@@deffokeerithcan u do how they do the loop on phone chram
@i_quittt
Жыл бұрын
@@Coco_bracelets473its the same thing but where u turn up the volume take off the phone and put the strings through there and put the phone back if that makes sense
@angm2250
Жыл бұрын
That is not a good way just do it the Easy way do and x then tie it then do it again then do the x put in the circle then don’t pull the string yet then do it again 2 times then pull the two strings than repeat and on last time then hide the knot in the beads😊 HOPE THAT HELPS😊 if that Evan made sense
@katelynbealee
11 ай бұрын
BY THE WAY! IF YOU THINK YOUR DONE STRECH IT ABOUT 2-10 TIMES TO SEE IF IT IS STRONG!! (SORRY FOR CAPS)
@justcece_13
Жыл бұрын
Tip: You can add a clear top coat (clear nail polish) on the knot for extra security
@iluvkny11
Жыл бұрын
Some people could be allergic so would use nail glue or bracelet glue
@angm2250
Жыл бұрын
That is what I do and it works really good 👍🏾 I think 🤔
@Jayceeee_bruh
11 ай бұрын
@@iluvkny11probably when you make them for yourself and not other people to be safe😊
@Strawberryyyyyyyyy44
10 ай бұрын
You can also use a lighter
@Jayceeee_bruh
10 ай бұрын
@@Strawberryyyyyyyyy44 oooo that’s smart lol
@hannahsss_tiktoks4u
Жыл бұрын
I do this too! Literally a life saver so my bracelet doesn't fall apart
@sprite_0e
Жыл бұрын
FRR
@lia_slays24
7 ай бұрын
Mine does
@lia_slays24
7 ай бұрын
I copied the knot, but it isn’t secure
@lia_slays24
7 ай бұрын
And the knot is bulky
@ReWildHolisticServices
6 ай бұрын
Like ur profile pic
@hailie.shorts
Жыл бұрын
TIP ONE: •⚡️Tying⚡️• cross the two sides, tuck one side under and pull 3 times tight, tho be careful because if you pull them too tight, they could snap/just fall apart. Once your done tying, make sure it will fit your wrist, then add some clear or white nail polish to the knot to help secure the knots. TIP TWO: •⚡️hiding the knot⚡️• Hiding the knot makes the bracelet look better, so try to grab the little knot and tuck it under the beads, trust me when I say the bracelet looks like it was made by a professional 🫶🏼🫶🏼 TIP 3: •⚡️beads⚡️• If you have clay beads, or really any other beads I would recommend filling the bracelet completely with beads, no empty spots. But DONT fill the whole string because you need some extra string to Tie the bracelet, so make sure to cut string a little longer than you need. I would recommend taking the two sides of string and put the bracelet around your wrist a bit to see if the beads are all the way around. TIP 4: •⚡️string⚡️• I would very personally recommend clear string. But any shade of white, grey, and black works too. If you can, try to avoid any vibrant colored string. DO NOT, and I mean DO NOT use thick hair tie-type material of string, the beads won’t fit! That’s all I got, let me know if I missed anything. ❤❤
@advicewharperrr
8 ай бұрын
Tysm !!!
@StrayKids_hyunlix_the_real
6 ай бұрын
OMG I finally find a good example
@ellareitz
Жыл бұрын
I’d recommend making both sides even with the beads so the knot doesn’t get in the way!! 😊❤
@theangieduust
Жыл бұрын
"how to tie your bracelets!"
@IslaDrawZ
Жыл бұрын
Omg I copied your bracelet by accident 😅 I just used all my pinks and a charm and it turned out the same as yours.. 😆
@Eem116
9 ай бұрын
When I was doing this my bracelet (that took an hour to make) BROKE 😭
@lennonthecat1
Жыл бұрын
Bro i just started mqking braclets and i tie them like how you start crocheting 🧶 😅 because my string doesn’t untie for sum reason
@YourFavAriaa
Жыл бұрын
Or the easiest way to tie a bracelet is, Tie the string in a X and do that about 4 or 5 times!
@Iheartyouforever
Жыл бұрын
I can’t even thank you enough! All my bracelets would always fall off when I tie them. This video really helped me so much! Thank you so so much.
