To see more helpful hobby tutorials, check out the playlist HERE: kzitem.info/door/PLHkZacvv71XmGSeB2QUoguWP9dCF1eR4P
@moustacheprime7953
10 күн бұрын
Watched to learn how to strip my old Havoc minis. Subbed for the usage of the Cybernator OST in the background catering to my very specific nerdery
@SnakeWorksStudio
8 күн бұрын
You have a good ear! It was a fantastic game wasnt it?
@moustacheprime7953
8 күн бұрын
@@SnakeWorksStudio One of the best of that generation for sure 😃
@tiavoteary5295
3 ай бұрын
Your “if your enjoying this video” bits always make me laugh 😂 love the channel keep up the awesome content ❤
@SnakeWorksStudio
3 ай бұрын
They are fun to do! Thank you so much. You are very kind!
@funnyman6974
3 ай бұрын
I had to look it up, but in the US we just call it Denatured Alcohol, it's the same thing as Methyl Spirits. (Calling it the Meths might be confusing here, too... lol)
@SnakeWorksStudio
2 ай бұрын
Does it have the weird purple colour over there?
@baddiceroll
Ай бұрын
No, from everything I have been searching today.
@joellucas6167
Күн бұрын
@@SnakeWorksStudio No it's clear. It's also called camping fuel.
@sliven21
3 ай бұрын
Denatured alcohol here in the states. Thank you for the video!!!
@SnakeWorksStudio
2 ай бұрын
no problem y man. I hope you enjoyed it! Are you about to strip some miniatures?
@michaellinford2790
3 ай бұрын
I use meths in an old cooking sauce jar. Uses less liquid and has a better seal to prevent evaporation. Also, if the meths gets a bit too 'dirty', I poor it through a coffee filter 👍🏻
@kwest9747
3 ай бұрын
Not used meths, but I’ve found filtering dettol after a few too many uses helps to make it a bit less gross (idk whether it helps the dettol in any other regard tho tbh).
@SnakeWorksStudio
2 ай бұрын
A coffee filter is a good shout! I think they sell them in my local Sainsbury's! What have you been stripping lately?
@mccahill34
3 ай бұрын
Dettol is what I use overnight - the cocktail sticks are a great tip!
@SnakeWorksStudio
3 ай бұрын
I do like Dettol but I find it a bit messy and goopy.
@BrendanRaymondKoroKoro
3 ай бұрын
Detol is the absolute worst... Dont use it, and dont tell others to use it either...
@electricyarn
15 күн бұрын
Thank you for the advice. I recently found my first minutures, and god, do they need this. Hopefully, i'll get the chance to re paint them sometime next week.
@SnakeWorksStudio
15 күн бұрын
Let us know how it goes!
@baddiceroll
3 ай бұрын
Great video, which is much better than my video. LoL
@SnakeWorksStudio
3 ай бұрын
Thanks! but yours are much better!
@benramos4783
15 күн бұрын
Good video man.
@SnakeWorksStudio
15 күн бұрын
I hope it helps!
@stuartlonnen5355
3 ай бұрын
These videos with Mrs Snake Works has taught me that Marcell has spelling ability almost as bad as me. 😀
@SnakeWorksStudio
3 ай бұрын
I blame the auto correct!
@DJRockford83
3 ай бұрын
The only product I've ever used that actually works as a paint stripper super quick is VMS Clean Slate but again it's expensive. For the gloves you don't need huge ones, just put them as far on your hand as you can easily then blow into the glove near your wrist inflating it a bit and making it super easy to put on 👍🏻
@SnakeWorksStudio
3 ай бұрын
Is that an American brand?
@mallninja3797
3 ай бұрын
Penguins of Madagascar is the best one. The rest are okay. Thanks for the vid btw.
@SnakeWorksStudio
3 ай бұрын
I shall try to watch it! I hope it helps
@mraide
3 ай бұрын
Love your style guys
@SnakeWorksStudio
3 ай бұрын
You are very kind! Thank you!
@GothamAmbService
3 ай бұрын
Yeah definitely like to see comparison video of biostrip vs meths
@SnakeWorksStudio
2 ай бұрын
Ok my man I shall add it to the (ever growing) to do list!
