of it off but thx for taking the time
@seanwilliams3634
2 жыл бұрын
Absolutely bizarre. Today I used the exact same 4 methods trying to strip 4 layers of pain in a metal bench, and I thought let's look at youtube if chemical stripper works.
@David-sw3on
Жыл бұрын
Lol...that happened to me on a different tangent once also!😅
@consueloetcheverry6868
2 жыл бұрын
hello! I would like to know if it works to remove varnish and paint on wood! Thank you!
@NJSInstructional
2 жыл бұрын
I'm not too sure, I haven't tired it so I can't 100% confirm...
@sunshinec.9733
3 жыл бұрын
I have to remove Black Bull off the barrel of an 1872 Ballard rifle that I assume was applied to preserve blueing. Any suggestions?
@gaijinwolfr3436
2 жыл бұрын
I am doing the same restoration and this might save me hours
@wheretonow3106
3 жыл бұрын
I'm in California. The crap that is available here, I might as well use my tap water.
@MrPomelo555
3 жыл бұрын
😂😂😂
@MurCurieux
4 ай бұрын
I am sure there is some gender neutral green solution out there for ya
@wheretonow3106
4 ай бұрын
@@MurCurieux HaHa California, I get it. Good put down there cowboy. Think of that all by your lonesome?
@corkygidget
6 ай бұрын
This is great, but, they don't sell it in the US.
@Maevic-fg3fm
Ай бұрын
Blasting is better. Lots of shops can do it. Or trade schools sometimes have a set up. There still maybe the odd business of chemical stripping. They use to dip products. I have had queen size metal beds dipped in my past.
@cptbrncls7050
3 жыл бұрын
Paint stripper is a new technique for stripping paint off things?
@orlandoprklz3929
3 жыл бұрын
Nope, its been around for a while already. Its just people dont know it exist such a thing but if you go to school for finishing then its a must to know :)
@every1665
2 жыл бұрын
It was around in the 1960's and it was not described as "new" back then either. But they have come up with several more "environmentally friendly" types since then.
@WaschyNumber1
3 жыл бұрын
Have you tried acetone 🤔
@tinman2420
Жыл бұрын
if the paint is stuck on so good, why bother stripping in the first place, can’t you just paint over it?
@SixtySixteenSix
3 жыл бұрын
After stripping paint from the metal, how should I clean up any chemical residue of the paint remover? Just wipe it down with tissue or rinse it off?
@explorer7787
3 жыл бұрын
Acetone would be the perfect but you probably already figured out and job done since
@orlandoprklz3929
3 жыл бұрын
Acetone is the solvent you'll need and a brush to remove. good luck
@helenflouch
2 жыл бұрын
Metholated spirits.
@markknight6910
Жыл бұрын
Due to the caustic nature, clean up, risk of chemical burns, poisonous fumes and Very high costs for these products... Its much safer and cost effective to find a local shop that does bead/media blasting. With an appointment, you can typically have a part this size back the next day. You can also choose a less or more aggressive finish by deciding what blast material that's used. I tried chemical strip first.. what a mess. Never again
@diggler2002
Жыл бұрын
I used a drill with a wire brush. Got most of it off.
@jeffreyzie
2 жыл бұрын
Thanks for the video. Where’d you find the Poly stripper? I’m trying to find this one in particular but don’t see any stores that sell it Thanks -Jeff
@NJSInstructional
2 жыл бұрын
Hi Jeffry, just from the local hardware store. I purchased this from Bunnings.
@jeffreyzie
2 жыл бұрын
@@NJSInstructional thanks
@kiimmig2293
Жыл бұрын
I just ran across a video saying break fluid is the best.😮
@Catobergcontent
3 жыл бұрын
What if we don’t have any paint stripper thing
@XxJaguar22
3 жыл бұрын
Acetone should work fine, just not as well
@drewrinker2071
Жыл бұрын
Bet this stuff next to impossible to find now
@MrSlushy87
3 жыл бұрын
My paint stripper is even more toxic, it even desolves my gloves in seconds 😁
@KD51LifeofaRacer
3 жыл бұрын
What paint stripper do you use? Link?
@MrSlushy87
3 жыл бұрын
@@KD51LifeofaRacer it is a generic brand from a Swedish home improvement store. I doubt you could get hold of it in the US but if you want to I can look if they still make it.
@Mms_35830
3 жыл бұрын
avez vous un nom celui ci fonctionnerais sur de l'epoxy?
@MrSlushy87
3 жыл бұрын
@@Mms_35830 chisel or sand if it is cured. On porous surfaces like wood or concrete you could get lucky to losen it with a paint stripper or acetone before mecanically removing it. For me, and if the work piece allows it, a heat gun has worked best
@Mms_35830
3 жыл бұрын
@@MrSlushy87 je ne comprend pas tres bien :(
@denvernow7294
3 жыл бұрын
Better video title: "How to ruin a chisel."
@Prairiedrifter1
3 жыл бұрын
My pain stripper is so strong that it will eat through 3 pair of gloves in a few seconds
@orlandoprklz3929
3 жыл бұрын
you need special gloves for the stripper ..the regular ones wont work
@mannymedia
3 жыл бұрын
Sand blaster
@evoxis1058
3 жыл бұрын
Why ain't that wood split tho?
@nachomoma2469
2 жыл бұрын
Try brake fluid
@rottvang
3 жыл бұрын
Sand blast with a soft sand
@kareemmunoz6028
2 жыл бұрын
Where can i do dat
@reliefmango6
10 ай бұрын
Twu💥
@bugmouthready529
3 жыл бұрын
POISON narrrr
@james-xo8qg
7 ай бұрын
this is one of the most useless videos on the internet
Пікірлер: 67