Thanks that was great advice I'm towing my envoy home from arizona.tow Dolly.thanks
@josegarza2068
2 жыл бұрын
How do u get it unluck
@themetalmike187
2 жыл бұрын
To shift the transfer case out of NEUTRAL: 1. Set the parking brake and apply the regular brake pedal. 2. Start the vehicle with the transmission in PARK (P). 3. Turn the transfer case knob to the desired shift position (2HI, 4HI or A4WD). 4. Put the transmission in NEUTRAL (N). 5. After the transfer case has shifted out of NEUTRAL, the red light will go out. Shift the transmission lever to the desired position. 6. A reengagement sound is normal when shifting out of NEUTRAL.
@christinamollette1803
2 жыл бұрын
How do you unlock it out of neutral back into drive? Also could you do a video about how to and when to use all the different things? Such as 4 wheel drive and 2 H and all wheel drive?
@themetalmike187
2 жыл бұрын
To shift the transfer case out of NEUTRAL: 1. Set the parking brake and apply the regular brake pedal. 2. Start the vehicle with the transmission in PARK (P). 3. Turn the transfer case knob to the desired shift position (2HI, 4HI or A4WD). 4. Put the transmission in NEUTRAL (N). 5. After the transfer case has shifted out of NEUTRAL, the red light will go out. Shift the transmission lever to the desired position. 6. A reengagement sound is normal when shifting out of NEUTRAL. Shifting to 4HI or A4WD: Turn the knob to 4HI or A4WD. This can be done at any speed and the indicator light will flash while shifting. It will remain illuminated when the shift is complete. Shifting to 2HI: Turn the knob to 2HI. This can be done at any speed. Shifting to 4LO: To shift to 4LO, the vehicle's engine must be running and the vehicle must be stopped or moving less than 2 mph (3.2 km/h) with the transmission in NEUTRAL (N). The preferred method for shifting into 4LO is to have your vehicle moving 1 or 2 mph (1.6 to 3.2 km/h). Turn the knob to 4LO. You must wait for the 4LO indicator light to stop flashing and remain illuminated before shifting your transmission into gear. If you knob to 4LO when your vehicle is in gear and/or moving, the 4LO indicator light will flash for 30 seconds and not complete the shift unless your vehicle is moving less than 2 mph (3.2 km/h) and the transmission is in NEUTRAL (N). After 30 seconds, the transfer case will return to the setting last chosen. Shifting Out of 4LO: To shift from 4LO to 4HI, A4WD or 2HI your vehicle must be stopped or moving less than 2 mph (3.2 km/h) with the transmission in NEUTRAL (N) and the engine running. The preferred method for shifting out of 4LO is to have your vehicle moving 1 or 2 mph (1.6 to 3.2 km/h). Turn the knob to 4HI, A4WD or 2HI. You must wait for the 4HI, A4WD or 2HI indicator light to stop flashing and remain illuminated before shifting your transmission into gear. If the 4HI, A4WD or 2HI knob is turned when your vehicle is in gear and/or moving, the 4HI, A4WDor 2HI indicator light will flash for 30 seconds but will not complete the shift unless your vehicle is moving less than 2 mph (3.2 km/h) with the transmission in NEUTRAL (N). The transfer case on these models is a joke gimmick. If you must use 4WD, NEVER use A4WD. This will burn out the transfer case, as it will be constantly looking for wheel slip and will engage and disengage constantly. If you do use 4HI, stay below 50MPH for the same reasons listed above. They can be expensive to rebuild or replace.
@christinamollette1803
2 жыл бұрын
@@themetalmike187 Thank you for such a detailed answer to my question. I appreciate you explaining it to me where I could understand exactly how it’s done.
@dougd2925
4 жыл бұрын
Thank you
@SueYounce
11 ай бұрын
How do I get the key out without putting it in park
@tirefryers
5 жыл бұрын
“Me likes trailblazers”-Searle
@7798DSDS
2 жыл бұрын
took drive shaft out to eliminate 4 wd. Can out now flat tow in nuetral?
@lamaactior5884
3 жыл бұрын
How unlock?
@themetalmike187
2 жыл бұрын
To shift the transfer case out of NEUTRAL: 1. Set the parking brake and apply the regular brake pedal. 2. Start the vehicle with the transmission in PARK (P). 3. Turn the transfer case knob to the desired shift position (2HI, 4HI or A4WD). 4. Put the transmission in NEUTRAL (N). 5. After the transfer case has shifted out of NEUTRAL, the red light will go out. Shift the transmission lever to the desired position. 6. A reengagement sound is normal when shifting out of NEUTRAL.
@urielhernandezT150
Жыл бұрын
0:33 Isuzu
@curtiswritt8474
5 жыл бұрын
Isuzu Ascender
@TheArredondoenrique
2 жыл бұрын
Thanks, how to unlock neutral?
@themetalmike187
2 жыл бұрын
To shift the transfer case out of NEUTRAL: 1. Set the parking brake and apply the regular brake pedal. 2. Start the vehicle with the transmission in PARK (P). 3. Turn the transfer case knob to the desired shift position (2HI, 4HI or A4WD). 4. Put the transmission in NEUTRAL (N). 5. After the transfer case has shifted out of NEUTRAL, the red light will go out. Shift the transmission lever to the desired position. 6. A reengagement sound is normal when shifting out of NEUTRAL.
@sol7410
9 ай бұрын
LOLOLOL you are suppose to engage each one until you reach 4Lo
Пікірлер: 19