@karivvx1
Жыл бұрын
I recommend checking the amount of beads on both sides so it’s equal bc the knot will be on the way😂❤
@coquettexwony
Жыл бұрын
or you can do a slipknot and make it adjustable (make a knot the the end of the string where theres no knot)
@Cam_justus
Жыл бұрын
You could also tie it 3-4 times!
@ReWildHolisticServices
6 ай бұрын
Agree
@rubberducky1122
Жыл бұрын
Very underrated thanks for the video!
@noooooooooooooooooo144
Жыл бұрын
What do u use for beads and the string? Also how do u make it-
@Winnieplayz.
7 ай бұрын
This tut is not very good for beginners But it works!
@sweetbelly6plays254
Жыл бұрын
Cool!! I tie mine 2 times then put gorilla glue 🦍🤭
@Artworld1011
11 ай бұрын
Can you show the easiest option to make clay bead braclets faster plz make video ❤❤❤❤
@deffokeerith
11 ай бұрын
ok l
@Kooljamgt
4 ай бұрын
“How to tie your *long pause* bracelets 😁”
@imsubbingtoeveryonethatsub8677
Жыл бұрын
This is so confusing can someone explain the last step
@-Art.by.Kay-
Жыл бұрын
U can also use nail glue or nail polish to make sure it’s good
@Shrekita74
Жыл бұрын
They’re gonna hate on me anyways thats why i do what i do!
@Kendall9
Жыл бұрын
OMG U RLY DONT UNDERSTAND HOW MUCH THIS MEANS TO ME I HAVE MADE COUNTLESS BRACELETS N NECKLACES JUST FOR THEM TO ALL FALL APART WHEN I TRY TIEING THEM AND THIS LET ME MAKE MY FIRST BRACELET TYSMMM
@amelia-and-chaos
6 ай бұрын
So helpful thank you so much!
@braceletswithsprite
Жыл бұрын
how long do you make your bracelets?
@JulesS0
Жыл бұрын
Me stuck with loom bands: 💀
@emmajak-pl6gz
Жыл бұрын
THANK YOU I TIED A BRACELET FOR MY BESTIE AND IT UNTIED THAT SAME DAY! NOW I CAN FINALLY MAKE A KNOT!!!
@sofxstrawberries
Жыл бұрын
Try clear nail polish on the knot to harden it (clear glue works too but is slow to dry)
@HandmadebyMaida
Жыл бұрын
Omg sameee! I tried to tie one I’ve been working on foreverrr and it broke, I was so mad so I searched this and it helped so much-
@i_Iik3_cats
Жыл бұрын
hey we have the same bracelet making kit!
@AestheticCookies
Жыл бұрын
Help! I made this bracelet and made the string too short so I don’t have enough room to wrap it around my finger and pull it through. Is there any way I could fix it without taking some beads out?
@deffokeerith
Жыл бұрын
i don’t think so!!! u can try to use nail polish to secure the knot with out trying to thru!
@AestheticCookies
Жыл бұрын
@@deffokeerith oh ok thanks
@preppyg4l
Жыл бұрын
If the knot comes undone and you have done it the correct amount of times i recommended getting a thinner type of string
@BnB.bracelets.1
4 ай бұрын
THANKS MINE WAS SNAPPINGG❤
@PeachesRobloxedits
8 ай бұрын
Thank you so much when i did my bracelets I did not know how to tie then you are a lifesaver
@London70
Жыл бұрын
It doesn’t work :/
@rightyhadastroke
Жыл бұрын
I need a tutorial for the tutorial
@tomytoomy8073
Жыл бұрын
Thanks now I know 😭😭🦋🌈💗💗💗
@ch33seg00se
Жыл бұрын
Thanks! I would normally tie them to the clasp and the ring then hot glue the tied part. Then I just started using elastic
@Florence747
Жыл бұрын
Whait he's only 11?
@Kylee_5889yeah
3 ай бұрын
Im still so confused
@little_b0wz
Жыл бұрын
Why am i the only one that cant tie it,
@Rayy-slayy
Жыл бұрын
This helped so much!
