Just lovit. Am late 70’s and struggled with masking and packing tape almost that long. Finally LAST WEEK I bought the dispenser you showed. Had no clue how to use it. When I worked it out it was a godsend but I didn’t know where the end dangled loose or was fixed somehow. You nailed it! (Taped it)
@HaveaBiscuitt
2 жыл бұрын
It made me laugh when he was like “looking good, that’s an attractive looking box for the customer” and everything was crooked lol But it’s just a demonstration and he was in a hurry so I don’t really blame him for not taking too much time on it. Thanks for the tips, especially with the tape gun :)
@DLee1923
2 жыл бұрын
Yeh I noticed the slop job. Actually, the tape gun itself seemed to be loose ! 😂
@Steph_HM
3 ай бұрын
I am about to look for: "how to tape a box beautifully" XD but I also get it was just a quick demonstration.
@kevind1980
2 ай бұрын
Ya that tape job looked like shit. Flaps had a lot of space between. I like my box flaps flush.
@chiccavaquita
2 ай бұрын
Your explanation was solid.
@miguelxmarin
Жыл бұрын
This is the best channel ever
@PumpkinPixie1978
3 жыл бұрын
I'm new at taping boxes at my new job and needed tips on how to tape a box. Thank you. :)
@ShipmateFulfillment
2 жыл бұрын
Glad it was helpful! Thank you so much for watching and good luck at the new job!
@samconstantinou2335
2 жыл бұрын
Can’t thank you enough for making this video you life saver 🙏🏼
@ShipmateFulfillment
2 жыл бұрын
Thanks so much for the kind comment appreciate you watching!
@Bt2027
3 жыл бұрын
Very informative video thank you!
@ShipmateFulfillment
3 жыл бұрын
Thank you so much for watching! We appreciate you!
@marialuisamiranda4271
3 жыл бұрын
Thank you Sir,I get information on preparing my box
@ShipmateFulfillment
3 жыл бұрын
Thank you for watching and good luck with your box!
@dreamingcode
3 жыл бұрын
Thank you for posting this I was using a box that was too big there for the top flaps were crushing in even though they were taped
@lookahere2891
2 жыл бұрын
Thankyou - girl moving out for the first time
@slaptheaskshow130
4 жыл бұрын
Very insightful! Can’t wait to tape my next box!
@sairaguha3595
4 ай бұрын
You are the best at what you do!! tysm!!
@joanneyoung1081
7 ай бұрын
Thank you for info about which side is up and taping.
@sazalimohamedsalleh3970
2 жыл бұрын
Thank you 😊
@nessundorma2000
3 жыл бұрын
Thanks! This was very informative. Really helped me decide what kinds of boxes I need for a big move that includes some very heavy objects.
@ShipmateFulfillment
3 жыл бұрын
Glad to have helped! Good luck with your move!
@sharonliang8721
4 ай бұрын
nice one❤
@elijahfoster2
2 жыл бұрын
I 100% thought this was a greenscreen until 6:07
@ShipmateFulfillment
2 жыл бұрын
Haha, I tried to film while the majority of the staff was on lunch so there weren't too many distractions, but it seems a few came back early and snuck into my shot :)
@Serkunny
3 жыл бұрын
Thank you I was having trouble cutting tape at the end. It wouldn't cut. I will try the technique. Was wondering if you can do a close up of cutting the end
@ShipmateFulfillment
3 жыл бұрын
Hi Serkunny, Thank you for your comment. Sadly I can't really do that without redoing the video, but a few tips. Make sure you are lifting up on the tape away from the box ever so slightly this helps keep the tape tight as well as keeps you from cutting into the box. The biggest thing is to remember you are cutting with the wrist.The cutting teeth on the tapegun are usually at an upwards angle so its important to cut downward rather than outward. Hope this helps and good luck!
@HoangNguyen-hv1qy
2 жыл бұрын
That's a pretty ugly tapping job. His flaps aren't even touching each other and there's a 1/4" gap developing as he goes across the seam. Furthermore, the tape is not applied smoothly on the box and has a ton of creases. A much better way is to fold the flaps and make sure their edges are touching all along the seam. Tape perpendicular to the seam to hold the flaps tight. That way your hands isn't in the way while you trying tape along the seam.
@1107861214ali
3 жыл бұрын
Fantastic thanks
@ShipmateFulfillment
3 жыл бұрын
Thank you so much and thank you for watching!
@r6u356une56ney
3 жыл бұрын
DO NOT STOP and cut the tape just below the side - KEEP GOING, around the OTHER SIDE of the box, all the way AROUND until the tape overlaps where it started. Also, go around the box PERPENDICULAR to the flaps, FIRST.
@conor-_C
2 жыл бұрын
That would be terrible
@HoangNguyen-hv1qy
2 жыл бұрын
Tapping all the way around is difficult when the content of the box is heavy and it's hard to flip the box with one hand while the other is holding the tape gun.
@r6u356une56ney
2 жыл бұрын
@@HoangNguyen-hv1qy How difficult is it when your box bursts open when it is dropped onto a conveyor because it was not taped securely, and the recipient gets an empty box? Or a just a piece of it with the address label, and the contents are long lost? Hint: Set the box on its SIDE, and go around the four sides that are accessible, then turn it onto one of those and do the others.
@katieswanson1329
9 ай бұрын
U also want to make sure your tape gun isn't too loss or too tight
@nabborma
3 жыл бұрын
What is the name or brand of the tape gun you use. Is there a link where i can order?
@ShipmateFulfillment
3 жыл бұрын
Hi Nabil, The tape guns were use here at Shipmate were actually imported by us for our own use at the warehouse so they are not really for purchase anywhere. If you check uline, amazon, or ebay you should be able to find lots of different tape guns depending on your price range. Hope this helps and thank you for watching!
@Patrick19833
Жыл бұрын
You should show DKoldies how to do this. Did you see the way that they tape their boxes?
@chiccavaquita
2 ай бұрын
why not use duck tape? just wondering since it's sturdier?
@conor-_C
2 жыл бұрын
Any tips on setting up tape gun how to stop it tangling
@ShipmateFulfillment
2 жыл бұрын
Hi Conor, I don't have any specific tips on this, however I would say that cheaper tape guns tend to have this problem, you don't have to spend a ton of money to get a good tape gun, but you want one that is well made and doesn't let the tape have too much play in it where it can get tangled. Good luck!
@claudiahansen4938
2 жыл бұрын
Which tape gun is the best?
@mohzakir73
3 жыл бұрын
Thank you Sir, saw someone hiding behind the column...
@ShipmateFulfillment
3 жыл бұрын
First off thank you so much for watching 6:30 in to notice we appreciate it. Our office is actually located through a door behind the back left column and you noticed one of our packers leaving for her lunch break. I didn't notice that before good eyes!
@p24ify
Жыл бұрын
Lmao you sound like Jordan peterson
@user-jv4wf8xu8i
2 жыл бұрын
very messy. I'd like to use a video to train employees but not this video. WAY TOO MESSY.
@Patrick19833
Жыл бұрын
Not as messy as DKOldies' package job lol
@tomlpoez1971
3 жыл бұрын
That a stupid way to tape a box I can tape a box better then that and the the truth
Пікірлер: 51