@Gumlass1
3 ай бұрын
Don't use iso or meths in an ultrasonic cleaner. The agitation increases fumes, which are quite flamible
@gdmunn83
3 ай бұрын
This is advised although I’ve done it countless times and never had any fire
@Gumlass1
3 ай бұрын
@@gdmunn83 probably pretty safe if the area is very well ventilated, but I'd avoid it
@gdmunn83
3 ай бұрын
I just keep an eye on it as it’s going. Only takes a couple of mins a cycle in it. Any signs of smoke I would just shut off
@BrendanRaymondKoroKoro
3 ай бұрын
Metho in ultrasonic cleaner is perfectly fine. Stop being a baby... Just dont use the heater otherwise it boils... If you're that worried about the fumes, then dont do it next to your bed or in your dining room table.
@SnakeWorksStudio
2 ай бұрын
Do you just use a normal tub or jar or something?
@TheWhiteLycan
3 ай бұрын
Managine to maintain the bullet hanging is pretty impressive.
@SnakeWorksStudio
3 ай бұрын
I have to admit I never noticed it was on there! Youre right, that was a fragile piece. Are you about to strip some miniatures?
@Quick-Silver206
3 ай бұрын
I felt all ten minutes of this video.
@SnakeWorksStudio
3 ай бұрын
A joyous feeling I hope?
@Quick-Silver206
3 ай бұрын
@@SnakeWorksStudio Anxiously waiting to see if the mini got melted. I haven't had luck with stripping paint off Warhammer plastic in the past. Gonna have to give this weird purple juice a shot.
@pippennator317
3 ай бұрын
I use isopropyl alcohol or a non abrasive degreaser to strip minis. Subbed to help towards the titan goal!
@SnakeWorksStudio
2 ай бұрын
what is a non abrasive degreaser? and thank you! we are inching closer every day!
@xyonblade
3 ай бұрын
My current choice is "L.A's totally awesome " but i don't really have one i would say is best, i like using whatever that works. I don't know if anything called methylated Spirits exists in the US
@mtrhodesy
2 ай бұрын
It’s called de-natured alcohol in the US my friend.
@SnakeWorksStudio
2 ай бұрын
I dont think meths is a million miles away from isopropyl. did I spell that right?
@mtrhodesy
2 ай бұрын
@@SnakeWorksStudio You did, but they have very different properties, iso is pure alcohol and probably a bit gentler, meths is ethanol + other ingredients, and a bit more aggressive. Certainly in the model world anyway.
@grahamroden8897
3 ай бұрын
I use IPA, it’s as good as anything without the mess
@SnakeWorksStudio
2 ай бұрын
I think its a similar product isn't it?
@baddiceroll
3 ай бұрын
A great apologization
@SnakeWorksStudio
3 ай бұрын
I hope I was forgiven!
@baddiceroll
Ай бұрын
We can't stay mad at you 😅
@gdmunn83
3 ай бұрын
Everyone loves bio strip and yes it does strip well but it’s the clean up process after that’s a pain. It leaves a horrid gloopy mess all over the model that’s hard to get off and gets stuck in all the recesses and crevices of the model that you just can’t get out
@SnakeWorksStudio
3 ай бұрын
For real. It’s a pain to work with. Maybe I just use it wrong?
@redgreen09
2 ай бұрын
the reply not working i do not know what have at the show but if have some like ues and the kits and minis need a striping i now know how do it just got what teel the show
@SnakeWorksStudio
2 ай бұрын
How long until the show?
@BackPackBadger
Ай бұрын
Is it safe to leave models in Meths over night? Won't they melt?
@SnakeWorksStudio
Ай бұрын
Plastic is fine. Resin goes soft sometimes
@TB1439
3 ай бұрын
How does it work on resin parts? I have been using break fluid for cars to strip my paints. But for resin, it made it just soft and did not get hard again so had to throw it away.
@SnakeWorksStudio
2 ай бұрын
I find it can make resin go a little rubbery, I have had a little success with very quick dips in and out though.
@TB1439
2 ай бұрын
@@SnakeWorksStudio Okay thanks
@redgreen09
2 ай бұрын
well me plaining on going to a war gaming show in july and sell new and ues stuff thare and might with new know how ues it to get butch of uesed models or re do my old elder army with bad paint sceam i do like
@SnakeWorksStudio
2 ай бұрын
Are you looking for anything in particular there?
@fredox999
3 ай бұрын
A comparison would be nice to see. Haven't tried meths in an ultrasonic cleaner but I've seen comments about not putting isopropyl alcohol in them due to heat being generated and the potential for it to ignite.
@SnakeWorksStudio
3 ай бұрын
Does it get that hot??