@Ninakiswani2015
4 ай бұрын
Thank you ❤❤❤🎉🎉🎉😊😊😊
@aubrey-qw2ly
Жыл бұрын
Finally a video that worked! ❤
@hi.9585
2 ай бұрын
It doesn't work I made it bigger so i wouldn't be pulling it that much, and when I took it off, it broke and went EVERYWHERE.
@emmyfrr
8 ай бұрын
mine broke ☹️
@jewelerybyzain377
9 ай бұрын
I Reccomend Using Paxcoo String Crystal String is A Little bit Less Stretchier I saw Why i watched on Of Soco Bracelet's Videos and she Said u should use Rubber String Which is Like Paxcoo And Not Crystal String
@Hayl3ymm2
11 ай бұрын
Thank you so much ❤
@Victori168
3 ай бұрын
OMG I always wanted to do this and I bought one but I don’t know how to tie a knot but after I saw this this helped me A LOT! Thank you so much for posting this video ❤
@rafaelachitarra6296
Жыл бұрын
Thank you so much! Your a life saver! I always had problems tying nots! Ty so much, and I'm glad that I made this video have 1.4 k likes, because this deserves so much attention!
@deffokeerith
Жыл бұрын
Glad it helped!
@rafaelachitarra6296
Жыл бұрын
@@deffokeerithit helped a lot!
@lifewchloeeeeeee
Жыл бұрын
999th like!
@krittX5torm
11 ай бұрын
Bro I wasted 24.00 dollars on some dumb clay bead kit I bought like it’s impossible to tie them
@little_b0wz
Жыл бұрын
IM CRYING IVE BEEN LOOKING AT TUTORIALS FOR MORE THAN 3 HOURS IM A STUIP IDIOT THAT KNOWS NOTHING😭😭😭😭😭
@BunnyTheOG
Жыл бұрын
Oh my God thank you, I've dropped my bracelet three times and had to start all over but this is helpful.
@NicoMcAllister
11 ай бұрын
Cute!
@UrfavRosy_
9 ай бұрын
Tysm but lol I couldn't take it seriously with that voice loll but again ty for this hack!!
@xXbarneythedinosaurXx
5 ай бұрын
You can also do crimp beads they are a lifesaver. I love them so much.
@pinkpalmpuffFan-12
2 ай бұрын
Thanks for this video! I am always struggling to tie my bracelets! I am def going to try this out!❤❤
@Sienna974
6 ай бұрын
I already know how to tie my bracelets, but thanks. Everyone should know how to tie their own bracelet if they’re a bracelet maker.
@Goinghosthunting
9 ай бұрын
Tysm! This helped a lot after I made my first bracelet I tied it good but then I couldn’t remember how I tied it again and I was struggling but this helped Ty!
@g00fyg0ob3rswift1e
6 ай бұрын
This helped so much thank you! (im going to the eras tour im bad at making bracelets so this really helped^^)
@Stray_Engene
11 ай бұрын
THANK U SO MUCH i was gonnna cry if i didnt tie my bracelets properly cause its like impossible
@kensleystv8476
8 ай бұрын
Yes I also tie my necklace\braclets this way :) but it’s better if you tie it 3-5 times
@sukhmanpreetkaur558
6 ай бұрын
Or you can do a 1. Grit not 2. surgeons not 3.surgeons not 4. Grit not 5. Grid not ( just in case)or(optional)
@LadyJayne2102
7 ай бұрын
Tip: Put a tiny bit of jewelry glue On the knot to Make it stronger. Just be careful cause that type of glue is very strong
@Marthenajazmin_andbffs
5 ай бұрын
Ty and I RLLY like the braclett/necklace turned out too be I'm so obsessed ty again
@khlolove
8 ай бұрын
idk if u know but you guys also have to put clear nail polish on the knot! if your bracelets/neckless are stretchable then you will have to tie it 2-3 times and put clear nail polish on top of it!👏
@erikaromero4982
4 ай бұрын
But how can you tie it without the knot showing? I’m about to cry because my bracelets look ugly with the string showing
@aditisfunworld7034
5 ай бұрын
u r a life saver my bracelet came out so cute and i just made it while atchng this video i love u so muchhhhh❤️❤️❤️❤️
@kittykeithepascual8065
6 ай бұрын
Thank you❤❤❤ i've been looking for how to tie a bracelet and thank you so much❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ i love you thank you❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@katieslive
Жыл бұрын
Tip: you can also superglue the knot so it is even more secured
@Apartment.213_
Жыл бұрын
Omg thank you SO MUCH ❤ u helped my for my bracelet beads to make it!❤ you're gift from god❤ She tell us about what to do too!
