dude your a legend. I've watched a handful of support vids so far, and whilst I understand the basics well now, it never occurred to me that a lower print angle = greater resistance on the plate so using supports to counter this resistance. You've just knocked down a huge wall that was blocking my understanding. thank you.
@tahertinwala6640
Жыл бұрын
hello I am trying to print by using chitu box the print fail in a way it printing but not coming on plate. (object stick in resin tank). I am using prozen mighty 8K. Thank you in advance to help me
@craigv367godsman4
5 ай бұрын
How do you maneuver your view to add supports on the screen? Thank you
@igniize
14 күн бұрын
Grazie a te ho imparato a stampare ❤️ grazie di tutto 💪🎉
@michaelandrade7534
3 жыл бұрын
Great video!!! Very informative.. I learned a lot!!!
@xxxxzorroxxxx
2 жыл бұрын
Nice job , can’t wait for next video part two
@zymetheuy
2 жыл бұрын
Thanks, hmm yeah maybe in the future ✌️
@Paulus449
2 жыл бұрын
Bought my 1st ever printer the other day (Saturn S). This is very helpful, thank you. Do you have to add supports individually to each piece? Or is there a way of auto adding to multiple pieces on the build plate?
@venus9m13
Жыл бұрын
Thank you so much! Awesome video👏🏼
@ghostrangerp.8819
3 жыл бұрын
I really liked your video it was great but I like to know how to take the parts like tge legs...arms and etc and put them together in chitubox or other software if you can help....
@zymetheuy
3 жыл бұрын
Oh ok that's a completely different topic then 😂, I'm a complete noob in that regard. My quick go to when I stick parts together is to move them in chitubox, until they connect perfectly and then save the whole thing as a STL, usually that's good enough. I hope this helps 😉
@Coffeeology
3 жыл бұрын
Thank you for the video. Where did you get the KD/A model? I'd love to print it.
Awesome video !, I have a model I created in zbrush and split it in zbrush also , if I want to print it at big scale in parts which I can attach afterwards how do I rescale one chitubox? I increased the size of the torso but want to make sure all other parts are at correct size to fit , any tips would be awesome dude .my printer is the elgoo Mars .
@zymetheuy
3 жыл бұрын
Thank you 😉, for your model just make sure you keep the same amount of % when you change it in chitubox, I hope thats answered the question 😅.
@K0-z0
Жыл бұрын
You explique bien thanks beaucoup 😁
@TillmannHuebner
3 жыл бұрын
Did you print that girl model? And if so please share the link :)
@zymetheuy
3 жыл бұрын
Yes it's printed too ;) , www.myminifactory.com/object/3d-print-kda-akali-lol-30-cm-model-97212
@cmsanz89
3 жыл бұрын
great video, thanks a lot! could you do one telling about your support settings? i'm going to start printing miniatures and will like to know good settings. Keep it up!
@zymetheuy
3 жыл бұрын
Thank you😉, I will keep in mind the settings when I do another video about supports, quick tip for now, if you print miniatures change the light support setting "upper diameter" to 0.20 it's great and enough for tiny parts.
Пікірлер: 22