@fredox999
3 ай бұрын
@@SnakeWorksStudio the one I have heats up slightly, probably not liquid ignition temperature but the lid probably doesn’t seal as well as your takeaway tub. I’d say chuck it in google and see what it turns up for meths.
@gdmunn83
3 ай бұрын
More warm, I’ve done it countless times and never had an issue
@BrendanRaymondKoroKoro
3 ай бұрын
Dont use the heater then its fine. Dont be a scaredy cat... Its not going to ignite 😅
@bonusbone5118
3 ай бұрын
I like the original paint scheme,its like infared vision
@SnakeWorksStudio
2 ай бұрын
Would you want a squad of them?
@bonusbone5118
2 ай бұрын
@@SnakeWorksStudio yes that would be awesome
@Mattw1987
3 ай бұрын
Think i used the same brand of methylated spirits today ,sure beats dettol with the goop and smell!
@SnakeWorksStudio
3 ай бұрын
The Bird brand? Yes Dettol is horrid stuff
@Mattw1987
3 ай бұрын
@@SnakeWorksStudio Yes the good old bird brand!
@ScottAT
3 ай бұрын
But why? That was the chapter master of the Rainbow Warriors!
@willw1980
3 ай бұрын
It was a chaos marine from The Blorbs and you know it!
@SnakeWorksStudio
2 ай бұрын
Haha he needs to clean his eye lenses 👁️
@chestersleezer8821
3 ай бұрын
Well I have used Super Clean to strip the paint off of hundreds of miniatures and it works perfectly to take paint off of your metal or plastic miniatures since I have done both. As for resin that I do not know. But you will need to wear gloves for when you are cleaning your miniatures after leaving them in it.
@BrendanRaymondKoroKoro
3 ай бұрын
Unfortunately super clean is only available in America. Impossible to get in any other country
@SnakeWorksStudio
2 ай бұрын
What sort of product is super clean?
@BrendanRaymondKoroKoro
2 ай бұрын
@@SnakeWorksStudio its a degreaser
@chestersleezer8821
2 ай бұрын
@@SnakeWorksStudio It is a cleaning product so it is "Super Clean is a brand of cleaning and degreasing products that can be used for a variety of purposes on many surfaces. Super Clean is designed to be fast and easy to use, and can remove grease, grime, oil, wax, dirt, tar, scuff marks, and stains. It's also biodegradable, phosphate-free, and doesn't contain bleach". You still need to wear gloves when cleaning the miniatures after they have soaked in it.
@redgreen09
3 ай бұрын
well thanks fore the tip me got find some the stuff and got have a bad exsues to ues it say an E BAY find but will tune in to nest vid
@SnakeWorksStudio
2 ай бұрын
What are you going to be stripping?
@OddNumber1524
3 ай бұрын
now I just need 20 litres of meths to get enough to clean the tyranid monsters I bought 2nd hand (thinking about trying the goopy stuff so I don't have to submerge them)
@SnakeWorksStudio
2 ай бұрын
Are they all plastic? if so you should be fine.
@OddNumber1524
2 ай бұрын
@@SnakeWorksStudio yeah, it's more about the amount of stuff and the vessel I'd need to submerge stuff around the size of a tyrannofex
@redgreen09
2 ай бұрын
i gess two moth its i july at the lacater convention center in PA USA think the 19th is day i am going to go to con and if show up well say hay be guy with the hat full of pins
@SnakeWorksStudio
2 ай бұрын
Nice. What con is it?
@Flamethrower1942
3 ай бұрын
Probably not a good idea using methylated spirit and a Sonic cleaner combo , Sonic cleaners get hot .
@SnakeWorksStudio
2 ай бұрын
is it like Warm or HOT hot?
@Flamethrower1942
2 ай бұрын
@@SnakeWorksStudio It's warm like tea sat for 10mins , it's probably safe but bit risky to leave unattended would be my suggestion
@redgreen09
2 ай бұрын
i think its calle historc con that ALLLLLL i know be fist time i go shud strd go years a go
@Gumlass1
3 ай бұрын
Isopropyl Alcohol or meths are both good for most paints
@SnakeWorksStudio
2 ай бұрын
Are they similar products?
@Gumlass1
2 ай бұрын
@@SnakeWorksStudio similar yes. Both are types of strong alcohol.
@vincentburroughs7451
3 ай бұрын
go woke go broke, done with warhammer for the time being and any channel that promotes them unsubbed. sorry
@funnyman6974
3 ай бұрын
It's okay, I counteracted your unsub with a sub, like, and a comment down below. :)
Пікірлер: 107