Did you test your fuel shutoff solenoid and find it to be not working? Check Amazon for a replacement: amzn.to/39xAOLR. Hope the video helped. 👍
@topbuilder3790
3 жыл бұрын
I had a similar problem on a Ford 1920. To test you can run without the solenoid. To temporarily fix while waiting on parts, cut the plunger off and turn off injection pump manually.
@SeidelRanch
3 жыл бұрын
Thanks for the tip.
@ApacheRanch
3 жыл бұрын
Thanks for the video. Debugging these things is a pain.
@SeidelRanch
3 жыл бұрын
Yeah, chasing fuel issues can be a major pain.
@JerichoRally
3 жыл бұрын
This blows my mind. So IF that solenoid, in this case, were to go bad, it's natural state would be to shut fuel off? It's difficult to make that conclusion here because the solenoid is actually operating properly. Great video!
@SeidelRanch
3 жыл бұрын
Yeah, but I think that is how they all work. So if there is no power, it shuts the fuel off. It will only open the fuel if there is power. The shut off solenoid on my John Deere 317 skid steer is the same way. So if it fails, you will probably not be able to start the engine.
@unfknknown9678
Жыл бұрын
@@SeidelRanchif the solenoid wasn't working would the vehicle still start on ether??
@SeidelRanch
Жыл бұрын
@@unfknknown9678 It would try, yes. This cuts the fuel.
@unfknknown9678
Жыл бұрын
@@SeidelRanch my td27 won't even try to fire normally but it'll kinda start for a second with ether sprayed in the intake . Fingers crossed this is my issue then.
@gardencornrobber
2 ай бұрын
And if electricity is leaking and you turn the switch off the machine will continue to run. Im still sear hing for my leak.
@NKPGarage
Жыл бұрын
Good visual of the test. Thanks for making the video!
@SeidelRanch
Жыл бұрын
Glad you liked it!
@jesseallinger9179
2 жыл бұрын
Thanks for the video, it helped me start my excavator
@SeidelRanch
2 жыл бұрын
Glad I could help. Hope it was simple to fix.
@tinotendafukusirayi3483
Жыл бұрын
Useful indeed. Thank you
@SeidelRanch
Жыл бұрын
Thanks. Glad it was helpful.
@erikmallea1014
5 ай бұрын
Thank you
@SeidelRanch
5 ай бұрын
Welcome!
@OldCrowsClassicCars
Жыл бұрын
Perfect!!!
@SeidelRanch
Жыл бұрын
Glad it helped.
@garygearhart1016
Жыл бұрын
That’s what I believe is my problem my solenoid is going bad I can usually hear the sound when I turn the key on you hear solenoid working but now I can’t hear it
@SeidelRanch
Жыл бұрын
Yeah, you can usually hear them pretty clear when that key turns.
@JOSH-bx5wp
10 ай бұрын
Thanks man
@SeidelRanch
10 ай бұрын
You're welcome! Glad it was helpful.
@Kleiminc
Жыл бұрын
Thank you!!
@SeidelRanch
Жыл бұрын
Welcome. Hope it was helpful.
@mikeevansgutierrezcasanas6234
2 жыл бұрын
Thanks... you saved me a world of pain 🤪🤪🤪🤪
@SeidelRanch
2 жыл бұрын
Glad I could help.
@John-xu3jk
Жыл бұрын
so if the selenoid clicks when the key is switched to on, the selenoid is good ....(?)
@SeidelRanch
Жыл бұрын
I would say usually. If you can hear it click, it's probably ok.
@monirulmonimoni9942
Жыл бұрын
Thanks 👍
@SeidelRanch
Жыл бұрын
No problem 👍
@Yoganne777
8 ай бұрын
Intriguing !!!
@SeidelRanch
8 ай бұрын
Thanks for checking it out.
@eagletran9
8 ай бұрын
Thank you sir
@SeidelRanch
8 ай бұрын
Welcome
@christianraubenstine5930
3 жыл бұрын
What did the problem end up being? Did you need to replace the injection pump?
@SeidelRanch
3 жыл бұрын
I had to rebuild the injector pump, yes. It was all clogged up.
@texasboysnyder
3 жыл бұрын
Is the tip magnetic to where it pulls the fuel shut off bar
@SeidelRanch
3 жыл бұрын
Not on mine. This one pushes the valve to shut off the fuel when power is turned off. The valve opens from a spring inside it when the solenoid is powered up.
@MrGireeshpk
Жыл бұрын
How to disassemble solenoid
@SeidelRanch
11 ай бұрын
I don't think they are made to be disassembled. Some may be, but this one was not.