@ZoeyWorks-md2tj
10 ай бұрын
Tysm 💖💖💖💖
@CorineTrossard
4 ай бұрын
THANK YOU SO MUCH IT HELPS FIRST AI THOUGT IT NOT GONNA HELPS BUT YES TRSM❤❤❤❤❤🎉🎉🎉
@Sky-dy7qf
4 ай бұрын
just finished the bracelet for my sister (giving it to her on her birthday) and it literally fell apart
@cocolulu5206
11 ай бұрын
Hi Thank you sooooo much it realy helped i only got these beads today and u realy helped
@SugarmoonTv
4 ай бұрын
I was trying to make a phone charm this really helped me thank you
@-BUUGG-
Жыл бұрын
Thx I have been trying to make a strawberry shortcake bracelet for hours I did it four times but each time it fell apart
@MikaVillas
Жыл бұрын
TYYY
@NotOfficiallDolly
Жыл бұрын
Tysm this helped me so much! I used to struggle tying the bracelet but your vid it helped me so much ty your a life saver!❤😊
@carolesoard3151
5 ай бұрын
I seriously just got a clay bead bracelet kit and made my first bracelet and I tied it, it broke and I was about to cry
@Silentvr121
9 ай бұрын
Thank you so so so much this really helped I couldn’t with the left over right it was so hard for some reason
@ItzMeDiamond.
Жыл бұрын
thank u! edit: WAIT THIS WORKS 2 GOOD!
@Itsella108
Жыл бұрын
I tried this,so many times,I thought I did it,and it exploded and I spent such a long time on the bracelet for my little cousin 💔
@LemonxBlueberry
10 ай бұрын
Ive been try to make the same necklace 8 times but right when i finish i accidentally let go while tying the knot and the whole thing drops
@-sakura-.
7 ай бұрын
You can also do a surgeons knot How to do it: x cross then do as normal but don’t pull the second one down all the way and x cross again and then pull it all the way
@sharifazareen4045
Жыл бұрын
this helped me so much when I used to make it it would always break now that you taught me how to tie am so glad and I was so happy when I did it❤❤❤❤❤
@ommeali5971
Жыл бұрын
A little tip maybe try using elastic string its moree stretchy and doesnt brewk due to stretching trust me try also try white colour string!
@cocokj
Жыл бұрын
Do u do double string on your bracelets if not I can show u how to properly do double string!❤
@Filmedbymeeee
11 ай бұрын
Omg thanks. Im new on clay bead bracelets, and I just got my kit in the mail❤
@Fallvlogss
Жыл бұрын
Girl I was dying cause I did not know how today !! Tysm
@Abbys_Vlog_Channel
11 ай бұрын
How long should I make a standard bracelet and necklace? Thank you!
@22nd_skzoo
8 ай бұрын
At first i said" wow you wrist is big🤨 " then i realized it was a Necklace 😭🤚
@AQUAXU
Жыл бұрын
tyyyy
@ugottaluvleila
Жыл бұрын
Thank you sooo much, this literally helps me so much! Ims aging this video!
@PRXPPYXMXNGO
4 ай бұрын
omgg i commented and just cause of one video im a amazing bracelet make tysm girl
@maybemaple4243
Жыл бұрын
I try but it just falls apart I do it just like u do it what am I doing wrong😢😊
@Savannah.15
Жыл бұрын
And you can put clear nail polish at the end to stay longer as well Hope that helped. ❤
@YourFavTaylorFan
6 ай бұрын
Definitely not a good trip on the ground with beads all over the ground 😢
@PRXPPYXMXNGO
Жыл бұрын
LIKE SAVER TYSM I DID ALL THE OTHER 1 AND MY BRACLET FELL APART AND IVE BEEN WORKING ON I FOR DAYS
Пікірлер: 323