@Dwelly70
3 жыл бұрын
what do you mean when you say "and so fourth " ?
@SeidelRanch
3 жыл бұрын
I mean the engine is attached to the frame and the whole tractor is a ground so the solenoid does not need a ground prong. It only has a positive prong because it's ground is the whole tractor when it's screwed in to the injector pump.
@nimbusxxl-xl4fg
Жыл бұрын
Hallo, wieviel Ampere zieht das Solenoid ?
@SeidelRanch
Жыл бұрын
Ich bin mir nicht sicher, aber es ist sehr wenig.
@armandomaldonado1559
8 ай бұрын
Can you show it what you pulled it out of can you show us where it's located? It's out of the truck. We don't know where you got it.
@SeidelRanch
8 ай бұрын
This one is out of a skid steer. They are usually on the fuel injector housing.
@BriansGemini105MC
Жыл бұрын
The solenoid needs a full twelve volts to work, If the battery is down it wont operate the solenoid,
@SeidelRanch
Жыл бұрын
Yeah, I have noticed some are more open to less than 12 volts than others but pretty much any less than 12.0 volts and you are not starting that machine anyway.
@kenneththompson6543
2 жыл бұрын
I'm having this problem right now.. how do u remove it???
@SeidelRanch
2 жыл бұрын
Mine just unscrewed, but it's different on different machines. Usually you can just unscrew it.
@kenneththompson6543
2 жыл бұрын
@@SeidelRanch I'm trying 2 pull it out of a skidsteer "GEHL" Isuzu engine.. r they hand tightened?? It's giving me a hard time 2 remove cause the space is limited
@SeidelRanch
2 жыл бұрын
@@kenneththompson6543 This one was just tight enough to have to use some pliers, but it was close. I think it's meant to be hand tight on this one. My other skid steer has a hex head on it so you can wrench it out.
@kenneththompson6543
2 жыл бұрын
@@SeidelRanch thank u.. I got it off yesterday.. put the new 1 on 2day.. only 2 find out 1 of the wire that went 2 it is cut somewhere.. so I just spliced it & ran an independent wire 2 the key switch
@ВалерийСоловьев-п4ь
4 ай бұрын
Здравствуйте скажите как сильно он нагревается и не могли бы вы подсказать номер запчасти?😢
@SeidelRanch
4 ай бұрын
Each machine will have its own part number. They should not get very hot.
@frontlinemedia4270
7 ай бұрын
What about a 2 wire solenoid
@SeidelRanch
7 ай бұрын
Then it's usually one negative wire and one positive wire.
@frontlinemedia4270
7 ай бұрын
@@SeidelRanch it's not. They're both orange and connect to two red wires
@frontlinemedia4270
7 ай бұрын
There is also continuity between the two wires
@SeidelRanch
7 ай бұрын
@@frontlinemedia4270 Ok, then it sounds like it really is a one wire but it's just along a route for the power wire. Basically it sounds like there is more than one item powered off that power wire and the solenoid is just one of them.
@mohicanjoe2079
2 жыл бұрын
If you cut the end of that rod off wouldn't the work also?
@SeidelRanch
2 жыл бұрын
I am not sure what you are asking. This solenoid is working properly. Cutting the shaft off would keep the fuel on all the time and could make your engine keep running even with the key turned off.
@mohicanjoe2079
2 жыл бұрын
@@SeidelRanch I'm was saying that if that solenoid started malfunctioning, couldn't a person just snip the end of that needle off untill it got replaced
@SeidelRanch
2 жыл бұрын
@@mohicanjoe2079 IT would probably allow it to start. The issue would be the fuel will still be going to the engine and it would not kill it. Many engines use the fuel shutoff to kill the engine.
@mohicanjoe2079
2 жыл бұрын
@@SeidelRanch that would probably explain the backfire at the end lol....thank you sir
@chrislacosse2560
3 жыл бұрын
It's not a pump it's a fuel shut off solenoid
@SeidelRanch
3 жыл бұрын
Right. Did I say that in the video? If I did I meant solenoid.
@curtishoward5584
5 ай бұрын
Friends B2400 starts runs for few seconds and dies . Starts easy but dies within few seconds. I wonder if this is his problem.
@SeidelRanch
5 ай бұрын
Could be a fuel pump. Usually this keeps it from starting at all.
@curtishoward5584
5 ай бұрын
@@SeidelRanch ya that’s what it seems. Mine will run, starts same as always , but only runs for 5sec maybe then like cutting off key. While it’s running it will throttle up nice n smooth , no fuel knocks , no smoke. I’ll let ya know what the cure was. I may try to get fix it this week.
Пікірлер: 75